1. Уводзіны
This manual provides essential information for the proper setup, operation, and maintenance of your Bingfu Handheld Marine VHF Radio Antenna. Please read these instructions carefully before use to ensure optimal performance and longevity of your product. This antenna is designed for use with handheld marine VHF two-way radios operating within the 136-174MHz frequency range.
2. Прадукт скончыўсяview
The Bingfu Handheld Marine VHF Radio Antenna is a durable and flexible "rubber duck" style antenna featuring an SMA Male connector. It is designed for omni-directional signal reception and transmission, enhancing the communication capabilities of compatible marine VHF radios.

Малюнак 2.1: The antenna's flexible design allows for durability and resistance to bending.
Відэа 2.1: Demonstration of the antenna's flexibility and SMA Male connector type.
3. Тэхнічныя характарыстыкі
| Дыяпазон частот | УКХ 136-174 МГц |
| КСВ | < 2.0 |
| Імпеданс | 50 Ом |
| Напрамак | Напрамак |
| Раз'ём антэны | СМА Мужчына |
| Вышыня антэны | 15 см (6 цалі) |
| Вага нета | 60g (per antenna) |
| Працоўная тэмпература | -20°C ~ +80°C |
| Тэмпература захоўвання | -30°C ~ +85°C |
| Сумяшчальныя радыё | Standard Horizon HX210, HX870, HX890, HX300, HX380, HX40, HX280, HX290, HX370; Uniden MHS75 Handheld Floating VHF Radio |

Малюнак 3.1: The antenna measures approximately 15 cm (6 inches) in length.
4. Інструкцыі па ўсталёўцы
Follow these steps to properly attach the antenna to your compatible handheld marine VHF radio:
- Identify Connector Types: Ensure your radio has an SMA Female connector and the antenna has an SMA Male connector.
- Выраўнаваць раздымы: Carefully align the SMA Male connector of the antenna with the SMA Female connector on your radio.
- Антэна, якая накручваецца: Gently screw the antenna onto the radio's connector in a clockwise direction. Do not overtighten, as this can damage both the antenna and the radio's connector. Tighten until snug.
- Check for Secure Fit: Verify that the antenna is securely attached and there is no wobble.
- Optional Gasket: If provided, ensure any rubber gasket or O-ring is properly seated to maintain water resistance, especially for marine radios.

Малюнак 4.1: Proper connection of the SMA Male antenna to an SMA Female radio port.
Відэа 4.1: Visual guide on how to connect an SMA Male antenna to a radio with an SMA Female connector.
5. Інструкцыя па эксплуатацыі
Once the antenna is securely attached, your radio is ready for operation. The antenna is omni-directional, meaning it receives and transmits signals from all directions. For optimal performance, ensure the antenna is positioned vertically and unobstructed.
- Магутнасць радыё: Turn on your handheld marine VHF radio.
- Выбар канала: Select the desired VHF channel according to marine communication regulations.
- Перадача: When transmitting, hold the radio with the antenna as vertical as possible. Avoid touching the antenna during transmission to prevent signal degradation.
- прыёмная: The antenna will receive signals from all directions. For best reception, maintain a clear line of sight if possible.
6. Тэхнічнае абслугоўванне
Proper maintenance ensures the longevity and performance of your antenna:
- Уборка: Clean the antenna periodically with a soft, damp тканіна. Пазбягайце выкарыстання агрэсіўных хімічных рэчываў або абразіўных матэрыялаў.
- агляд: Regularly inspect the antenna for any signs of damage, such as cracks in the rubber or corrosion on the connector.
- Сыход за раздымам: Keep the SMA Male connector clean and dry. If used in marine environments, consider applying a small amount of dielectric grease to the threads to prevent corrosion.
- захоўванне: When not in use for extended periods, store the antenna in a cool, dry place away from direct sunlight and extreme temperatures.
7. Выпраўленне непаладак
If you experience issues with your antenna, consider the following common solutions:
- Poor Signal Reception/Transmission:
- Пераканайцеся, што антэна надзейна прымацавана да радыё.
- Verify the antenna is compatible with your radio's frequency band (VHF 136-174MHz).
- Check for any physical damage to the antenna or its connector.
- Ensure there are no obstructions blocking the antenna's signal path.
- Test the radio with a known working antenna to isolate the issue.
- Antenna Not Fitting Securely:
- Confirm that your radio has an SMA Female connector. This antenna is SMA Male.
- Inspect the threads on both the antenna and the radio for damage or debris.
8. Гарантыя і падтрымка
Каб атрымаць інфармацыю аб гарантыі або тэхнічнай падтрымцы, звярніцеся да афіцыйнага прадстаўніка вытворцы webсайт або звярніцеся непасрэдна ў службу падтрымкі кліентаў. Захоўвайце чэк аб куплі як пацверджанне пакупкі.
Manufacturer: BINGFU
Model: BFN00506