Інструкцыя па эксплуатацыі лічбавага сейфа AEGIS аб'ёмам 1.7 кубічных футаў

Уводзіны

Thank you for choosing the AEGIS 1.7 Cubic Feet Digital Safe. This manual provides essential information for the proper setup, operation, and maintenance of your new security safe. Please read these instructions carefully before use to ensure optimal performance and security.

This electronic security cabinet is designed to protect your valuable possessions, including important documents, jewelry, handguns, and cards. Its robust construction and advanced locking mechanisms offer peace of mind for home, office, or dorm use.

Асноўныя характарыстыкі

• Large Capacity & Removable Shelf: Exterior Dimensions: 13"D*13.8"W*16.5"H, Interior Dimensions: 10.7"D*13.6"W*16.3"H. 1.7 cubic feet capacity with a removable shelf for flexible storage.
• Strong & Secure Construction: Made of reinforced solid steel with two 18mm diameter active locking bolts, a pry-resistant steel door, and heavy-duty pry-resistant hinges.
• Двайны блок харчавання: Operates with 4 x 1.5V AA Alkaline batteries (not included) or via the included USB-C cable for alternative power.
• Wall and Floor Mountable: Features pre-drilled holes on the bottom and back for secure installation.
• Лічбавая клавіятура: Easy-to-use electronic keypad for quick setup and operation, protecting valuables with a carpeted floor mat.

Настройка

1. Распакаванне і першапачатковы агляд

Carefully remove the safe from its packaging. Inspect the safe for any signs of damage. Ensure all components, including the emergency keys and instruction manual, are present.

2. Устаноўка батарэі

Locate the battery compartment inside the safe door. Insert 4 new 1.5V AA Alkaline batteries, ensuring correct polarity. Close the battery cover securely.

Image: Interior of the safe showing the battery compartment.

Alternatively, the safe can be powered using a USB-C cable (not included) connected to the external power port on the keypad, especially useful if batteries are depleted or forgotten.

3. Усталяванне вашага асабістага кода

With the safe door open, press the red reset button located on the inside of the door, near the hinge. The keypad will beep, and the green light will illuminate. Enter your desired 3 to 8 digit code, then press the '#' or 'E' button to confirm. Test your new code with the door open to ensure it works correctly before closing the safe.

Image: Digital keypad for setting and entering codes.

Інструкцыя па эксплуатацыі

1. Opening the Safe with Digital Code

Enter your personal 3 to 8 digit code on the digital keypad. If the code is correct, the green light will illuminate. Turn the knob clockwise to open the safe door.

2. Opening the Safe with Emergency Key

In case of forgotten password or dead batteries, the safe can be opened using the emergency key. Remove the cover plate on the keypad to reveal the keyhole. Insert the emergency key and turn it counter-clockwise while simultaneously turning the knob clockwise to open the safe.

Image: Close-up showing the emergency keyhole and internal locking mechanism.

3. Скід пароля

To reset the password, open the safe door. Press the red reset button inside the door. Enter your new 3-8 digit code and confirm with '#' or 'E'.

4. Папярэджанне пра разрад батарэі

When the batteries are low, the yellow light on the keypad will illuminate, indicating that the batteries need to be replaced soon. Replace all 4 AA batteries promptly to ensure continuous operation.

Video: Demonstration of the AEGIS Digital Security Safe Box for Home, showing key features and operation.

Інструкцыя па мантажы

The AEGIS safe features two pre-drilled holes on both the bottom and back for secure mounting to a wall or floor. This enhances security by preventing unauthorized removal of the safe.

Steps for Mounting:

1. Choose a suitable location for mounting, ensuring it is a solid surface (e.g., concrete wall, wooden stud, or sturdy floor).
2. Адзначце кропкі свідравання праз загадзя прасвідраваныя адтуліны ўнутры сейфа.
3. Drill pilot holes into the wall or floor using an appropriate drill bit size for your mounting hardware (not included).
4. Align the safe with the drilled holes and secure it using suitable bolts or screws. Ensure the safe is firmly attached and does not wobble.

Image: The AEGIS safe showing the embedded knob handle and illustrating its placement in a home environment.

Тэхнічнае абслугоўванне

• Уборка: Працярыце знешнія паверхні сейфа мяккай губкайamp тканінай. Пазбягайце абразіўных ачышчальнікаў або растваральнікаў, якія могуць пашкодзіць пакрыццё.
• Замена батарэі: Replace batteries annually or when the low battery indicator illuminates to ensure reliable operation.
• Захоўванне ключоў: Store emergency keys in a secure location away from the safe and out of reach of unauthorized individuals.

Ліквідацыю непаладак

Тэхнічныя характарыстыкі

Гарантыя і падтрымка

AEGIS products are manufactured to high-quality standards. For any questions, technical support, or warranty claims, please contact AEGIS customer service. Keep your purchase receipt as proof of purchase for warranty purposes.

For further assistance, please visit the official AEGIS store: AEGIS Store on Amazon.