LiNKFOR UHF Wireless Microphone System User Manual

Уводзіны

Thank you for choosing the LiNKFOR UHF Wireless Microphone System. This system is designed to provide clear, high-fidelity audio for various applications, including outdoor events, weddings, conferences, karaoke, and parties. With stable UHF signal transmission and high-sensitivity sound capture, it ensures an excellent audio experience. Please read this manual thoroughly before use to ensure proper operation and to maximize the product's lifespan.

Інфармацыя па бяспецы

• This package contains only the wireless microphone system. An additional audio device (speaker or amplifier) is required to output sound.
• The output volume depends on the power output of your speakers. We do not recommend using this microphone with speakers less than 15 watts.
• Do not use the microphone too close to the receiver to avoid sound interference.
• Keep the receiver away from metal objects or any digital devices (such as computers, mobile phones, etc.) to avoid potential sources of interference.
• Do not cover the microphone head with your hand, as this may damage it or affect performance.
• For optimal performance and to reduce plosives, we recommend using a foam cover on the microphone.

Змест пакета

Калі ласка, уважліва праверце ўпакоўку, каб пераканацца ў наяўнасці ўсіх прадметаў:

• 1 х бесправадны мікрафон-прыёмнік
• 2 партатыўныя мікрафоны
• 2 х антэны
• 1 x Batteries (AA, quantity 4 needed for microphones)
• 1 х аўдыёкабель (6.35 мм)
• 1 x Certified Power Adapter
• 1 x 3.5mm Male to 6.35mm Female Stereo Adapter
• 1 х Кіраўніцтва карыстальніка

Прадукт скончаныview

Figure 1: Complete LiNKFOR UHF Wireless Microphone System

Малюнак 2: падрабязна view of the receiver and microphones

Ключавыя кампаненты:

• Бесправадной прыёмнік: The central unit that receives signals from the microphones. Features power button, volume controls (Vol-A, Vol-B), and input/output ports.
• Ручныя мікрафоны: Two dynamic, non-directional microphones with ON/OFF switches and LCD displays showing channel/frequency.
• Антэны: Two antennas for stable UHF signal reception.
• Адаптар сілкавання: For powering the receiver.
• Audio Cables/Adapters: For connecting the receiver to an amplifier або актыўны дынамік.

Інструкцыя па наладзе

Follow these steps to set up your LiNKFOR Wireless Microphone System:

1. Уключыце прыёмнік: Plug the receiver's power adapter into a power outlet and then into the receiver. Turn on the receiver.
2. Connect to Audio Output: Use the provided audio cable to connect the receiver's output jack to the input jack of your amplifier або актыўныя калонкі.
   • If your speaker has a 3.5mm jack, use the included 6.35mm to 3.5mm adapter.
3. Connect Background Audio (Optional): To play background music, connect your TV, PC, DVD, VOD, or other audio devices to your amplifier або актыўны дынамік.
4. Connect External Speaker (If applicable): If using a passive speaker, connect it to your amplifier using an audio cable to produce sound. (Skip this step if using active speakers).
5. Insert Microphone Batteries: Insert 2 AA batteries into each handheld microphone. Ensure correct polarity.
6. Уключаныя мікрафоны: Turn on the handheld microphones. They should automatically connect to the receiver.

Figure 3: User enjoying the wireless microphone system.

Інструкцыя па эксплуатацыі

Once setup is complete, you can begin using your microphone system:

• Рэгуляванне гучнасці: Use the volume knobs on the receiver (Vol-A for Microphone A, Vol-B for Microphone B) to adjust the individual microphone volumes.
• Выкарыстанне мікрафона: Hold the microphone approximately 2-6 inches from your mouth for optimal sound pickup.
• Свабода перамяшчэння: The wireless design allows you to move freely within the transmission range (up to 60m, ideally 80m).
• Якасць гуку: The system is equipped with a sound filter and high-sensitivity sound head to effectively filter excessive external noise and capture strong, clear audio.

Figure 4: The system is suitable for various performance settings.

Тэхнічнае абслугоўванне

• Уборка: Для чысткі прымача і мікрафонаў выкарыстоўвайце мяккую сухую тканіну. Не выкарыстоўвайце вадкія ачышчальнікі або абразіўныя матэрыялы.
• захоўванне: When not in use for extended periods, remove batteries from the microphones and store the system in a cool, dry place.
• Тэрмін службы батарэі: The microphones offer a long battery life (typically 2 to 8 hours). Replace batteries when performance degrades.

Ліквідацыю непаладак

How to Avoid Interference:

• Microphone Proximity: Do not use the microphone too close to the receiver to prevent sound interference (feedback).
• Размяшчэнне прымача: Keep the receiver away from metal objects or any digital devices (e.g., computers, mobile phones) to avoid potential interference sources.
• Кіраванне мікрафонам: Do not cover the microphone head with your hand, as this can cause damage or affect sound quality.
• Low Volume/No Sound:
  • Ensure the receiver is powered on and connected correctly to your amplifier / дынамік.
  • Check if the microphones are turned on and have fresh batteries.
  • Verify the volume levels on both the receiver and your amplifier / дынамік.
  • Пацвердзіце, што amplifier/speaker has sufficient power (recommended 15 watts or more).
• Скажоны гук:
  • Reduce the microphone volume on the receiver or the ampзадымнік.
  • Ensure the microphone is not too close to your mouth or the speaker.
  • Check for strong electromagnetic interference from other devices nearby.

Тэхнічныя характарыстыкі

Гарантыя і падтрымка

For warranty information and technical support, please refer to the contact details provided on the LiNKFOR official webсайт або звярніцеся да прадаўца. Захоўвайце чэк аб куплі як пацверджанне пакупкі для любых гарантыйных прэтэнзій.