ADTRAN NetVanta 1560-08-150W 12-Port Managed Layer 2/3 Gigabit Ethernet Switch User Manual

1. Уводзіны

This manual provides comprehensive instructions for the installation, operation, and maintenance of the ADTRAN NetVanta 1560-08-150W 12-Port Managed Layer 2/3 Gigabit Ethernet Switch. The NetVanta 1560 series is designed for enterprise networks requiring high-performance, reliable, and scalable switching solutions with advanced multi-layer capabilities and Power over Ethernet Plus (PoE+) support.

Key features include Layer 2/3 switching, Gigabit Ethernet ports, SFP/SFP+ uplink ports, PoE/PoE+ power delivery, and robust management options via Web GUI, CLI, and SNMP.

2. Інфармацыя па бяспецы

• Электрабяспека: Пераканайцеся, што крыніца харчавання адпавядае аб'ёмуtage requirements of the switch (240 Volts). Use only the provided power cord or an approved replacement. Do not operate the device with a damaged power cord or plug.
• Вентыляцыя: Maintain adequate airflow around the switch to prevent overheating. Do not block ventilation openings.
• Асяроддзе: Install the switch in a dry, well-ventilated area, away from direct sunlight, heat sources, and excessive dust or moisture.
• Зазямленне: Пераканайцеся, што прылада належным чынам зазямлена, каб пазбегнуць паражэння электрычным токам.
• Абслугоўванне: Refer all servicing to qualified service personnel. Do not attempt to open or repair the device yourself.

3. Настройка і ўстаноўка

3.1 Распакаванне

Carefully unpack the switch and verify that all components are present. Retain the packaging materials for future transport or storage.

3.2 Фізічная ўстаноўка

The NetVanta 1560-08-150W switch can be installed in a desktop, wall-mount, or rack-mount configuration. Ensure the chosen location provides adequate ventilation and access to power and network cabling.

• Desktop: Пастаўце выключальнік на роўную ўстойлівую паверхню.
• Wall-mount/Rack-mount: Use the appropriate mounting hardware (sold separately) and follow the instructions provided with the kit.

3.3 Падключэнне сілкавання

1. Connect the power cord to the power inlet on the rear panel of the switch.
2. Падключыце другі канец шнура сілкавання да заземленай электрычнай разеткі.
3. The switch will power on automatically. Observe the System LED on the front panel.

3.4 Падключэнне сеткавых кабеляў

Connect Ethernet devices (computers, servers, access points) to the 10/100/1000Base-T access ports using standard RJ-45 Ethernet cables. For uplink connections to other network devices, use the SFP/RJ45 combo 1GigE uplink ports.

Малюнак 1: Front panel of the ADTRAN NetVanta 1560-08-150W switch. This image displays the front panel of the ADTRAN NetVanta 1560-08-150W switch. It features 8 Gigabit Ethernet ports, 2 SFP/RJ45 combo uplink ports, a console port, a micro USB port, and LED indicators for system status, link/activity/speed, and PoE.

3.5 Пачатковы доступ да канфігурацыі

The switch can be configured via the Command Line Interface (CLI) using the console port or through the Web-based Graphical User Interface (GUI).

• Доступ да каманднага радка: Connect a console cable from your computer to the switch's console port. Use a terminal emulation program (e.g., PuTTY) with appropriate settings (typically 9600 baud, 8 data bits, no parity, 1 stop bit, no flow control).
• Web Доступ да GUI: Connect a computer to any Ethernet port on the switch. The switch will typically obtain an IP address via DHCP or use a default IP address. Refer to the ADTRAN documentation for the default IP address and login credentials.

4. Інструкцыя па эксплуатацыі

4.1 Уключэнне/выключэнне сілкавання

Once connected to power, the switch will automatically power on. To power off, disconnect the power cord. There is no dedicated power button.

4.2 Святлодыёдныя індыкатары

Святлодыёды на пярэдняй панэлі паказваюць інфармацыю пра стан:

• СІСТЭМНЫ СВЯТЛОДЫЁД: Indicates overall system status (e.g., solid green for normal operation).
• LINK/ACT/SPD LEDs (per port): Indicate link status, activity, and speed for each Ethernet port.
• Святлодыёд PoE (на порт): Indicates Power over Ethernet status for ports supporting PoE/PoE+.

4.3 Інтэрфейсы кіравання

• Інтэрфейс каманднага радка (CLI): Provides full control over the switch's features. Accessible via the console port (RJ-45) or SSH.
• Web Графічны інтэрфейс карыстальніка (GUI): Offers an intuitive web-based interface for configuration and monitoring. Accessible via a web браўзер.
• SNMP: Supports network management systems for monitoring and configuration.

4.4 Асноўныя магчымасці

• VLANs (802.1Q): Segment network traffic for improved security and performance.
• Якасць абслугоўвання (QoS): Prioritize critical traffic like Voice over IP (VoIP) for optimal performance.
• Link Aggregation (802.3ad LACP): Combine multiple physical links into a single logical link for increased bandwidth and redundancy.
• Spanning Tree Protocol (STP, RSTP): Прадухіляе зацыкленне сеткі і забяспечвае рэзерваванне шляхоў.
• Адсочванне IGMP: Аптымізацыя дастаўкі шматадреснага трафіку.
• Power over Ethernet (PoE/PoE+): Deliver power to compatible devices (e.g., IP phones, wireless access points) directly over Ethernet cables. The switch provides up to 30 watts per port, with a maximum of 150 watts for the entire switch.

5. Тэхнічнае абслугоўванне

5.1 Абнаўленне прашыўкі

Periodically check the ADTRAN support website for the latest firmware updates. Keeping the firmware current ensures optimal performance, security, and access to new features. Follow the instructions provided with the firmware update package carefully.

5.2 Ачыстка

To clean the exterior of the switch, use a soft, dry cloth. Do not use liquid or aerosol cleaners, as they may damage the device. Ensure ventilation openings remain clear of dust and debris.

5.3 Экалагічныя меркаванні

Ensure the operating environment remains within specified temperature and humidity ranges to prevent damage and ensure reliable operation.

6. Выпраўленне непаладак

This section addresses common issues you might encounter with the ADTRAN NetVanta 1560-08-150W switch.

6.1 Няма харчавання

• Пераканайцеся, што шнур харчавання надзейна падключаны як да выключальніка, так і да спраўнай электрычнай разеткі.
• Праверце разетку з дапамогай іншай прылады, каб пераканацца ў яе працаздольнасці.
• Ensure the System LED on the front panel is illuminated.

6.2 Няма злучэння на порце

• Check the Ethernet cable connection at both ends (switch port and connected device).
• Пераканайцеся, што падключаная прылада ўключана і працуе належным чынам.
• Try a different Ethernet cable or switch port.
• Verify the Link/Act/SPD LED for the specific port.

6.3 Праблемы з падключэннем да сеткі

• Confirm IP address settings on the switch and connected devices.
• Check VLAN configurations if network segmentation is in use.
• Verify gateway and DNS settings.
• Consult the ADTRAN documentation for advanced diagnostics.

6.4 Скід перамыкача

The switch may have a reset button (often recessed) on the front or rear panel. Refer to the device's specific documentation for instructions on performing a factory reset, as this will erase all configurations.

7. Тэхнічныя характарыстыкі

8. Гарантыя і падтрымка

For detailed warranty information and technical support, please refer to the official ADTRAN website or contact ADTRAN customer service. Keep your purchase receipt for warranty claims.

АДТРАН Webсайт: www.adtran.com