Xvive U3 Wireless Microphone System 2.4GHz XLR Transmitter (U3 TX Only) Instruction Manual

1. паview

The Xvive U3 Wireless Microphone System Transmitter (U3 TX Only) is designed to convert any dynamic microphone into a wireless microphone. Operating on the 2.4GHz band, it provides clear, uncompressed digital audio transmission with ultra-low latency, making it an ideal solution for musicians, venues, and mobile DJs seeking freedom from traditional cables.

Асноўныя характарыстыкі

• 2.4GHz wireless band for optimal microphone wireless performance.
• High-resolution 24-bit/48kHz uncompressed digital audio transmission.
• Ultra-low latency of less than 5ms for real-time performance.
• Reliable RF connection over a 90-foot range (line of sight).
• Supports up to 6 simultaneous channels.
• Two modes: Mic and Line, for versatile compatibility.
• Long-lasting rechargeable battery providing up to 5 hours of operation.

Што ў скрынцы

• Xvive U3 Transmitter (U3 TX Only)
• USB-кабель для зарадкі
• Кіраўніцтва карыстальніка

Image: The Xvive U3 Wireless Microphone System Transmitter (U3 TX Only).

2. Інструкцыі па ўсталёўцы

2.1 Зарадка перадатчыка

Before initial use, fully charge the U3 transmitter. Connect the provided USB charging cable to the charging port on the U3 transmitter and plug the other end into a standard USB power adapter (not included) or a computer's USB port. The LED indicator will illuminate during charging and change color or turn off when fully charged. A full charge provides approximately 5 hours of continuous operation.

2.2 Connecting the Transmitter to a Microphone

The U3 transmitter is designed to plug directly into the XLR output of your dynamic microphone. Ensure the connection is firm and secure. This transforms your wired microphone into a wireless one.

Image: Close-up of the U3 TX unit showing the XLR connector.

2.3 Connecting to an Audio System (Receiver Required)

The U3 TX is a transmitter unit only. To complete the wireless system, you will need an Xvive U3 receiver (sold separately). The receiver connects to your audio mixer, PA system, or active loudspeaker via its XLR output. Ensure the receiver is also powered on and set to the same channel as the transmitter.

2.4 Mode Selection (Mic/Line)

The U3 transmitter features a switch to select between Mic and Line modes. This allows for optimal signal handling depending on your audio source.

• Рэжым мікрафона: Use this mode when connecting to dynamic microphones or for auxiliary output signals from devices such as computers and MP3 players.
• Лінейны рэжым: This mode offers a greater dynamic range and is suitable for handling larger output devices, such as the main output from an audio mixer, to prevent signal clipping or popping sounds.

Image: The U3 TX unit, highlighting the Mic/Line mode switch.

3. Інструкцыя па эксплуатацыі

3.1 Уключэнне/выключэнне сілкавання

To power on the U3 transmitter, press and hold the power button until the indicator lights illuminate. To power off, press and hold the power button again until the lights turn off.

3.2 Выбар канала

The U3 system supports up to 6 simultaneous channels. To select a channel, briefly press the channel button on the transmitter. The channel indicator will change. It is crucial that both the U3 transmitter and its corresponding U3 receiver are set to the exact same channel for proper wireless communication.

3.3 Далёкасць ходу і прадукцыйнасць

The system provides a stable RF connection over a range of up to 90 feet. For optimal performance and to minimize signal drops, maintain a clear line of sight between the transmitter and receiver. Avoid placing large metal objects or other 2.4GHz wireless devices directly between the units, as this can interfere with the signal.

4. Тэхнічнае абслугоўванне

4.1 Сыход за акумулятарам

The U3 transmitter is equipped with a rechargeable Lithium-Ion battery. To maximize battery lifespan, avoid frequent deep discharges. Recharge the unit when the battery indicator shows low power. If storing the unit for an extended period, ensure it has a partial charge (around 50%) and store it in a cool, dry environment.

4.2 Ачыстка і захоўванне

Clean the exterior of the U3 transmitter with a soft, dry cloth. Do not use liquid cleaners, abrasive materials, or solvents, as these can damage the finish or internal components. When not in use, store the U3 in a protective case or bag to prevent physical damage.

Важна: To prevent interference, avoid using the U3 system near other wireless devices operating on the 2.4GHz band. Always follow local regulations for battery handling and disposal.

5. Выпраўленне непаладак

5.1 Агульныя праблемы і рашэнні

• Няма гуку або перарывісты гук:
  • Ensure both the transmitter and receiver (if applicable) are powered on and fully charged.
  • Verify that the transmitter and receiver are set to the exact same channel.
  • Check the distance between the units; ensure it is within the 90-foot range and there are no major physical obstructions.
  • Confirm the microphone is properly connected to the transmitter and the receiver is correctly connected to your audio system.
  • Adjust the Mic/Line mode switch on the transmitter to match your audio source.
• Перашкоды або шум:
  • Change the operating channel on both the transmitter and receiver to find a clearer frequency.
  • Move the U3 system away from other 2.4GHz wireless devices (e.g., Wi-Fi routers, other wireless systems) that may cause interference.
  • Ensure the transmitter and receiver are not too close to large metal objects or walls.
• Кароткі тэрмін службы батарэі:
  • Ensure the unit is fully charged before each use.
  • Battery performance can degrade over time with extensive use; if battery life significantly decreases, contact Xvive customer support for assistance.

6. Тэхнічныя характарыстыкі

7. Інфармацыя аб гарантыі

The Xvive U3 Wireless Microphone System Transmitter (U3 TX Only) comes with a 1-year limited warranty from the date of purchase. Please retain your proof of purchase for all warranty claims. This warranty covers manufacturing defects in materials and workmanship. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

8. Падтрымка кліентаў

For technical assistance, troubleshooting, or warranty inquiries regarding your Xvive U3 Wireless Microphone System Transmitter, please visit the official Xvive website or contact Xvive customer support directly. You can find more information and contact details at the Xvive Store on Amazon.