Lepro 100082-DW-US-2

Lepro Dusk to Dawn Light Bulbs User Manual

Model: 100082-DW-US-2

1. Уводзіны

Thank you for choosing Lepro Dusk to Dawn Light Bulbs. These LED bulbs are designed for convenience and energy efficiency, featuring integrated photocell sensors that automatically control illumination based on ambient light levels. This manual provides essential information for the safe and effective use of your new bulbs.

2. Асаблівасці прадукту

  • Аўтаматычнае ўключэнне/выключэнне: Equipped with two photocell light sensors, these bulbs automatically turn on at dusk (brightness < 15 lux) and turn off at dawn (brightness > 65 lux).
  • Доўгі тэрмін службы: Each LED bulb provides an estimated lifespan of 15,000 hours, reducing the frequency and cost of replacements.
  • энергазберажэнне: Replaces traditional 60-watt incandescent bulbs with only 9 watts of LED power, offering significant energy savings.
  • Яркае асвятленне: Delivers 806 lumens of bright, Daylight White light (5000 Kelvin).
  • Лёгкая ўстаноўка: Designed with a standard E26 medium screw base, compatible with most outdoor light fixtures.
  • Не зацямняецца: These bulbs are not compatible with dimmer switches.
Two Lepro A19 E26 LED bulbs with integrated light sensors.

Image: Two Lepro A19 E26 LED bulbs with integrated light sensors.

A single Lepro dusk-to-dawn LED bulb illustrating its automatic function: staying on when brightness is below 15 lux (nighttime) and staying off when brightness is above 65 lux (daytime).

Image: Illustration of the bulb's automatic dusk-to-dawn functionality based on ambient light levels.

3. Настройка і ўстаноўка

These bulbs are designed for simple installation into compatible fixtures. Follow these steps:

  1. Выключэнне: Перад устаноўкай пераканайцеся, што сілкаванне свяцільні адключана аўтаматычным выключальнікам, каб пазбегнуць паражэння электрычным токам.
  2. Выдаліць старую лямпачку: Акуратна адкруціце і выміце існуючую лямпачку з свяцільні.
  3. Усталяваць новую лямпачку: Screw the Lepro Dusk to Dawn LED bulb into the E26 medium screw base socket until it is snug. Do not overtighten.
  4. Аднавіць сілу: Зноў уключыце сілкаванне на аўтаматычным выключальніку.
  5. Размяшчэнне датчыка: For optimal performance, ensure the bulb's light sensor is not obstructed by the fixture housing or other objects. The sensor needs direct exposure to ambient light to function correctly. Avoid installing in fixtures that are fully enclosed or have opaque covers that block light from reaching the sensor.
An outdoor porch with two light fixtures, each containing a Lepro dusk-to-dawn bulb, demonstrating automatic illumination at night and automatic shut-off at dawn without a timer.

Малюнак: Example of automatic outdoor lighting on a porch, no timer needed.

4. Аперацыя

The Lepro Dusk to Dawn Light Bulbs operate automatically using integrated photocell sensors. Once installed and powered, the bulbs will:

  • Уключыць: When the ambient light level drops below approximately 15 lux (typically at dusk), the bulbs will automatically illuminate.
  • Выключыць: When the ambient light level rises above approximately 65 lux (typically at dawn), the bulbs will automatically switch off.

No manual intervention or external timers are required for their basic operation. Ensure the sensor is not exposed to direct artificial light sources at night, as this may cause the bulb to turn off prematurely.

A collage of four images showing various outdoor applications for the bulbs: garage lights, barn lights, street lamps, and porch lights.

Image: Various outdoor applications for Lepro Dusk to Dawn bulbs.

