VEVOR Cric Pneumatico ad Aria

VEVOR 5T Pneumatic Air Jack Instruction Manual

мадэль: Cric Pneumatico ad Aria | Брэнд: ВЕВОР

1. Уводзіны

The VEVOR 5T Pneumatic Air Jack is a robust and efficient lifting device designed for various vehicles, including cars, minivans, and SUVs. Constructed from high-strength steel, this air jack offers a maximum lifting capacity of 5 tons (11023 lbs) and can raise a vehicle from 6.3 inches (16 cm) to 15.75 inches (40 cm) in approximately 3-5 seconds. Its triple airbag design ensures stable and secure lifting, making it suitable for use on diverse terrains, including soft ground, sand, or muddy roads.

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your VEVOR Pneumatic Air Jack. Please read it thoroughly before initial use.

VEVOR 5T Pneumatic Air Jack lifting a car

Image 1.1: The VEVOR 5T Pneumatic Air Jack positioned under a vehicle for lifting. It features a triple airbag design and a sturdy base with wheels for maneuverability.

VEVOR Pneumatic Air Jack in action, lifting a car

Image 1.2: The VEVOR Pneumatic Air Jack demonstrating its lifting capability, supporting a vehicle with its inflated airbags. The image highlights its application for automotive maintenance.

2. Інструкцыі па тэхніцы бяспекі

ПАПЯРЭДЖАННЕ: Невыкананне гэтых інструкцый па бяспецы можа прывесці да сур'ёзных траўмаў або пашкоджання маёмасці.

  • Always read and understand the entire manual before operating the air jack.
  • Ensure the jack is placed on a firm, level surface. Avoid uneven or soft ground.
  • Never exceed the rated lifting capacity of 5 tons (11023 lbs).
  • Always use appropriate jack stands to support the vehicle once it is lifted. Never work under a vehicle supported only by the air jack.
  • Keep hands, feet, and other body parts clear of the jack and the vehicle during lifting and lowering operations.
  • Ensure the air supply is clean and dry. Use an air compressor with sufficient capacity and pressure.
  • Do not modify the air jack in any way. Use only original replacement parts.
  • Inspect the jack for damage or wear before each use. Do not use if damaged.
  • Апранайце адпаведныя сродкі індывідуальнай абароны, такія як ахоўныя акуляры і пальчаткі.
  • Трымайце дзяцей і пабочных асоб далей ад рабочай зоны.

3. Кампаненты прадукту

The VEVOR Pneumatic Air Jack consists of several key components designed for durability and ease of use:

  • High-Strength Steel Frame: Provides overall structural integrity and durability.
  • Triple Airbag System: Made from rugged, high-tightness rubber to prevent air leakage and ensure stable lifting.
  • Thickened Rubber Pad: Located at the top contact point, it protects the vehicle's chassis from damage during lifting.
  • Ручка кіравання: Ergonomically designed for easy maneuvering and operation of the air valves.
  • Air Inlet Valve (Green): Controls the inflation of the airbags.
  • Air Release Valve (Red): Controls the deflation of the airbags.
  • Durable Rubber Wheels: Facilitate easy movement and positioning of the jack, suitable for various surfaces.
Падрабязны view of VEVOR Air Jack components

Малюнак 3.1: Крупны план views of the VEVOR Air Jack's construction, highlighting the thickened rubber pad for chassis protection, the rugged triple airbag for durability, and the durable rubber wheels for mobility.

Thickened rubber pad on VEVOR Air Jack

Малюнак 3.2: Падрабязны view of the thickened rubber pad, designed to prevent damage to the vehicle's chassis during lifting operations.

Rugged triple airbag of VEVOR Air Jack

Image 3.3: A close-up of the rugged triple airbag, emphasizing its high sealing performance and wear resistance for reliable and scratch-free operation.

Durable rubber wheel on VEVOR Air Jack

Image 3.4: A detailed image of one of the durable rubber wheels, highlighting its suitability for various terrains, including soft or muddy surfaces.

4. Настройка

Before using the VEVOR Pneumatic Air Jack, ensure proper setup:

  1. Распакуйце кампаненты: Асцярожна выміце ўсе кампаненты з упакоўкі. Пераканайцеся, што ўсе дэталі наяўныя і не пашкоджаныя.
  2. Зборка ручкі: Attach the control handle to the main body of the air jack using the provided fasteners. Ensure it is securely tightened.
  3. Падключэнне паветранага шланга: Connect your air compressor hose to the air inlet valve (green valve) on the jack's control unit. Ensure a tight, leak-free connection.
  4. Падрыхтуйце працоўнае месца: Position the vehicle on a firm, level surface. Engage the parking brake and block the wheels that will not be lifted.
VEVOR Air Jack components for assembly

Image 4.1: The VEVOR Air Jack disassembled into its main components, including the airbag unit, handle, and control valve, illustrating its compact size for storage and ease of assembly.

Compact size of VEVOR Air Jack components

Малюнак 4.2: Над галавой view of the VEVOR Air Jack components laid out, demonstrating its compact design and the parts required for assembly and operation.

