Lepro PR410088-WW-US

Lepro 32.8ft Dimmable Warm White LED Strip Light

Кіраўніцтва па эксплуатацыі

Прадукт скончаныview

This manual provides instructions for the Lepro 32.8ft Dimmable Warm White LED Strip Light. This product is designed to provide versatile and adjustable lighting for various indoor applications, including kitchens, bedrooms, and living areas. It features a warm white light at 3000K and includes a dimmer for brightness control.

Lepro 32.8ft Dimmable Warm White LED Strip Light kit

Image: The complete Lepro LED Strip Light kit, including the 32.8ft LED strip on a reel, a dimmer switch, and a power adapter.

Што ўключана

The standard kit for your Lepro LED Strip Light includes the following components:

  • 1 x 32.8ft (10m) Non-Waterproof LED Light Strip
  • 1 x Dimmer Switch
  • 1 x Power Adapter (US plug)

Настройка і ўстаноўка

Каб правільна ўсталяваць святлодыёдную стужку, выканайце наступныя дзеянні:

  1. Падрыхтуйце паверхню: Ensure the installation surface is clean, dry, and smooth. Dust, oil, or moisture can affect the adhesive's performance.
  2. Вымераць і адрэзаць (неабавязкова): If a shorter length is required, the LED strip can be cut along the designated cut marks (usually indicated by a copper pad and a scissor icon). Do not cut in other areas.
  3. Нанесці палоску: Peel off the protective backing from the 3M adhesive tape on the back of the LED strip. Carefully press the strip onto the desired surface, applying firm and even pressure along its entire length to ensure strong adhesion.
  4. Замацаваць заціскамі (неабавязкова): For added security, especially on textured surfaces or corners, use fixing clips (if provided or purchased separately) to reinforce the strip's placement.
  5. Падключэнне кампанентаў: Connect the LED strip to the dimmer switch, and then connect the dimmer switch to the power adapter. Ensure all connections are secure.
  6. Падключыць: Падключыце адаптар сілкавання да стандартнай электрычнай разеткі.
Easy installation steps for Lepro LED strip light

Image: A visual guide demonstrating the installation process: wiping the surface, peeling the adhesive, and using fixing clips.

Інструкцыя па эксплуатацыі

The Lepro LED Strip Light is designed for simple operation:

  • Уключэнне/выключэнне харчавання: Use the switch on the dimmer control to turn the lights on or off.
  • Наладзіць яркасць: Rotate the knob on the dimmer switch to adjust the light intensity from 10% to 100%.
Dimmable functionality of Lepro LED strip light

Image: A close-up of the LED strip and dimmer, illustrating the adjustable brightness levels from 10% to 100%.

Тэхнічнае абслугоўванне

To ensure the longevity and optimal performance of your LED strip light:

  • Уборка: Gently wipe the LED strip with a soft, dry cloth. Avoid using abrasive cleaners or harsh chemicals, as these can damage the strip or its components.
  • Асяроддзе: This product is designed for indoor use only. Avoid exposure to water, high humidity, or extreme temperatures.
  • Сувязі: Перыядычна правярайце ўсе злучэнні, каб пераканацца, што яны застаюцца ў бяспецы.

Ліквідацыю непаладак

If you encounter issues with your Lepro LED Strip Light, refer to the following common problems and solutions:

  • Святло не ўключаецца:
    • Check if the power adapter is securely plugged into a working electrical outlet.
    • Ensure all connections between the strip, dimmer, and power adapter are firm.
    • Verify the dimmer switch is in the 'On' position and not set to minimum brightness.
  • Мігценне або цьмянае святло:
    • Праверце аслабленыя злучэнні.
    • Ensure the power adapter is providing sufficient power.
    • Adjust the dimmer to a higher brightness setting.
  • Клей не трымаецца:
    • Ensure the installation surface was thoroughly cleaned and dried before application.
    • Apply additional fixing clips for better adhesion, especially on uneven or porous surfaces.
  • Section of Strip Not Lighting Up:
    • This may indicate a break in the circuit. Inspect the strip for any visible damage or sharp bends, particularly if it was cut or bent excessively during installation.

Тэхнічныя характарыстыкі

АсаблівасцьДэталь
Нумар мадэліPR410088-WW-ЗША
Даўжыня32.8 футаў (10 метраў)
Светлы колерЦёплы белы
Каляровая тэмпература3000 кельвінаў
Тып крыніцы святлаСвятлодыёд (SMD 2835)
Колькасць святлодыёдаў420 (as per product description, 600 in some specs)
Светлавы струмень1800 люмен
тtage24 Вольты пастаяннага току
Ватtage18 ват
АсаблівасцьЗацямняецца
Выкарыстанне ў памяшканні/на вуліцыУ памяшканні
Тып клею3M стужка
UL Listed Power Adapter for Lepro LED Strip Light

Image: A hand holding the illuminated LED strip, next to the UL Listed power adapter, highlighting product safety.

Гарантыя і падтрымка

For warranty information or customer support, please refer to the documentation included with your product or visit the official Lepro webсайт. Канкрэтныя гарантыйныя ўмовы могуць адрознівацца.

© 2023 Лепро. Усе правы абаронены.