BLUEAIR 110055

BLUEAIR Genuine Pre-Filter for Blue Pure 211i Max Air Purifier

Model: 110055 (Moss Green)

Уводзіны

This manual provides instructions for the installation, operation, and maintenance of your BLUEAIR Genuine Pre-Filter, Model 110055, in Moss Green. This pre-filter is specifically designed for use with the Blue Pure 211i Max air purifier. It is not compatible with Blue Pure 211+ or 211+ Auto models.

The pre-filter serves as the first line of defense, capturing larger airborne particles such as dust, lint, pollen, and pet hair. This action helps to extend the lifespan and maintain the efficiency of the primary filter within your air purifier.

Blueair Pure 211i Max air purifier with Moss Green pre-filter in a living room setting.

Image: The Blueair Pure 211i Max air purifier with the Moss Green pre-filter integrated into a home environment.

Настройка і ўстаноўка

Follow these steps to install or replace the pre-filter on your Blue Pure 211i Max air purifier:

  1. Выключэнне: Ensure your Blue Pure 211i Max air purifier is unplugged from the power outlet before proceeding.
  2. Remove Outer Fabric: Gently pull the existing fabric pre-filter upwards and off the air purifier unit.
  3. Prepare New Pre-Filter: Unpack your new BLUEAIR Genuine Pre-Filter (Moss Green).
  4. Усталюйце новы папярэдні фільтр: Carefully slide the new pre-filter down over the main filter housing of the air purifier. Ensure it is evenly positioned and covers the entire filter assembly.
  5. Бяспечная пасадка: Adjust the pre-filter so it sits snugly around the base and top of the air purifier unit.
  6. Уключэнне: Падключыце ачышчальнік паветра назад да разеткі.
Person demonstrating how to remove and install a Blueair pre-filter on an air purifier.

Image: A user installing a fabric pre-filter onto a Blueair air purifier, illustrating the ease of replacement.

Comparison of a Blueair air purifier with and without its pre-filter installed.

Выява: побач view showing the Blue Pure 211i Max air purifier with the pre-filter installed and with the pre-filter removed, revealing the main filter.

Прынцыпы працы

The BLUEAIR Genuine Pre-Filter operates as an integral part of your Blue Pure 211i Max air purifier's filtration system. Once installed, it passively filters the incoming air, trapping larger particles before they reach the main filter. This preliminary filtration helps to maintain the efficiency of the primary filter, ensuring optimal air purification performance over time.

No specific operational adjustments are required for the pre-filter itself; its function is continuous as long as the air purifier is running.

Тэхнічнае абслугоўванне і ўборка

Regular cleaning of your pre-filter is essential to maintain air purifier performance and extend the life of the main filter. The BLUEAIR Genuine Pre-Filter is designed for repeated washing and reuse.

Routine Cleaning (Vacuuming)

For light dust and visible dirt, you can vacuum the exterior of the fabric pre-filter as often as needed. This can be done while the pre-filter is still on the air purifier or after removal.

Deep Cleaning (Washing Machine)

When a deeper clean is required, follow these steps:

  1. Выдаліць папярэдні фільтр: Unplug the air purifier and remove the pre-filter as described in the Setup section.
  2. Машынная мыйка: Place the fabric pre-filter in a washing machine. Use a gentle, low-temperature cycle with mild detergent. Avoid using bleach or harsh chemicals, as these can damage the fabric or affect its filtration properties.
  3. Сушка на паветры: After washing, hang the pre-filter to air dry completely. Do not tumble dry. Ensure the pre-filter is fully dry before re-installing it on the air purifier to prevent moisture damage to the unit.

Заўвага: Over time, the pre-filter may show discoloration due to the accumulation of trapped particles. This is normal and indicates the filter is performing its function. While washing will remove most dirt, some staining may persist, which does not affect performance.

Ліквідацыю непаладак

  • Pre-Filter Does Not Fit: Ensure you have the correct pre-filter model (110055) for your Blue Pure 211i Max air purifier. This pre-filter is not compatible with 211+ or 211+ Auto models.
  • Паменшаны паток паветра: If airflow from your air purifier seems reduced, the pre-filter may be heavily soiled. Perform a routine or deep clean as described in the Maintenance section.
  • Ўстойлівыя пахі: While the pre-filter captures particles, persistent odors may indicate that the main filter needs replacement. Refer to your air purifier's main instruction manual for filter replacement schedules.
  • Pre-Filter Discoloration After Washing: Some staining or discoloration may remain on the fabric even after washing. This is normal due to the nature of trapped pollutants and does not impact the pre-filter's ability to capture particles.

Тэхнічныя характарыстыкі

МаркаBLUEAIR
Нумар мадэлі110055
Назва тыпу элементаПапярэдні фільтр
КолерЗялёны мох
АсаблівасцьWashable, Reusable
СумяшчальнасцьBlue Pure 211i Max Air Purifier (Not compatible with 211+ or 211+ Auto)
UPC689122023472

Гарантыя і падтрымка

For specific warranty information regarding your BLUEAIR Genuine Pre-Filter, please refer to the documentation included with your original air purifier purchase or visit the official Blueair website. For technical support or further assistance, please contact Blueair customer service directly.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.