Thincol Digital Oil Control Valve Meter Nozzle User Manual

1. Прадукт скончыўсяview

The Thincol Digital Oil Control Valve Meter Nozzle is designed for precise measurement and dispensing of various fluids. It features a digital LCD display for accurate readings and an anti-drip design to prevent waste. This nozzle is suitable for a wide range of applications, including filling gear oil, engine oil, and antifreeze.

Figure 1: Thincol Digital Oil Control Valve Meter Nozzle in use.

Асноўныя характарыстыкі:

• Digital LCD Meter: Equipped with a 4-digit easy-to-read LCD screen that displays single fill levels and saves total fill levels. Includes a low battery warning.
• Дызайн супраць кропель: Engineered to be drip-proof and leak-proof, minimizing fluid waste.
• Некалькі адзінак вымярэння: Supports five units: liters, gallons, pints, quarts, and kilograms.
• Высокая дакладнасць: Provides an accuracy of ±0.3%.
• Трывалая канструкцыя: Made from high-quality aluminum alloy for strength and longevity.

2. Інфармацыя па бяспецы

Please read and understand all safety instructions before operating the Thincol Digital Oil Control Valve Meter Nozzle. Failure to follow these instructions may result in injury or damage to the equipment.

• Always wear appropriate personal protective equipment (PPE), such as safety glasses and gloves, when handling fluids.
• Ensure the nozzle is securely connected to the fluid source before operation to prevent leaks.
• Do not exceed the maximum working pressure of 1500 psi (100 bar).
• Use the nozzle only with fluids within the specified viscosity range (8-5000 mPas).
• Avoid operating the nozzle outside the recommended temperature range of -10°C to +50°C.
• Keep the nozzle away from open flames, sparks, and other ignition sources, especially when dispensing flammable liquids.
• In case of a leak, immediately stop operation and address the issue.
• Do not attempt to modify or repair the nozzle yourself. Refer to qualified personnel for service.

3. Кампаненты прадукту

The Thincol Digital Oil Control Valve Meter Nozzle consists of the following main components:

1. Nozzle Spout: The outlet for fluid dispensing, designed with anti-drip features.
2. Digital Flow Meter: Integrated LCD display for measuring and tracking fluid volume.
3. Handle and Trigger: Ergonomic handle with a trigger for controlling fluid flow.
4. Падключэнне на ўваходзе: 3/4 BSP threaded connection for attaching to the fluid supply hose.
5. Падключэнне да разеткі: 1/2 BSP threaded connection at the spout.

Figure 2: Main components of the oil gun nozzle.

Figure 3: Ergonomic handle and trigger for flow control.

4. Інструкцыі па ўсталёўцы

Follow these steps to set up your Thincol Digital Oil Control Valve Meter Nozzle:

1. Распакаванне: Carefully remove the nozzle from its packaging and inspect for any damage. Ensure all components are present.
2. Battery Installation (if required): The digital meter requires batteries for operation. Locate the battery compartment (typically on the back or side of the meter) and insert the required batteries (e.g., 1.5V AAA, as indicated by "1.5V IN SIZE" on some images). Ensure correct polarity.
3. Connecting to Fluid Supply:
   • Identify the 3/4 BSP inlet connection on the nozzle.
   • Connect your fluid supply hose (with a matching 3/4 BSP fitting) to the nozzle's inlet.
   • Ensure the connection is tight and secure to prevent leaks. Use appropriate thread sealant if necessary.
4. Першапачатковая праверка: Before dispensing, ensure all connections are secure and there are no visible signs of damage or leaks.

5. Інструкцыя па эксплуатацыі

This section details how to operate your digital oil control valve meter nozzle.

5.1 Дазаванне вадкасці

1. Position the nozzle spout over the container or inlet where the fluid is to be dispensed.
2. Slowly press the trigger on the handle to begin fluid flow. The digital meter will start displaying the dispensed volume.
3. Control the flow rate by adjusting the trigger pressure.
4. Once the desired volume is dispensed, release the trigger to stop the flow. The anti-drip design will help prevent residual drips.

5.2 Using the Digital Meter

Figure 4: Digital LCD flow meter display.

• Single Fill Display: The main, larger digits on the LCD screen show the volume dispensed during the current operation.
• Total Fill Display: A smaller display typically shows the accumulated total volume dispensed over time. This value is saved even after the nozzle is turned off or batteries are replaced (depending on internal memory).
• Папярэджанне пра нізкі зарад батарэі: If the battery icon or a specific warning appears, replace the batteries promptly to ensure accurate readings.

5.3 Змена адзінак вымярэння

Figure 5: Supported measurement units.

The meter supports Liters, Gallons, Pints, Quarts, and Kilograms. To change the unit:

1. Locate the "UNIT" or "MODE" button on the digital meter.
2. Press the button repeatedly to cycle through the available units until your desired unit is displayed.
3. The meter will automatically save your selection.

5.4 Каліброўка

The nozzle features real-time error coefficient calibration for maintaining accuracy. Refer to the specific instructions on the meter itself or contact support for detailed calibration procedures if you suspect inaccuracies. Typically, a "CAL" button is present for this function.

6. Тэхнічнае абслугоўванне

Proper maintenance ensures the longevity and accurate performance of your Thincol oil gun nozzle.

• Уборка: After each use, wipe down the exterior of the nozzle with a clean cloth to remove any fluid residue. Avoid using harsh chemicals that may damage the finish or seals.
• Праверка герметычнасці: Regularly inspect all connections and the nozzle body for any signs of leaks or drips. Address any leaks immediately by tightening connections or replacing worn seals.
• Замена батарэі: When the low battery warning appears on the LCD, replace the batteries promptly. Use the specified battery type and ensure correct polarity.
• захоўванне: Store the nozzle in a clean, dry place away from extreme temperatures and direct sunlight.

Figure 6: The anti-drip nozzle tip, designed to prevent fluid waste.

7. Выпраўленне непаладак

У гэтым раздзеле прадстаўлены рашэнні распаўсюджаных праблем, з якімі вы можаце сутыкнуцца.

8. Тэхнічныя характарыстыкі

Detailed technical specifications for the Thincol Digital Oil Control Valve Meter Nozzle:

Figure 7: Dimensions of the Thincol Digital Oil Control Valve Meter Nozzle.

9. Гарантыя і падтрымка

Information regarding product warranty and customer support was not provided in the available product data. For warranty details or technical assistance, please refer to the product packaging or contact the manufacturer, Thincol, directly through their official webсайт або каналы абслугоўвання кліентаў.