Bellman & Symfon Smoke Alarm Transmitter

1. Уводзіны

This manual provides essential information for the proper installation, operation, and maintenance of your Bellman & Symfon Smoke Alarm Transmitter (Model BE1284-433). This device is designed to integrate with the Bellman Visit Smart Home System, providing early fire detection and transmitting alerts to compatible Visit receivers, particularly beneficial for individuals who are deaf or hard of hearing.

Калі ласка, уважліва прачытайце гэтую інструкцыю перад выкарыстаннем прадукту, каб забяспечыць бяспечную і эфектыўную працу.

2. Інфармацыя па бяспецы

• Важна: This smoke alarm transmitter is a component of the Bellman Visit Smart Home System and requires a compatible Bellman Visit receiver (sold separately) to provide alerts. It does not function as a standalone audible smoke alarm.
• Do not paint the smoke alarm. Paint can clog the openings and interfere with the sensor's ability to detect smoke.
• Не ўсталёўвайце прыладу ў месцах з высокай вільготнасцю, экстрэмальнымі тэмпературамі або празмернай запыленасцю.
• Test the smoke alarm regularly as described in the "Operation" section.
• Replace batteries promptly when indicated.
• Захоўваць у месцах, недаступных для дзяцей, калі толькі яны не знаходзяцца пад наглядам дзяцей.

3. Змесціва ўпакоўкі

Праверце наяўнасць усіх прадметаў у камплекце:

• Bellman & Symfon Smoke Alarm Transmitter (BE1284-433)
• Мантажны кранштэйн
• Шрубы і дюбелі
• Кіраўніцтва карыстальніка (гэты дакумент)
• Battery (pre-installed or separate, check packaging)

Image: The Bellman & Symfon Smoke Alarm Transmitter shown with its retail packaging.

4. Прадукт скончыўсяview

4.1 Кампаненты

The Bellman & Symfon Smoke Alarm Transmitter consists of the following main parts:

• Датчык дыму: Detects smoke particles.
• Test & Silence Button: Used for testing the alarm and temporarily silencing nuisance alarms.
• Святлодыёдныя індыкатары: Provide visual feedback on status (e.g., power, alarm, fault).
• Батарэйны адсек: Houses the power source.
• Мантажная пласціна: For secure installation on a ceiling or wall.

Image: The smoke alarm transmitter installed on a ceiling, showing its compact design.

4.2 Асаблівасці

• Wireless transmission to Bellman Visit receivers.
• Long battery life (up to 10 years).
• Integrated Test & Silence button.
• "Toast Mode" for temporary sensitivity reduction in cooking areas.
• Designed for individuals who are deaf or hard of hearing, seniors, and assisted living environments.

5. Настройка

5.1 Выбар месца

Install the smoke alarm transmitter on the ceiling in the center of a room or hallway. If ceiling mounting is not possible, it can be mounted on a wall, ensuring the top edge is between 4 to 12 inches (10 to 30 cm) from the ceiling.

Avoid installing in:

• Kitchens or bathrooms (due to steam and cooking fumes).
• Near ventilation openings, windows, or doors.
• Areas with extreme temperatures (below 4°C / 39°F or above 38°C / 100°F).

5.2 Ўстаноўка

1. Падрыхтуйце мантажную пласціну: Detach the mounting plate from the smoke alarm by twisting it counter-clockwise.
2. Пазначце адтуліны для свідравання: Hold the mounting plate against the chosen ceiling or wall location and mark the positions for the drill holes.
3. Свідраванне і мантаж: Drill holes, insert wall plugs (if necessary), and secure the mounting plate with the provided screws.
4. Attach the Transmitter: Align the smoke alarm transmitter with the mounting plate and twist it clockwise until it clicks securely into place.

Image: Dimensions of the smoke alarm transmitter: Height 4.7" (120 mm), Width 4.7" (120 mm), Depth 1.8" (46 mm), Weight 0.41 lb (185 g) including battery.

5.3 Pairing with a Visit Receiver

To receive alerts, the smoke alarm transmitter must be paired with a Bellman Visit receiver (e.g., Flash Receiver, Alarm Clock Receiver, Pager Receiver, Portable Receiver). Refer to your Visit receiver's manual for specific pairing instructions. Generally, the process involves:

1. Put your Visit receiver into pairing mode.
2. Press and hold the Test & Silence button on the smoke alarm transmitter until the LED indicator flashes, indicating it's sending a pairing signal.
3. Confirm successful pairing on your Visit receiver.

Image: An illustration showing various Bellman Visit transmitters (including the smoke alarm) and receivers placed throughout a home, demonstrating system integration.

6. Аперацыя

6.1 Initial Test

After installation and pairing, perform an initial test:

• Націсніце і ўтрымлівайце Test & Silence кнопку на некалькі секунд.
• The smoke alarm will emit a test signal, and your paired Visit receiver should activate (e.g., flash lights, vibrate).
• If the receiver does not respond, re-check pairing and ensure the transmitter is within range.

6.2 Нармальная праца

The smoke alarm transmitter continuously monitors for smoke. Upon detection, it will:

• Activate its internal alarm (if equipped, though primarily designed for transmission).
• Transmit an alarm signal to all paired Bellman Visit receivers within range.

Image: The smoke alarm transmitter detecting smoke, indicated by a red LED and smoke visually rising.

6.3 Silence Function (Toast Mode)

The "Toast Mode" allows for temporary reduction of sensitivity to prevent nuisance alarms from cooking fumes. To activate:

• When a nuisance alarm occurs (e.g., from cooking), press the Test & Silence кнопка.
• The alarm will be silenced for approximately 10 minutes, and the sensitivity will be reduced.
• After 10 minutes, the alarm will automatically return to normal sensitivity.

Image: A kitchen setting with the smoke alarm installed, illustrating the use of "Toast Mode" to reduce sensitivity during cooking.

7. Тэхнічнае абслугоўванне

7.1 Рэгулярнае тэсціраванне

Test the smoke alarm transmitter weekly by pressing the Test & Silence button. Ensure your paired Visit receiver responds correctly.

7.2 Ачыстка

Clean the exterior of the smoke alarm transmitter at least once a month using a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Do not open the unit for cleaning.

7.3 Замена батарэі

The smoke alarm transmitter is designed for long battery life (up to 10 years). When the battery is low, the unit will typically indicate this with a specific LED flash pattern or a signal to the Visit receiver. Replace the battery immediately when indicated. Refer to the product's internal markings for the correct battery type (usually a non-rechargeable lithium battery).

1. Twist the smoke alarm counter-clockwise to remove it from its mounting plate.
2. Адкрыйце батарэйны адсек.
3. Зніміце старую батарэю і ўтылізуйце яе ў адпаведнасці з мясцовымі правіламі.
4. Insert the new battery, ensuring correct polarity.
5. Close the battery compartment and reattach the smoke alarm to its mounting plate.
6. Perform a test as described in Section 6.1.

8. Выпраўленне непаладак

9. Тэхнічныя характарыстыкі

10. Гарантыя і падтрымка

10.1 30-Day Money Back Guarantee

Bellman & Symfon offers a risk-free refund for all products within 30 days of purchase. If you are not satisfied with your product, please contact customer support for assistance.

10.2 Падтрымка кліентаў

For any questions, technical assistance, or support regarding your Bellman & Symfon product, please contact us:

• Бясплатны званок: (833) BELLMAN / (833) 235 5626
• электронная пошта: support.bsn@bellman.com