1. Прадукт скончыўсяview
The Labelife TZe-135 compatible laminated label tape is designed for use with various Brother P-Touch label makers. This tape features white text on a clear background, providing a professional and versatile labeling solution. Each cartridge contains 12mm (0.47 inch) wide and 8 meters (26.2 feet) long tape.
Key features include strong adhesion, a split backing for easy peeling, and resistance to water, abrasion, temperature, and fading, making it suitable for a wide range of indoor and outdoor applications.
Image 1.1: Labelife TZe-135 tape cartridge with dimensions (12mm width, 8m length) and clear tape visible.
2. Сумяшчальнасць
This Labelife TZe-135 tape is compatible with a broad range of Brother P-Touch label makers, including but not limited to the following models:
- PT-D200, PT-D210, PT-D220, PT-D400, PT-D400AD, PT-D400VP, PT-D450, PT-D600, PT-D600VP
- PT-1090, PT-1190, PT-1230PC, PT-1290, PT-1880C, PT-1890C, PT-1890SC, PT-1890W, PT-1950
- PT-2430PC, PT-D800W, PT-H100, PT-E100, PT-H110, PT-H300, PT-H300LI, PT-H500LI
- PT-P700, PT-P750W, PT-9600
Image 2.1: Labelife TZe-135 tape cartridge shown with a compatible Brother P-Touch label maker and a partial list of compatible models.
3. Ўстаноўка і налада
Follow these steps to properly install the label tape cartridge into your Brother P-Touch label maker:
- Open the tape compartment cover of your label maker.
- Before inserting, ensure the end of the tape passes through the two fixed buckles on the cartridge.
- Turn the green gear on the tape cartridge in the direction of the arrow until the ribbon is straightened and taut. This helps prevent tape jams.
- Insert the tape cartridge firmly into the label maker's compartment. Ensure it clicks into place.
- Gently pull out a small length of tape (approximately 3-4 cm) from the tape outlet. This extended portion should exceed the paper outlet of the label maker.
- Шчыльна зачыніце вечка адсека для стужкі.
For a visual guide, please refer to the installation video below.
Video 3.1: Demonstration of installing the Labelife TZe-135 label tape cartridge into a Brother P-Touch label maker, including pre-installation steps and proper seating.
Image 3.1: Visual guide for pre-installation steps, showing how to turn the green gear and extend the tape.
4. Інструкцыя па эксплуатацыі
Once the tape cartridge is installed, you can begin printing labels. The Labelife TZe-135 tape is designed for clear printing without jamming.
4.1 Друк этыкетак
Refer to your specific Brother P-Touch label maker's manual for detailed instructions on creating and printing labels. Ensure your label maker settings are appropriate for 12mm tape width.
4.2 Peeling Labels
The Labelife TZe-135 tape features a split backing for easy peeling. To peel a label:
- Gently bend the label along its length to reveal the split in the backing.
- Peel off one half of the backing, then the other.
- Apply the label to your desired surface.
The strong adhesive ensures the label stays in place, and it can be removed without leaving sticky residue.
5. Тэхнічнае абслугоўванне і даўгавечнасць
Labelife TZe-135 laminated label tape is engineered for durability and longevity in various conditions:
- Воданепранікальнасць: Labels maintain integrity even when exposed to water.
- Устойлівасць да ізаляцыі: Designed to withstand rubbing and scratching.
- Тэмпературная ўстойлівасць: Performs reliably across a range of temperatures.
- Устойлівы да выцвітання: Text remains clear and legible over time, even with sun exposure.
To clean labeled surfaces, you may wipe them with a damp cloth. The labels are designed to resist common cleaning agents and maintain their appearance.
Image 5.1: Visual representation of the label tape's durability features: water, abrasion, temperature, and fade resistance.
Малюнак 5.2: Прыкладamples of versatile applications for the label tape in various environments.
6. Выпраўленне непаладак
6.1 Tape Jams
If the tape jams during printing, ensure the tape cartridge was installed correctly, with the ribbon straightened by turning the green gear before insertion. If a jam occurs, carefully open the label maker cover, remove the cartridge, and inspect for any tangled tape. Re-insert the cartridge following the installation steps precisely.
6.2 Нізкая якасць друку
If print quality is poor (faint, incomplete, or smudged text), check the following:
- Ensure the tape cartridge is fully seated in the label maker.
- Verify that the label maker's print head is clean. Refer to your label maker's manual for cleaning instructions.
- Confirm that the label maker's batteries are not low, as this can affect print quality.
7. Тэхнічныя характарыстыкі
| Асаблівасць | Дэталь |
|---|---|
| Нумар мадэлі | ТЗэ-135 |
| Колер | White print on Clear background |
| Памер (шырыня) | 12 мм (0.47 цалі) |
| Даўжыня | 8 метраў (26.2 футы) |
| Матэрыял | Пластыкавыя |
| Тып аздаблення | Ламінаваныя |
| Колькасць элементаў | 5 шт |
| Асаблівасці трываласці | Water Resistant, Abrasion Resistant, Temperature Resistant, Fade Resistant |
8. Гарантыя і падтрымка
For any questions, concerns, or support regarding your Labelife TZe-135 compatible label tape, please contact Labelife customer service. Refer to the product packaging or the Labelife official webсайт для кантактнай інфармацыі.
Labelife is committed to product quality and customer satisfaction. If you experience any issues, please reach out to our support team for assistance.