Fire Cam Onyx 4K Helmet Camera User Manual

Уводзіны

This manual provides comprehensive instructions for the Fire Cam Onyx 4K Helmet Camera. Please read this manual thoroughly before using your device to ensure proper operation and to maximize its performance and longevity. The Fire Cam Onyx 4K is designed for recording high-definition video in demanding environments, particularly for firefighters.

Змест пакета

Upon opening your Fire Cam Onyx 4K package, verify that all the following items are included:

• Fire Cam Onyx 4K Helmet Camera
• 32GB U3 Micro SD Card with Adapter
• 2 Rechargeable 3.7V Li-Po Batteries
• BlackJack Fire Cam Mount for US style fire helmets
• Water Resistant Cap (for audio recording)
• Waterproof Cap (no audio, for underwater use up to 30 feet)
• Spare Waterproof O-rings
• 2 Spare Glass Lenses
• Кабель USB
• Зарадная прылада пераменнага току

Прадукт скончаныview

The Fire Cam Onyx 4K is a robust helmet camera engineered for reliability and high-quality video capture in challenging conditions. Its design focuses on durability, ease of use, and superior video performance, especially in low-light environments.

Figure 1: Fire Cam Onyx 4K Helmet Camera with its mounting bracket. This image shows the compact cylindrical camera body and the robust mount designed for secure attachment.

Асноўныя характарыстыкі:

• Запіс відэа 4K: Captures video at 4K resolution (30FPS) for exceptional clarity. Also supports 1080p at 120FPS, 60FPS, and 30FPS.
• Optimized Low Light Performance: Designed to perform effectively in challenging lighting conditions.
• Трывалая канструкцыя: Made of heat-resistant anodized aluminum with a heat-resistant glass lens, suitable for interior firefighting environments.
• Interchangeable End Caps: Includes a water-resistant cap for audio recording and a fully waterproof cap for submerged use (up to 30 feet).
• Рэжым фота: In addition to video, the camera can capture still images.
• Налады, якія можна наладзіць: Options for Time/Date Stamp, Time Lapse, Auto Power Off, Audio recording (with appropriate cap), and Auto Power On Record.

Настройка

1. Зарадка акумулятара

1. Insert one of the provided 3.7V Li-Po batteries into the camera.
2. Connect the camera to the AC wall charger using the USB cable.
3. The camera will indicate charging status (e.g., an LED indicator). Ensure the camera is powered off during charging to avoid unintended recording. A full charge typically takes a few hours.

2. Устаўка карты Micro SD

1. Locate the Micro SD card slot on the camera body.
2. Gently insert the provided 32GB U3 Micro SD card into the slot until it clicks into place. Ensure the card is oriented correctly.

3. Attaching the Mount to a Helmet

Figure 2: The Fire Cam Onyx 4K camera securely attached to the brim of a white fire helmet using the BlackJack mount. This demonstrates the typical mounting position for operational use.

1. The BlackJack Fire Cam Mount is designed for US style fire helmets or any brim-style helmet.
2. Securely attach the mount to the helmet brim using the provided hardware. Ensure it is tightened sufficiently to prevent movement during activity.
3. Slide the Fire Cam Onyx 4K camera into the mount until it is firmly seated.

Figure 3: The Fire Cam Onyx 4K camera mounted on a black fire helmet, showcasing its integration with standard firefighting equipment. The camera is positioned to capture forward-facing video.

4. Selecting the Correct End Cap

• Выкарыстоўвайце Water Resistant Cap for operations where audio recording is desired. This cap allows sound to be captured from the surroundings, including radio traffic.
• Выкарыстоўвайце Воданепранікальная шапачка when operating in submerged conditions or where maximum water protection is required. This cap does not allow audio recording.
• Ensure the O-rings are properly seated when changing caps to maintain water resistance/waterproofing.

Інструкцыя па эксплуатацыі

Уключэнне/выключэнне

• Каб уключыць: Націсніце і ўтрымлівайце кнопку харчавання, пакуль не загарыцца індыкатар.
• Каб выключыць: Націсніце і ўтрымлівайце кнопку харчавання, пакуль не пагасне індыкатар.

Запіс відэа

1. Пераканайцеся, што камера ўключана.
2. Press the record button once to start video recording. The indicator light will change to confirm recording is active.
3. Press the record button again to stop recording. The indicator light will revert to standby mode.

Фатаграфаванне

The Fire Cam Onyx 4K supports a dedicated photo mode.

1. With the camera in standby mode, press the mode button (if available, or refer to specific button functions in your quick start guide) to switch to photo mode.
2. Press the record/shutter button once to capture a still image.

Advanced Settings (Time/Date Stamp, Time Lapse, Auto Power Off, Audio, Auto Power On Record)

These settings are typically configured via a configuration file on the Micro SD card or through a dedicated software utility. Refer to the official Fire Cam website for detailed instructions on accessing and modifying these advanced settings.

• Час/Дата вул.amp: Enables or disables the overlay of time and date on recorded video.
• Прамежак часу: Configures the camera to capture images at set intervals.
• Аўтаматычнае выключэнне: Sets a duration after which the camera will automatically power off if inactive.
• Аўдыё: Controls audio recording functionality (requires the water-resistant cap).
• Auto Power On Record: If enabled, the camera will automatically begin recording upon power-on.

Тэхнічнае абслугоўванне

Уборка

• Працярыце корпус камеры рэкламайamp тканіна. Пазбягайце рэзкіх хімікатаў.
• Clean the glass lens carefully with a soft, lint-free cloth, possibly moistened with lens cleaning solution, to avoid scratches and ensure clear video quality.

Сыход за батарэяй

• Калі батарэі не выкарыстоўваюцца, захоўвайце яе ў прахалодным сухім месцы.
• Пазбягайце частай поўнай разрадкі акумулятараў, каб падоўжыць тэрмін іх службы.
• If not using the camera for an extended period, charge batteries to about 50% before storage.

Кіраванне SD-картай

• Regularly transfer recorded footage to a computer or external storage device.
• Format the Micro SD card periodically (e.g., monthly or after significant use) to maintain optimal performance and prevent data corruption. Always back up data before formatting.

O-Ring and Lens Inspection

• Before each use, especially when using the waterproof cap, inspect the O-rings for any signs of wear, cracks, or debris. Replace if necessary using the provided spare O-rings.
• Check the glass lens for scratches or damage. Replace with a spare lens if visibility is compromised.

Ліквідацыю непаладак

Тэхнічныя характарыстыкі

Гарантыя і падтрымка

For specific warranty information, please refer to the documentation included with your purchase or visit the official Fire Cam website. Fire Cam offers support for their products, including replacement parts for individual camera components.

For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please contact Fire Cam customer support directly. You can often find contact information and FAQs on the official Fire Cam webсайт: Visit the Fire Cam Store on Amazon