Прадукт скончаныview
The Milesight MS-C2972-FIPB is a 2MP Pro Dome IP Day/Night Network Camera designed for robust surveillance applications. It features remote focus and zoom capabilities, an IK10 vandal-proof and IP66 weather-resistant casing, and advanced imaging technologies like 140 dB WDR (Wide Dynamic Range) and Smart IR II for superior image quality in varying light conditions.
This camera supports H.265 video compression for efficient storage and bandwidth usage, and includes a 256GB MicroSD card slot for on-board storage. It is fully ONVIF compliant, ensuring broad compatibility with various network video recorders (NVRs) and video management systems (VMS).
Асноўныя характарыстыкі
- Motorized Zoom and Focus: Allows for remote adjustment of the camera's field of view і рэзкасць.
- IK10 Vandal-proof & IP66 Weather-resistant: Ensures durability and protection against impact and harsh environmental conditions, suitable for outdoor use.
- 140 dB WDR: Provides clear images in scenes with strong contrast, such as bright backlighting.
- Smart IR II: Advanced infrared technology for uniform illumination in low-light conditions, preventing overexposure of close objects.
- Сцісканне H.265+: Reduces bandwidth and storage requirements significantly compared to older compression standards.
- 256GB MicroSD Support: Enables on-board storage for local recording and redundancy.
- Full ONVIF Compliance: Ensures interoperability with a wide range of surveillance equipment.
- SIP/VoIP Support: Integrates voice and video over IP for enhanced communication capabilities.
Настройка і ўстаноўка
Змест пакета
Перад пачаткам усталёўкі пераканайцеся, што ўсе кампаненты наяўныя:
- Milesight MS-C2972-FIPB IP Camera
- Мантажны шаблон
- Мантажныя шрубы і дзюбелі
- Воданепранікальны раз'ём для кабеля Ethernet
- Кароткае кіраўніцтва
Мантаж камеры
The MS-C2972-FIPB is designed for ceiling mount installation. Follow these steps:
- Падрыхтуйце мантажную паверхню: Choose a suitable location on a ceiling or wall that can support the camera's weight and provides the desired field of view.
- Detach the Mounting Plate: Rotate the camera body counter-clockwise to detach it from the mounting plate. This plate will be secured to the surface first.
- Пазначце адтуліны для свідравання: Use the provided mounting template to mark the positions for drilling holes on the mounting surface.
- Свідраваць адтуліны: Drill holes according to the marked positions. Insert wall plugs if mounting on a masonry surface.
- Надзейная мантажная пласціна: Attach the mounting plate to the surface using the provided screws.
- Падключыце кабелі: Route the Ethernet cable through the mounting plate and connect it to the camera's RJ45 port. Ensure a waterproof connection using the supplied connector for outdoor installations. If not using PoE, connect the DC12V power supply.
- Прымацуйце корпус камеры: Align the camera body with the mounting plate and rotate clockwise until it locks securely into place.
Network Connection and Initial Setup
The camera supports Power over Ethernet (PoE) for simplified installation, requiring only one Ethernet cable for both power and data. Alternatively, it can be powered by a 12V DC adapter.
- Падключэнне да сеткі: Connect the camera to your network switch or router using an Ethernet cable. If using PoE, ensure your switch supports PoE (802.3af).
- Адкрыйце для сябе камеру: Use the Milesight Smart Tools software (available on the Milesight webсайт), каб знайсці камеру ў вашай сетцы.
- Прызначыць IP-адрас: Assign a static IP address or configure DHCP for the camera.
- Доступ Web інтэрфейс: Адкрыйце a web браўзер і ўвядзіце IP-адрас камеры, каб атрымаць доступ да яе web інтэрфейс.
- Першапачатковы ўваход: Log in using the default username and password (refer to the Quick Start Guide for default credentials). It is highly recommended to change the default password immediately for security.
- Абнаўленне прашыўкі: Check for and install any available firmware updates to ensure optimal performance and security.
Кіраванне камерай
Remote Focus and Zoom
The MS-C2972-FIPB features a motorized varifocal lens, allowing you to adjust the zoom and focus remotely from the camera's web interface or compatible NVR/VMS software. This eliminates the need for manual adjustment at the camera's physical location.
Канфігурацыя відэа
Access the "Video" settings in the web інтэрфейс для канфігурацыі:
- дазвол: Up to 1920x1080 (2MP).
- Частата кадраў: Adjust for desired smoothness of video.
- Сцісканне: Select H.265+, H.265, H.264+, H.264, or MJPEG. H.265+ is recommended for efficiency.
- Бітрэйт: Configure constant (CBR) or variable (VBR) bit rates.
- Налады выявы: Adjust brightness, contrast, saturation, sharpness, WDR, and noise reduction.
- Маскіроўка прыватнасці: Define up to 8 areas to be masked for privacy concerns.
Канфігурацыя аўдыё
The camera includes a built-in microphone and supports two-way audio via an audio output interface. Configure audio settings under the "Audio" section:
- Аўдыё: G.711, AAC, G.722, G.726.
