Сонечны вулічны свяцільня з датчыкам руху LE WL4000 Інструкцыя па эксплуатацыі

1. Уводзіны

This manual provides detailed instructions for the installation, operation, and maintenance of your LE Solar Outdoor Motion Sensor Light, model WL4000. Please read this manual thoroughly before use to ensure proper function and longevity of the product.

Выява 1.1: Канецview of the LE Solar Outdoor Motion Sensor Light WL4000.

2. Асаблівасці прадукту

• Шырокі кут асвятлення: Features 3 adjustable heads providing 270° wide lighting coverage.
• Высокая яркасць: Delivers 1000 lumens of 6500K daylight illumination.
• Эфектыўная сонечная зарадка: Converts sunlight into electricity, charging during the day for night operation.
• Датчык руху PIR: Detects motion within 16-26 feet and a 120° angle, automatically turning the light on.
• Аўтаматычная праца: Stays off during the day, charges in sunlight, and turns on for 20 seconds when motion is detected at night.
• Трывалы і ўстойлівы да надвор'я: IP65 waterproof rating ensures resistance to water, heat, and frost for reliable outdoor performance.
• Лёгкая ўстаноўка: Wireless design requires no household electrical circuit, simplifying mounting with included hardware.

Image 2.1: Product dimensions and adjustable light heads.

Image 2.2: The 270-degree wide lighting angle.

Image 2.3: Motion sensor detection range and angle.

3. Змесціва ўпакоўкі

• LE Solar Outdoor Motion Sensor Light (WL4000)
• Мантажныя прыналежнасці (шрубы і дзюбелі для сцяны)
• Кіраўніцтва карыстальніка

4. Настройка і ўстаноўка

Follow these steps for proper installation of your solar light:

1. Выберыце месца: Select an outdoor location that receives direct sunlight for at least 8 hours a day to ensure optimal charging. The recommended installation height is 1.5-3.5 meters (5-12 feet).
2. Усталюйце Lamp Трымальнік: Use the included screws and wall anchors to securely fix the lamp holder to the desired exterior wall.
3. Актывуйце святло: Locate the power switch on the back of the light unit. Press the button to turn the light ON.
4. Павесьце святло: Carefully hang the solar light unit onto the installed lamp трымальнік.
5. Адрэгулюйце галоўкі святла: Adjust the three light heads and the solar panel to your preferred angles for optimal lighting coverage and sun exposure.

Image 4.1: Step-by-step installation process.

Image 4.2: Fixing the lamp трымальнік з шрубамі.

Image 4.3: Activating the light using the mode switch.

Image 4.4: Hanging the light onto the lamp трымальнік.

5. Інструкцыя па эксплуатацыі

The LE Solar Outdoor Motion Sensor Light operates automatically based on ambient light and motion detection.

• Дзённая праца: The light will remain off during the day and the solar panel will charge the internal battery using sunlight. Ensure the solar panel is clean and exposed to direct sunlight for optimal charging.
• Начная аперацыя: Once it gets dark, the motion sensor becomes active. When motion is detected within its 16-26 ft range and 120° angle, the light will automatically turn on at full brightness.
• Аўтаматычнае адключэнне: The light will automatically turn off approximately 20 seconds after no further motion is detected.

Image 5.1: Solar charging and motion-activated lighting cycle.

6. Тэхнічнае абслугоўванне

To ensure optimal performance and extend the lifespan of your solar light, follow these maintenance guidelines:

• Ачысціце панэль сонечных батарэй: Рэгулярна працірайце сонечную панэль мяккай анучайamp тканінай, каб выдаліць пыл, бруд і смецце. Чыстая панэль забяспечвае эфектыўнае паглынанне сонечнага святла і зарадку.
• Выдаліць перашкоды: Ensure no trees, bushes, or other objects are blocking direct sunlight from reaching the solar panel, especially during peak sunlight hours.
• Праверце на наяўнасць пашкоджанняў: Periodically check the light for any physical damage, loose connections, or signs of wear.
• Ўстойлівасць да надвор'я: The light is designed with IP65 waterproofing, making it resistant to rain, heat, and frost. However, extreme weather conditions may temporarily affect performance.

Image 6.1: IP65 waterproof, heat, and frost resistance features.

7. Выпраўленне непаладак

If your solar light is not functioning as expected, consider the following common issues and solutions:

• Святло не ўключаецца ўначы:
  • Пераканайцеся, што выключальнік сілкавання знаходзіцца ў становішчы ON.
  • Verify the solar panel is receiving sufficient direct sunlight (at least 8 hours) during the day. Relocate if necessary.
  • Check if the solar panel is dirty or obstructed. Clean it thoroughly.
  • Confirm it is dark enough for the light to activate. The light has a built-in photocell sensor.
• Light stays on for a short period or is dim:
  • Insufficient charging due to cloudy weather, shade, or a dirty solar panel. Allow for more charging time or clean the panel.
  • The battery may not be fully charged. Ensure optimal sun exposure.
• Motion sensor is not detecting:
  • Пераканайцеся, што датчык не забіты.
  • Verify the light is installed within the recommended height range (1.5-3.5 meters).
  • Test the sensor by walking within its detection range.

8. Тэхнічныя характарыстыкі

9. Гарантыя і падтрымка

For warranty information or technical support, please contact Lepro Customer Service. Details regarding your product's warranty period can be found with your purchase documentation or by contacting the seller directly. Please retain your proof of purchase for any warranty claims.