LEDVANCE 360DEG Wall Sensor Instruction Manual

1. Уводзіны

Thank you for choosing the LEDVANCE 360DEG Wall Sensor. This device is designed to provide efficient and automated lighting control for outdoor environments, enhancing both convenience and energy savings. This manual provides essential information for the safe installation, operation, and maintenance of your sensor.

2. Інфармацыя па бяспецы

Калі ласка, уважліва прачытайце гэтыя інструкцыі па тэхніцы бяспекі перад устаноўкай і эксплуатацыяй. Невыкананне гэтых інструкцый можа прывесці да паражэння электрычным токам, пажару або іншых небяспек.

• Прафесійная ўстаноўка: Installation must be carried out by a qualified electrician in accordance with all local and national electrical codes.
• Адключэнне сілкавання: Always disconnect power at the circuit breaker before installing, servicing, or cleaning the device.
• тtage: Забяспечыць пастаўку абtage matches the device's requirements (230 Volt AC).
• Умовы навакольнага асяроддзя: The device has an IP55 protection rating, making it suitable for outdoor use and protected against dust and low-pressure water jets. However, avoid direct exposure to extreme weather conditions beyond its specified operating range (-20°C to +40°C).
• Мадыфікацыя: Do not modify or alter the device in any way. Unauthorized modifications may void the warranty and create safety hazards.

3. Змесціва ўпакоўкі

Перад пачаткам усталёўкі пераканайцеся, што ўсе кампаненты наяўныя:

• 1x LEDVANCE 360DEG Wall Sensor device

4. Асаблівасці прадукту

• Stand-alone motion and light sensor for wall mounting.
• 360° detection field for comprehensive coverage.
• Optimized for energy saving.
• Three selectable operating modes: continuous light on, activation by motion, or activation by twilight.
• Zero-crossing circuit optimized for the operation of LED luminaires.
• IP55 protection type, suitable for outdoor use.
• Designed to be disassembled for separate control of internal light sources (if applicable).

5. Настройка і ўстаноўка

The LEDVANCE 360DEG Wall Sensor is designed for wall mounting. Refer to the following diagrams and instructions for proper installation.

Малюнак 5.1: Dimensions of the LEDVANCE 360DEG Wall Sensor. The sensor measures 7.6 cm in width, 9.5 cm in depth, and 11.1 cm in height.

Малюнак 5.2: Буйны план view of the LEDVANCE 360DEG Wall Sensor unit, showing its black polycarbonate housing and the spherical detection lens at the bottom.

5.1 Месца мацавання

• Choose a wall location that provides the desired detection coverage. The sensor has a 360° detection field and a maximum detection distance of 10 meters.
• Avoid mounting near heat sources, air conditioning vents, or areas with direct sunlight, as these can interfere with sensor performance.
• Ensure the mounting surface is stable and can support the device's weight (250 grams).

5.2 Электрычнае падключэнне

• ПАПЯРЭДЖАННЕ: Адключыце сілкаванне перад любымі электрычнымі злучэннямі.
• Connect the sensor to a 230 Volt AC power supply.
• Follow the wiring diagram provided with the product packaging for correct connections. Ensure all connections are secure and insulated.
• The zero-crossing circuit is optimized for LED luminaires.

6. Інструкцыя па эксплуатацыі

The LEDVANCE 360DEG Wall Sensor offers flexible operation modes and adjustable settings.

Рэжымы працы 6.1

The sensor features three selectable operating modes:

1. Continuous Light On: The connected light remains continuously on, bypassing sensor detection.
2. Activation by Motion: The connected light turns on when motion is detected within the 360° field.
3. Activation by Twilight: The connected light turns on when ambient light levels fall below a set threshold (twilight) and motion is detected.

Refer to the product's internal settings or external switches (if present) to select the desired mode. Note that some settings may require opening the device, which should only be done by a qualified professional.

6.2 Detection Settings

The sensor allows for adjustment of the light duration after detection:

• Працягласць святла: The duration for which the light remains on after motion detection can typically be set between 2 seconds and 15 minutes. Adjust this setting according to your preference and energy-saving goals.

7. Тэхнічнае абслугоўванне

The LEDVANCE 360DEG Wall Sensor requires minimal maintenance.

• Уборка: Periodically clean the sensor lens and housing with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the polycarbonate material.
• агляд: Regularly inspect the device for any signs of damage or wear. If any damage is found, disconnect power and contact a qualified electrician for repair or replacement.

8. Выпраўленне непаладак

If you experience issues with your LEDVANCE 360DEG Wall Sensor, refer to the following common problems and solutions:

• Святло не гарыць:
  • Праверце, ці падключана і ці працуе блок харчавання.
  • Verify the operating mode is set correctly (e.g., 'Activation by Motion' or 'Activation by Twilight').
  • Пераканайцеся, што зона выяўлення вольная ад перашкод.
  • Adjust the sensitivity settings if available.
• Light stays on continuously:
  • Check if the operating mode is set to 'Continuous Light On'.
  • Ensure no constant motion is occurring within the detection zone.
• Light turns on unexpectedly:
  • Check for environmental factors like moving branches, small animals, or sudden temperature changes that might trigger the sensor.
  • Adjust the sensor's sensitivity or detection range if possible.

Калі праблема не знікне пасля спробы гэтых рашэнняў, звярніцеся ў службу падтрымкі кліентаў або да кваліфікаванага электрыка.

9. Тэхнічныя характарыстыкі

10. Гарантыя і падтрымка

The LEDVANCE 360DEG Wall Sensor comes with a 3-гадовая гарантыя вытворцы з даты пакупкі, якая пакрывае дэфекты матэрыялаў і вырабу пры нармальным выкарыстанні.

For technical support, warranty claims, or further assistance, please visit the official LEDVANCE store or contact their customer service department. You can find more information and contact details on the Фірмовая крама LEDVANCE.

Калі ласка, захавайце пацвярджэнне пакупкі для гарантыйных мэт.