- Ўзмацненне мікрафона: Adjust sensitivity of the built-in microphone.
- Двухбаковы аўдыё: Enable and configure for interactive communication.
Storage and Recording
The camera supports local storage on a MicroSD card up to 256GB. Configure recording schedules, motion detection recording, and continuous recording options in the "Storage" settings.
SIP/VoIP Integration
The MS-C2972-FIPB supports SIP/VoIP for voice and video-over-IP functionality. This allows for integration with VoIP systems for advanced communication and monitoring. Refer to the "System" or "Network" settings for SIP/VoIP configuration.
Тэхнічнае абслугоўванне
Уборка
- Lens and Dome Cover: Regularly clean the camera lens and the transparent dome cover with a soft, clean cloth. For stubborn dirt, use a mild, non-abrasive cleaning solution specifically designed for optical surfaces. Avoid harsh chemicals that could damage the coating.
- Корпус камеры: Працярыце корпус камеры рэкламайamp сурвэткай для выдалення пылу і бруду.
Абнаўленне прашыўкі
Periodically check the Milesight official website for new firmware versions. Keeping the firmware updated ensures optimal performance, introduces new features, and addresses potential security vulnerabilities.
- Спампуйце апошнюю версію прашыўкі file from the Milesight support page.
- Доступ да камеры web interface and navigate to the "System" or "Maintenance" section.
- Follow the on-screen instructions to upload and install the firmware. Do not power off the camera during the update process.
Экалагічныя меркаванні
Although the camera is IP66 rated for weather resistance, extreme conditions can still affect performance. Ensure proper drainage around the camera if installed in areas prone to heavy rain or snow accumulation. Avoid direct exposure to prolonged strong sunlight if possible, as this can affect image quality and component lifespan.
Ліквідацыю непаладак
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Камера не ўключаецца. | No power supply; PoE not active; faulty cable. | Check power adapter/PoE switch. Ensure Ethernet cable is properly connected and functional. |
| Немагчыма атрымаць доступ да камеры праз web браўзер. | Incorrect IP address; network connectivity issue; firewall blocking. | Verify IP address. Check network cable. Temporarily disable firewall on PC. Use Milesight Smart Tools to discover camera. |
| Poor image quality (blurry, dark, overexposed). | Lens out of focus; incorrect image settings; dirty lens/dome; insufficient IR illumination. | Adjust focus remotely. Configure brightness, contrast, WDR, and IR settings. Clean lens and dome cover. |
| No video recording to MicroSD card. | MicroSD card full/faulty; recording schedule not configured; motion detection not triggered. | Check MicroSD card status and format if necessary. Verify recording schedule and motion detection settings. |
| Vandalism or physical damage. | External impact. | The camera is IK10 vandal-proof, but extreme force can still cause damage. Contact support for repair options. |
Тэхнічныя характарыстыкі
| Асаблівасць | Дэталь |
|---|---|
| Нумар мадэлі | MS-C2972-FIPB |
| Датчык выявы | 1/2.8-цалевая CMOS-матрыца з прагрэсіўнай разгорткай |
| Макс. Дазвол выявы | 1920x1080 (2 МП) |
| Мін. Ілюмінацыя | Color: 0.002Lux@F1.2; B/W: 0Lux with IR on |
| Тып аб'ектыва | Motorized P-IRIS varifocal 3.0~10.5mm (Optional: 2.7~13.5mm/ 7~22mm) |
| ІЧ адлегласць | Up to 50m (3.0~10.5mm lens); Up to 90m (7~22mm lens) |
| Кампрэсія відэа | H.265+/ H.265(HEVC)/ H.264+/ H.264/MJPEG |
| WDR | 140 dB Super WDR |
| Аўдыё ўвод-вывад | Убудаваны мікрафон і 1 інтэрфейс аўдыявыхаду |
| Захоўванне | Support micro SD/SDHC/SDXC Card, up to 256GB |
| Сеткавы інтэрфейс | 1*порт RJ45 10M/100M Ethernet |
| Сумяшчальнасць сістэмы | ONVIF Profile G&Q&S&T, API |
| Электразабеспячэнне | PoE (802.3af) / DC12V±10% |
| Энергаспажыванне | 8W Max; 12W Max (With IR on) |
| Памеры | Φ143mm x 108.4mm (5.63 x 4.27 x 4.27 inches) |
| Вага | Прыбл. 3.28 фунта |
| Абарона ад пранікнення | IP66 |
| Супраціў вандалам | ІК10 |
Гарантыя і падтрымка
Specific warranty details for the Milesight MS-C2972-FIPB camera are typically provided at the point of purchase or can be found on the official Milesight webсайт. Калі ласка, захавайце пацвярджэнне пакупкі для прэтэнзій па гарантыі.
For technical support, product inquiries, or service requests, please visit the official Milesight support portal or contact their customer service. Contact information is usually available on the manufacturer's webсайт.
Note: This manual provides general guidance. For detailed technical specifications and advanced configurations, please refer to the complete product documentation available on the Milesight official webсайт.