5. Інструкцыя па эксплуатацыі

Follow these steps for safe and effective operation of your VEVOR Pneumatic Air Jack:

5.1. Пад'ём транспартнага сродку

  1. Размясціце валет: Roll the air jack under the vehicle, ensuring the thickened rubber pad is centered directly under a strong, load-bearing point of the vehicle's frame or designated jacking point.
  2. Close Red Valve: Ensure the red air release valve is fully closed.
  3. Open Green Valve: Slowly open the green air inlet valve to allow compressed air to enter the airbags. The jack will begin to inflate and lift the vehicle.
  4. Monitor Lifting: Continuously monitor the lifting process, ensuring the vehicle remains stable and the jack is not shifting.
  5. Reach Desired Height: Once the vehicle reaches the desired height, close the green air inlet valve completely.
  6. Замацуйце з дапамогай падстаўак: Immediately place appropriate jack stands under the vehicle's designated support points. Lower the vehicle onto the jack stands by slightly opening the red valve until the vehicle rests securely on the stands.

5.2. Апусканне транспартнага сродку

  1. Злёгку падняць: If the vehicle is on jack stands, use the air jack to lift the vehicle slightly off the jack stands.
  2. Зняць падстаўкі для Джэка: Асцярожна выміце дамкраты з-пад аўтамабіля.
  3. Open Red Valve: Slowly open the red air release valve to gradually deflate the airbags and lower the vehicle. Control the rate of descent by adjusting how much the valve is opened.
  4. Цалкам ніжэй: Continue to lower the vehicle until it is fully on the ground.
  5. Выдаліць Джэка: Once the vehicle is fully lowered and stable, remove the air jack.
VEVOR Air Jack effortless operation steps

Image 5.1: A visual guide to the effortless operation of the VEVOR Air Jack, showing the three steps: 1. Close red valve, open green valve to inflate. 2. Turn off green valve when inflated. 3. Open red valve to bleed air and lower.

VEVOR Air Jack before and after inflation

Image 5.2: A comparison showing the VEVOR Air Jack before inflation (compact) and after inflation (extended), illustrating the rapid lifting capability within 5 seconds.

VEVOR Air Jack lifting height illustration

Image 5.3: An illustration detailing the minimum height (6.3 inches / 16 cm) and maximum height (15.75 inches / 40 cm) of the VEVOR Air Jack, along with arrows indicating the lifting motion.

6. Тэхнічнае абслугоўванне

Regular maintenance ensures the longevity and safe operation of your VEVOR Pneumatic Air Jack:

  • Уборка: After each use, wipe down the jack with a clean, dry cloth to remove dirt, grease, and debris. Avoid using harsh chemicals that could damage rubber components.
  • агляд: Periodically inspect the airbags for cuts, punctures, or signs of wear. Check all connections, hoses, and valves for leaks or damage. Ensure the handle and wheels are securely attached and functioning correctly.
  • Падача паветра: Ensure your air compressor system includes a moisture trap to prevent water from entering the jack, which can cause internal corrosion.
  • захоўванне: Store the air jack in a clean, dry place, away from direct sunlight and extreme temperatures. Ensure it is fully deflated before storage.
  • змазка: Lightly lubricate moving parts, such as wheel axles, if necessary, with a suitable lubricant.

7. Выпраўленне непаладак

Звярніцеся да наступнай табліцы, каб азнаёміцца ​​з распаўсюджанымі праблемамі і іх рашэннямі:

праблемаМагчымая прычынаРашэнне
Jack does not lift or lifts slowlyНедастатковы ціск паветра
Уцечка паветра
Red valve not fully closed
Перагрузка
Check air compressor pressure (ensure it meets specifications)
Inspect hoses and connections for leaks; tighten or replace
Ensure red valve is completely closed
Reduce load; do not exceed 5T capacity
Jack lowers unexpectedlyУцечка паветра
Red valve not fully closed
Damaged airbag
Inspect for leaks; tighten connections
Ensure red valve is completely closed
Do not use; contact VEVOR support for replacement
Difficulty positioning the jackНяроўная паверхня
Пашкоджаныя колы
Move vehicle to a firm, level surface
Inspect wheels for damage; replace if necessary

If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact VEVOR customer support.

8. Тэхнічныя характарыстыкі

Technical specifications for the VEVOR 5T Pneumatic Air Jack:

АсаблівасцьСпецыфікацыя
МаркаВЕВОР
мадэльCric Pneumatico ad Aria
Грузападымальнасць5 тоны (11023 фунтаў)
Мінімальная вышыня6.3 цалі (160 мм)
Максімальная вышыня15.75 цалі (400 мм)
Час ўздымуApproximately 3-5 seconds
МатэрыялHigh-Strength Steel, Rubber Airbags
Працоўная тэмпература-60 ℃ ~ 50 ℃
Памеры прадукту (Д х Ш х У)51.1 х 47 х 21.1 см (прыблізна 20.1 х 18.5 х 8.3 цалі)
Сумяшчальныя тыпы транспартных сродкаўAutomobile, Truck, SUV
VEVOR Air Jack product specifications and dimensions

Image 8.1: A visual representation of the VEVOR Air Jack with key dimensions (height, width, length) and product weight, alongside exampменш сумяшчальных транспартных сродкаў.

9. Гарантыя і падтрымка

VEVOR products are designed for durability and performance. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty details, including duration and coverage, please refer to the warranty card included with your product or visit the official VEVOR webсайт.

For technical assistance, troubleshooting, or to inquire about replacement parts, please contact VEVOR customer support through their official website or the contact information provided in your product packaging. When contacting support, please have your product model number (Cric Pneumatico ad Aria) and ASIN (B08HLRYM7L) ready.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.