5. Тэхнічнае абслугоўванне

These LED bulbs require minimal maintenance. Follow these guidelines:

  • Уборка: Ensure the power is off before cleaning. Gently wipe the bulb with a soft, dry cloth to remove dust or debris. Do not use liquid cleaners or abrasive materials.
  • Замена: Due to their long lifespan, frequent replacement is not expected. When replacement is necessary, follow the installation steps outlined in Section 3.
  • Няма частак, якія абслугоўваюцца карыстальнікам: Do not attempt to disassemble or repair the bulb. Doing so will void any warranty and may pose a safety risk.

6. Выпраўленне непаладак

If you encounter issues with your Lepro Dusk to Dawn Light Bulbs, refer to the table below for common problems and solutions:

праблемаМагчымая прычынаРашэнне
Bulb does not turn on at dusk.1. Харчаванне адключана.
2. Датчык заблакаваны або атрымлівае занадта шмат святла.
3. Bulb is faulty.		1. Check circuit breaker and light switch.
2. Ensure sensor is clear and not exposed to other light sources (e.g., streetlights, other fixtures).
3. Заменіце лямпачку.
Bulb does not turn off at dawn.1. Датчык заблакаваны або не атрымлівае дастаткова святла.
2. Bulb is faulty.		1. Ensure sensor is clear and exposed to sufficient daylight.
2. Заменіце лямпачку.
Лямпачка мігціць або цыклічна ўключаецца/выключаецца.1. Sensor interference from other light sources.
2. Нестабільнае электразабеспячэнне.
3. Bulb is faulty.		1. Relocate the bulb or adjust fixture to minimize interference.
2. Consult an electrician if power supply is suspected.
3. Заменіце лямпачку.
Bulb is not as bright as expected.1. Няправільны тып лямпачкі.
2. Power issue.		1. Verify the bulb is the correct wattagі светлавы паток.
2. Забяспечце стабільнае электразабеспячэнне.

7. Тэхнічныя характарыстыкі

СпецыфікацыяДэталь
МаркаПраказа
Нумар мадэлі100082-DW-US-2
Светлы тыпсвятлодыёд
АсаблівасцьAuto On/Off, Energy Efficient, Light Sensor
Ватtage9 ват
Эквівалент лямпы напальвання60 ват
Форма цыбуліны ПамерA19
Падстава лямпачкіЦокаль E26 сярэдняга памеру з шрубай
Яркасць806 люмен
Светлы колерДзённае белае
Каляровая тэмпература5000 кельвінаў
тtage120 Volts (100-120V, 60Hz)
Сярэдняя жыццё15,000 гадзін
Выкарыстанне ў памяшканні/на вуліцыНа адкрытым паветры (Damp-proof) & Indoor
МатэрыялАлюміній, пластык
Памеры прадукту2.36" W x 4.37" H (60mm Diameter x 111mm Height)
СертыфікатыFCC, УЛ
A diagram illustrating the dimensions of the 9W A19 E26 LED bulb (2.36 inches / 60mm diameter, 4.37 inches / 111mm height) and its energy efficiency, stating that 9W LED is equivalent to 60W incandescent.

Image: Bulb dimensions and energy equivalency (9W LED = 60W Incandescent).

8. Інфармацыя па бяспецы

Please read and follow all safety instructions to prevent injury or property damage:

  • Рызыка паразы электрычным токам: Always turn off the power at the circuit breaker before installing, removing, or cleaning the bulb.
  • Выкарыстанне ў памяшканні/на вуліцы: Падыходзіць для damp месцах. Не падвяргайце ўздзеянню прамых пырскаў вады або апускання.
  • Не зацямняецца: Do not use with dimmer switches. Use with dimmer switches may damage the bulb or the dimmer.
  • Працоўная тэмпература: Do not use in enclosed fixtures that restrict airflow, as this may shorten the bulb's lifespan.
  • Утылізацыя: Утылізуйце лямпачкі ў адпаведнасці з мясцовымі правіламі.
  • Not for Emergency Lighting: These bulbs are not intended for use in emergency exit fixtures or emergency lights.