Intex Type B Pool Filter Cartridge Instruction Manual

Уводзіны

This manual provides essential information for the proper use and maintenance of your Intex Type B Easy Set Swimming Pool Pleated Replacement Filter Pump Cartridges. These cartridges are designed to ensure clean and clear water for your swimming pool by effectively filtering out debris.

Image: An 8-pack of Intex Type B filter cartridges, ready for use.

Асноўныя характарыстыкі:

• Магутная фільтрацыя: Features 63 pleats designed to trap sand particles, leaves, hair, sediment, and sunscreen, ensuring sparkling blue water.
• Трывалы і шматразовы: Constructed with 13.5 square feet of Dacron filament media for long-lasting durability and reusability after cleaning.
• Аптымальная прадукцыйнасць: Designed to maintain peak pump performance when replaced regularly.
• Ідэальна падыходзіць: Compatible with Intex 633T, 634T, 634RC, CS8111, and CS8221/CS8231 filter pumps.

Настройка

Before installing the filter cartridge, ensure your pool pump system is turned off and disconnected from power. Refer to your specific Intex filter pump owner's manual for detailed safety instructions and pump-specific setup procedures.

1. Падрыхтуйце помпу: Locate the filter housing on your Intex pump. Depending on your model, you may need to unscrew a retaining ring or open a latch to access the cartridge compartment.
2. Выдаліце ​​стары картрыдж (калі ёсць): If replacing an old cartridge, carefully remove it and dispose of it properly.
3. Устаўце новы картрыдж: Place the new Intex Type B filter cartridge into the filter housing. Ensure it sits securely and correctly within the compartment.
4. Абараніце жыллё: Close and secure the filter housing. Tighten any retaining rings or latches firmly to prevent leaks.
5. Выпуск паветра: Before starting the pump, open the air release valve(s) on the pump system. This allows air to escape as water fills the filter housing, preventing airlocks. Close the valves once a steady stream of water emerges.
6. Падключыце харчаванне: Once the cartridge is installed and the housing is sealed, reconnect your pump to the power supply.

Image: Packaging indicating compatibility with Intex pump models 633T, 634T, CS8111, CS8221/CS8231.

Operating the Filter System

The Intex Type B filter cartridge works in conjunction with your Intex filter pump to circulate and clean your pool water. Once installed, the pump draws water through the cartridge, where impurities are trapped by the pleated Dacron media, and then returns clean water to the pool.

• Ensure the pump is running for an adequate amount of time daily to maintain water clarity, typically 8-12 hours depending on pool size and usage.
• Monitor the water flow from your pump's return jet. A reduced flow may indicate a dirty filter cartridge.

Image: Illustration of superior cleaning performance, showing clear pool water.

Тэхнічнае абслугоўванне

Regular maintenance of your Intex Type B filter cartridge is crucial for optimal pool water quality and pump longevity.

1. Рэгулярная ўборка: For extended life and efficiency, hose down the fabric of the filter cartridge regularly to remove trapped debris. This can be done every few days, depending on pool usage and debris levels.
2. Графік замены: Replace each filter cartridge every 2 тыдні for peak pump performance and consistent water clarity. While cleaning extends life, regular replacement ensures the best filtration.
3. захоўванне: If storing the pump and filter for an extended period, ensure the cartridge is thoroughly cleaned and dried before storage to prevent mold or mildew growth.

Выява: буйны план view of the pleated filter media, highlighting its design for trapping impurities.

Image: An icon symbolizing easy maintenance, emphasizing the recommended 2-week replacement cycle for maximum efficiency.

Ліквідацыю непаладак

If you experience issues with your pool's filtration, consider the following common troubleshooting steps related to the filter cartridge:

For more complex issues, consult your Intex filter pump's owner's manual or contact Intex customer support.

Тэхнічныя характарыстыкі

• Нумар мадэлі: 29005E
• Тып фільтра: Type B Pleated Replacement Cartridge
• Памеры: Approximately 10 inches (height) x 5.75 inches (diameter) with a 1.93-inch center core.
• Носьбіт фільтра: Dacron filament media
• Pleat Count: 63 pleats
• Сумяшчальныя помпы: Intex 633T, 634T, 634RC, CS8111, CS8221/CS8231 series filter pumps.
• Weight (8-pack): 8.68 фунта

Image: Detailed dimensions of the Intex Type B filter cartridge.

Гарантыя і падтрымка

Інфармацыя аб гарантыі:

Specific warranty details for Intex filter cartridges are typically provided with the product packaging or can be found on the official Intex webсайт. Калі ласка, захавайце пацвярджэнне пакупкі для любых гарантыйных прэтэнзій.

Падтрымка кліентаў:

For further assistance, technical support, or to purchase additional products, please visit the official Intex webсайт або звярніцеся ў іх аддзел абслугоўвання кліентаў.

Official Intex Store: Крама Intex на Amazon