Mumusuki 1.5m G3/4in Universal Washing Machine Inlet Hose

1. Уводзіны

This manual provides essential information for the proper installation, operation, and maintenance of your Mumusuki 1.5m G3/4in Universal Washing Machine Inlet Hose. Please read these instructions carefully before use to ensure safe and efficient performance of the product.

Image 1: The Mumusuki 1.5m G3/4in Universal Washing Machine Inlet Hose, coiled for packaging.

2. Інфармацыя па бяспецы

Заўсёды выконвайце наступныя меры бяспекі падчас усталёўкі і выкарыстання:

• Ensure the water supply is turned off before connecting or disconnecting the hose.
• Do not overtighten connections, as this may damage the hose or fittings.
• Regularly inspect the hose for any signs of wear, cracks, or leaks. Replace immediately if damage is found.
• Do not expose the hose to open flames or extreme heat sources.
• Ensure the hose is not kinked or pinched during installation or operation, as this can restrict water flow or cause damage.

3. Змесціва ўпакоўкі

Пакет павінен змяшчаць:

• 1 x Mumusuki 1.5m G3/4in Universal Washing Machine Inlet Hose

4. Настройка і ўстаноўка

Follow these steps to properly install your washing machine inlet hose:

1. Prepare the Connection Points: Ensure the water supply faucet is turned off. Clear any debris from the faucet outlet and the washing machine inlet valve.
2. Identify Hose Ends: The hose has two distinct ends. One end is a straight threaded connector (G3/4in) designed for the water supply faucet, and the other is an angled connector designed for the washing machine inlet.


Image 2: Both ends of the hose, highlighting the G3/4in inlet thread diameter (25mm) suitable for faucets with a water diameter less than 18mm.

3. Connect to Water Supply Faucet: Attach the straight threaded end of the hose to your water supply faucet. Ensure the rubber washer is properly seated inside the connector. Hand-tighten the connection, then use a wrench to tighten an additional quarter to half turn. Do not overtighten. This connector is designed for a G3/4in thread diameter (approximately 25mm) and is suitable for faucets with a water outlet diameter less than 18mm.


Малюнак 3: Падрабязны view of the G3/4in threaded connector, showing the internal mechanism for faucet attachment.

4. Падключэнне да пральнай машыны: Attach the angled connector end of the hose to the water inlet valve on your washing machine. Hand-tighten the connection securely.


Image 4: Close-up of the angled connector, which connects to the washing machine's water inlet.



Image 5: The hose being connected to the washing machine's water inlet.

5. Праверце ўцечкі: Once both ends are connected, slowly turn on the water supply to the faucet. Inspect both connections for any signs of leaks. If leaks are present, turn off the water supply and re-tighten the connections.


Image 6: The washing machine inlet hose fully installed, connecting the faucet to the washing machine.

5. Аперацыя

After successful installation and leak check, the hose is ready for use. Simply operate your washing machine as usual. The hose is designed to withstand typical washing machine operating pressures and temperatures.

Image 7: A user interacting with a washing machine, demonstrating typical operation with the hose installed.

6. Тэхнічнае абслугоўванне

To ensure the longevity and proper function of your inlet hose:

• Рэгулярны агляд: Periodically check the entire length of the hose and its connections for any signs of wear, cracks, bulges, or leaks. It is recommended to inspect at least once every six months.
• Уборка: If mineral deposits or debris accumulate at the connection points, turn off the water supply, disconnect the hose, and clean the fittings with a soft brush and mild detergent. Rinse thoroughly before reattaching.
• Пазбягайце перагінаў: Ensure the hose is not sharply bent or kinked, as this can weaken the material over time. The hose is flexible but should not be subjected to extreme angles.

7. Выпраўленне непаладак

If you encounter issues with your washing machine inlet hose, consider the following:

• Уцечкі ў злучэннях:
  • Ensure connections are tightened properly (hand-tight plus a quarter to half turn with a wrench).
  • Check that rubber washers are correctly seated and not damaged. Replace if necessary.
• Нізкі расход вады:
  • Verify that the water supply faucet is fully open.
  • Check for kinks or blockages in the hose.
  • Inspect the inlet screens on the washing machine and faucet for debris.
• Пашкоджанне шланга: If the hose shows any signs of physical damage (cracks, bulges, fraying), it must be replaced immediately to prevent water leaks and potential property damage.

8. Тэхнічныя характарыстыкі

Technical details for the Mumusuki Washing Machine Inlet Hose:

Image 8: The hose with its length clearly indicated as 1.5m / 4.9ft.

9. Інфармацыя аб гарантыі

For specific warranty details, please refer to the documentation provided at the time of purchase or contact your retailer. Warranty terms typically cover manufacturing defects under normal use conditions.

10. Падтрымка

If you have any questions, require technical assistance, or need to report an issue, please contact the retailer from whom you purchased this product. You may also visit the Mumusuki store page for additional product information.

Mumusuki Store: https://www.amazon.com/stores/Mumusuki/page/88BFE561-D214-4508-9DC9-6EF1CE96F894