Lepro 410084-RGB-US-NF-a

Lepro 32.8ft RGB LED Strip Lights User Manual

Model: 410084-RGB-US-NF-a

1. Уводзіны

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Lepro 32.8ft RGB LED Strip Lights. This kit includes two 16.4ft flexible LED strips, a 44-key IR remote control, and a 12V power supply. The LED strips offer a wide range of colors and dynamic modes, suitable for various indoor lighting applications.

Lepro 32.8ft RGB LED Strip Lights kit showing two rolls of LED strips, a remote control, and a power adapter.

Figure 1: Complete Lepro LED Strip Lights Kit

2. Змесціва ўпакоўкі

Праверце наяўнасць усіх кампанентаў у камплекце:

2 x 16.4ft (5m) RGB LED Strip Lights
1 x 44-Key IR Remote Control
1 х 12В адаптар сілкавання
1 x Control Box (IR Receiver)

3. Ўстаноўка і налада

Выканайце наступныя дзеянні для правільнай ўстаноўкі:

Падрыхтуйце паверхню: Ensure the installation surface is clean, dry, and smooth. Dust, oil, or moisture can affect the adhesive's performance.
Вымераць і адрэзаць (неабавязкова): If a shorter length is required, the LED strip can be cut along the designated cut marks (usually every 3 LEDs). Use sharp scissors to ensure a clean cut. Do not cut at any other point.
Attach the Strip: Carefully peel off the backing from the 3M adhesive tape on the back of the LED strip. Press the strip firmly onto the desired surface.
Падключэнне кампанентаў:
- Connect the LED strip(s) to the control box. Ensure the arrows on the connectors align.
- Connect the 12V power adapter to the control box.
- Падключыце адаптар сілкавання да стандартнай электрычнай разеткі.
Актываваць пульт: Before using the remote control, remove the transparent plastic insulation sheet from the battery compartment.

Diagram showing the connection of LED strip lights to the control box and power adapter, with an arrow indicating to pull out the plastic chip from the remote.

Figure 2: Connection Diagram for LED Strip Lights

For a visual guide on installation and various applications, please refer to the official product video below:

Video 1: Official Lepro LED Strip Lights Overview and Application Examples. This video demonstrates the product's features and shows various installation scenarios in different rooms.

4. Інструкцыя па эксплуатацыі

The 44-key IR remote control allows you to manage the LED strip lights. Point the remote directly at the IR receiver on the control box for optimal response.

44-key IR remote control for LED strip lights, showing buttons for colors, brightness, and dynamic modes.

Figure 3: 44-Key IR Remote Control Layout

Функцыі дыстанцыйнага кіравання:

Укл/Выкл: Power button to turn the lights on or off.
Рэгуляванне яркасці: Up/Down arrows to increase or decrease brightness.
Выбар колеру: 20 preset static colors, including Red, Green, Blue, and White.
Колеры «зрабі сам»: 6 programmable buttons (DIY1-DIY6) to save custom colors. Press a DIY button, then use the R/G/B up/down arrows to adjust the color, and press the DIY button again to save.
Дынамічныя рэжымы: 8 pre-programmed lighting modes (e.g., JUMP3, JUMP7, FADE3, FADE7, AUTO, FLASH, QUICK, SLOW) for various effects.

5. Тэхнічнае абслугоўванне

To ensure the longevity and optimal performance of your LED strip lights, follow these maintenance guidelines:

Уборка: Акуратна працярыце святлодыёдныя стужкі сухой мяккай тканінай, каб выдаліць пыл. Пазбягайце выкарыстання вадкіх ачышчальнікаў або абразіўных матэрыялаў.
Асяроддзе: These lights are designed for indoor use. Avoid exposure to water, high humidity, or extreme temperatures.
Сыход за клеем: The 3M adhesive is strong. If repositioning is necessary, do so carefully to avoid damaging the strip or the surface. Ensure the surface is clean before initial application to maximize adhesion.

6. Выпраўленне непаладак

If you encounter issues with your LED strip lights, consult the following table for common problems and solutions:

праблема	Магчымая прычына	Рашэнне
Святло не гарыць.	Адаптар сілкавання не падключаны. Remote battery depleted or plastic tab not removed. Incorrect connection between strip and control box.	Ensure power adapter is securely plugged into outlet and control box. Remove plastic tab from remote battery. Replace battery if necessary. Verify arrow alignment on all connectors.
Не працуе пульт дыстанцыйнага кіравання.	Remote not pointed at IR receiver. Перашкода паміж пультам і прымачом. Remote battery issue.	Point remote directly at the small black IR receiver on the control box. Выдаліце ўсе перашкоды. Check/replace remote battery.
Some LEDs show incorrect color or are off.	Damage to a section of the LED strip. Няспраўнае злучэнне.	Inspect the strip for physical damage. If a section is damaged, it may require replacement. Пераканайцеся, што ўсе злучэнні надзейныя.
LED strip falls off surface.	Surface not clean or smooth. Insufficient pressure during installation.	Clean the surface thoroughly before re-applying. Apply firm, even pressure along the entire strip during installation. Consider using additional adhesive clips for heavy-duty applications.

7. Тэхнічныя характарыстыкі прадукту

Асаблівасць	Дэталь
Марка	Праказа
Нумар мадэлі	410084-RGB-US-NF-a
Колер	RGB (чырвоны, зялёны, сіні)
Выкарыстанне ў памяшканні/на вуліцы	У памяшканні
Асаблівасць	Зацямняецца
Тып крыніцы святла	святлодыёд
Крыніца харчавання	Правадная электрычная
Матэрыял	Медзь, пластык
Тып кантролера	Пульт дыстанцыйнага кіравання
Колькасць крыніц святла	300 (total for 32.8ft)
тtage	12 вольт
Ватtage	36 ват
Вага прадмета	0.33 кілаграма (11.6 унцыі)
Даўжыня прадмета	32.8 Feet (2 x 16.4ft)

8. Інфармацыя аб гарантыі

Гэты прадукт распаўсюджваецца на a Гарантыя 2 год from the date of purchase. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.

9. Падтрымка кліентаў

For technical assistance, warranty claims, or any questions regarding your Lepro LED Strip Lights, please contact Lepro customer support through their official website or the retailer where the product was purchased. Please have your model number (410084-RGB-US-NF-a) and proof of purchase available when contacting support.