1. Прадукт скончыўсяview
The Logitech CAT5E KIT TAP Graphite is designed to simplify the connection of Logitech Tap devices to a meeting room computer. This kit utilizes standard Cat5e cabling to transmit both data and power over a single cable, eliminating the need for separate power outlets at the Tap location. It supports cable runs of up to 40 meters, offering significant flexibility in room layout and installation.
The kit includes all necessary cabling, a power supply, and adapters to facilitate a clean and efficient setup. It is compatible with various Logitech Tap mounting solutions, including Table Mount, Riser Mount, and Wall Mount, allowing for integrated cable routing and a tidy appearance.
2. Змесціва ўпакоўкі
Праверце, ці ёсць у вашай упакоўцы ўсе пералічаныя ніжэй прадметы:
- Cat5e Cables (10 meters included, supports up to 40 meters with user-supplied cabling)
- Блок харчавання
- USB Data and Power Adapters
Figure 2.1: Complete Logitech CAT5E KIT TAP Graphite components.
3. Інструкцыі па ўсталёўцы
Follow these steps to set up your Logitech CAT5E KIT TAP Graphite:
- Prepare the Cables: The kit includes 10 meters of Cat5e cabling. If a longer run is required (up to 40 meters), you may use your own Cat5e or higher cabling. For custom lengths, cables can be cut and crimped to exact specifications to minimize clutter.
- Connect the Adapters: Identify the USB data and power adapters. One adapter connects to the Logitech Tap device, and the other connects to the meeting room computer.
- Connect Cat5e Cable: Connect one end of the Cat5e cable to the adapter connected to the Logitech Tap. Connect the other end of the Cat5e cable to the adapter connected to the meeting room computer. Ensure secure connections at both ends.
- Падключыце крыніцу сілкавання: Plug the power supply unit into a suitable power outlet and connect it to the designated power input on the appropriate adapter (typically the one near the computer or power injector). This supplies power over the Cat5e cable to the Logitech Tap.
- Integrate with Mounts (Optional): If using a Logitech Tap Table Mount, Riser Mount, or Wall Mount, route the Cat5e cable through the mount's integrated cable management system for a clean and secure installation.
Figure 3.1: USB-C adapter for Logitech Tap connection.
Figure 3.2: Power injector with IN/OUT ports for Cat5e cabling.
4. Інструкцыя па эксплуатацыі
Once the Logitech CAT5E KIT TAP Graphite is properly installed and connected, it operates automatically. The kit facilitates the transmission of both USB data and power from the meeting room computer to the Logitech Tap device over a single Cat5e cable.
Ensure that the meeting room computer and the Logitech Tap are powered on. The kit will then provide the necessary connectivity for the Tap to function as intended within your meeting room setup. No additional user interaction is required for the kit itself beyond initial setup.
5. Тэхнічнае абслугоўванне
To ensure the longevity and optimal performance of your Logitech CAT5E KIT TAP Graphite, consider the following maintenance guidelines:
- Сыход за кабелем: Avoid sharp bends, kinks, or excessive pulling on the Cat5e cables. This can damage the internal wires and affect performance.
- Абарона раздыма: Keep the RJ45 connectors clean and free from dust or debris. Avoid forcing connectors into ports.
- Умовы навакольнага асяроддзя: Store and operate the kit in a dry environment, away from extreme temperatures and direct sunlight.
- Уборка: If necessary, gently wipe the external surfaces of the adapters and power supply with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
6. Выпраўленне непаладак
If you encounter issues with your Logitech CAT5E KIT TAP Graphite, refer to the following common problems and solutions:
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| No data or power to Logitech Tap | Няшчыльныя кабельныя злучэнні Блок сілкавання не падключаны або няспраўны Damaged Cat5e cable Incorrectly crimped custom cable | Ensure all Cat5e and power connections are secure. Verify the power supply is plugged in and functioning. Inspect the Cat5e cable for visible damage. Try a different cable if available. If using a custom cable, re-check crimping for proper pinout. |
| Перарывістае злучэнне | Damaged cable or connectors Умяшанне навакольнага асяроддзя | Check cables and connectors for any signs of wear or damage. Ensure cables are not run near sources of strong electromagnetic interference. |
| Logitech Tap not recognized by computer | Праблемы з драйверамі на кампутары Kit not providing proper data signal | Ensure the latest drivers for Logitech Tap are installed on the computer. Verify all kit components are correctly connected and powered. Restart the computer and Tap. |
If the issue persists after attempting these solutions, please contact Logitech customer support for further assistance.
7. Тэхнічныя характарыстыкі
- Марка: Logitech
- Назва мадэлі: CAT5E KIT TAP GRAPHITE
- Нумар мадэлі тавару: 952-000019
- Тып кабеля: Ethernet (Cat5e or higher compatible)
- Сумяшчальныя прылады: Кран Logitech
- Максімальная даўжыня кабеля: Да 40 метраў (131 футаў)
- асаблівасць: Cable Management System compatibility
- Энергазабеспячэнне: Power over Cat5e (PoE-like functionality)
- Перадача дадзеных: USB data over Cat5e
- колер: Шэры
- Вага прадмета: Прыблізна 998 грамаў (2.2 фунта)
8. Гарантыя і падтрымка
This Logitech product is covered by a limited hardware warranty. For detailed warranty information, terms, and conditions, please refer to the warranty documentation included with your product or visit the official Logitech support webсайт.
For technical support, troubleshooting guides, and frequently asked questions, please visit the Logitech support portal:
Наведайце службу падтрымкі Logitech
Пры звароце ў службу падтрымкі падрыхтуйце нумар мадэлі прадукту (952-000019) і серыйны нумар (пры наяўнасці).