1. Уводзіны
The tiiwee A1 Wireless Home Security Alarm System is designed to provide effective protection against intruders for your home, apartment, garage, garden shed, RV, or caravan. This system is easy to install, requiring no complex wiring or drilling, and can be set up in minutes. It features a powerful 120 dB siren to deter potential threats and can be expanded with additional tiiwee accessories.
Image 1.1: The tiiwee A1 system is suitable for various applications including homes, garages, garden sheds, and mobile homes.
2. Змесціва ўпакоўкі
Калі ласка, праверце ўпакоўку, каб пераканацца ў наяўнасці ўсіх кампанентаў:
- 1x tiiwee A1 Wireless Siren with 4 Zone Lights
- 2x Wireless Door/Window Sensors (magnetic contact)
- 1x Wireless Remote Control with button protection
- AAA Batteries (for siren and sensors)
- Mounting accessories (screws, adhesive pads)
- Кіраўніцтва карыстальніка
Image 2.1: Components included in the tiiwee A1 Essential Home Security Alarm Kit.
3. Кампаненты прадукту
3.1. A1 Wireless Siren
The main unit of the alarm system. It emits a loud 120 dB alarm sound and features indicator lights for different zones. It also functions as a doorbell chime.
3.2. Wireless Door/Window Sensors
These two-part magnetic sensors detect when a door or window is opened. When separated, they send a signal to the A1 siren.
3.3. Бесправадны пульт дыстанцыйнага кіравання
Used to arm, disarm, and switch modes of the A1 siren. It features a sliding cover to prevent accidental button presses.
4. Настройка
4.1. Устаноўка батарэі
The A1 siren and door/window sensors require AAA batteries. The remote control uses a different type of battery, typically a coin cell, which is usually pre-installed or included.
- A1 Siren: Open the battery compartment on the back of the siren. Insert the required AAA batteries, ensuring correct polarity (+/-). Close the compartment.
- Датчыкі дзвярэй/вокан: Slide open the cover of each sensor. Insert the required AAA batteries, observing polarity. Close the cover.
- Пульт дыстанцыйнага кіравання: The battery is typically pre-installed. If replacement is needed, refer to the specific instructions for the remote control.
4.2. Pairing Components (Pre-connected)
The components in your tiiwee A1 kit are pre-connected at the factory. No manual pairing is required for initial setup. If you purchase additional accessories, refer to the 'System Expansion' section for pairing instructions.
4.3. Інструкцыя па мантажы
The system can be mounted using screws or the provided adhesive pads.
- A1 Siren: Choose a central location within your property, ensuring it is audible throughout. Mount it securely using screws or adhesive pads.
- Датчыкі дзвярэй/вокан: Install the two parts of each sensor on the door/window frame and the moving part (door/window) itself. Ensure the two parts are aligned and within 1 cm of each other when the door/window is closed.
Малюнак 4.1: Прыкладample of magnetic sensor installation on a door.
5. Інструкцыя па эксплуатацыі
5.1. Уключэнне і зняцце сістэмы з аховы
Use the remote control to manage the alarm system:
- Рука: Націсніце Замак button on the remote control. The siren will emit a confirmation sound, and the system will be armed. Any triggered sensor will activate the alarm.
- Зняць з аховы: Націсніце Разблакіраваць button on the remote control. The siren will emit a confirmation sound, and the system will be disarmed.
5.2. Switching Between Alarm and Chime Mode
The A1 siren can function as a loud alarm or a gentle doorbell chime. To switch modes:
- Ensure the A1 siren is disarmed (unlocked).
- Націсніце «С» button on the remote control. The siren will cycle between the alarm sound and the chime sound. Select your desired mode.
- The selected mode will remain active until changed again.
5.3. Panic Button
У надзвычайнай сітуацыі націсніце кнопку Званочак button on the remote control to immediately trigger the siren's alarm, regardless of the system's armed status.
6. Пашырэнне сістэмы
The tiiwee A1 system is expandable. You can add more door/window sensors, motion detectors (indoor/outdoor), additional remote controls, and outdoor sirens from the tiiwee Home alarm range.
6.1. Pairing New Accessories
To pair a new accessory (e.g., an additional sensor or remote) with your A1 siren:
- Put the A1 siren into learning mode (refer to the siren's specific instructions for this, usually involves pressing a button on the siren).
- Activate the new accessory (e.g., separate the magnetic parts of a sensor, press a button on a remote).
- The A1 siren will emit a confirmation sound, indicating successful pairing.
Image 6.1: The tiiwee A1 system can be expanded with various accessories to cover an entire property.
Выява 6.2: Канецview of compatible tiiwee accessories for system expansion.
7. Тэхнічнае абслугоўванне
7.1. Замена батарэі
The A1 siren and sensors are powered by AAA batteries, which typically have a long lifespan (approximately 10 months). When batteries are low, the siren or sensor may indicate this with a specific light or sound pattern (refer to specific device indicators).
- Open the battery compartment of the device requiring new batteries.
- Выміце старыя батарэі і ўтылізуйце іх адказна.
- Insert new AAA batteries, ensuring correct polarity.
- Зачыніце батарэйны адсек.
8. Выпраўленне непаладак
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Siren does not activate. | Low batteries in siren or sensor. System is disarmed. Sensor not properly aligned or too far apart. | Replace batteries. Arm the system using the remote. Check sensor alignment and distance. |
| Не працуе пульт дыстанцыйнага кіравання. | Low battery in remote. Remote out of range. | Replace remote control battery. Move closer to the siren. |
| Ілжывыя трывогі. | Sensor improperly installed or loose. Environmental factors (e.g., strong vibrations). | Re-secure or re-align sensors. Ensure sensors are not in areas prone to false triggers. |
| Cannot pair new accessories. | Siren not in learning mode. Accessory not activated during pairing window. | Ensure siren is in learning mode. Activate accessory immediately after putting siren in learning mode. |
9. Тэхнічныя характарыстыкі
- Марка: tiiwee
- мадэль: A1 (TWHAK01V2)
- вытворца: Tiiwee B.V.
- Памеры прадукту: 9.7 х 4.4 х 2 см
- Вага: 430 grams (total package)
- колер: Белы
- Крыніца харчавання: Харчаванне ад батарэі
- Неабходныя батарэі: AAA (for siren and sensors)
- Тэрмін службы батарэі: Прыкладна 10 месяцаў
- тtage: 1.5 вольт
- Спосаб ўстаноўкі: DIY Wireless
- Узровень гуку: 120 дэцыбел
- Тэхналогія падключэння: Бесправадная сувязь
- Метад кантролю: Пульт дыстанцыйнага кіравання
10. Гарантыя і падтрымка
10.1. Інфармацыя аб гарантыі
The tiiwee A1 Wireless Home Security Alarm System comes with a Гарантыя 2 год з даты пакупкі. Гэтая гарантыя распаўсюджваецца на вытворчыя дэфекты і гарантуе належную працу прадукту пры нармальным выкарыстанні. Калі ласка, захавайце пацвярджэнне пакупкі для прэтэнзій па гарантыі.
10.2. Палітыка вяртання
A 30-day return policy for refund or replacement is typically offered from the date of purchase. Please refer to your retailer's specific return policy for detailed terms and conditions.
10.3. Падтрымка кліентаў
For technical assistance, troubleshooting, or warranty inquiries, please contact tiiwee customer support through the retailer's platform or the official tiiwee website. Please have your model number (A1 or TWHAK01V2) and purchase details ready.