Thank you for choosing the Scheppach SBP250 Submersible Pump. This manual provides essential instructions for the safe and efficient operation, setup, and maintenance of your pump. Designed for clean water transfer from rain barrels or cisterns, it features a powerful 250W motor, a capacity of 6500 liters per hour, and an automatic float switch for convenient use. Please read these instructions carefully before operating the device and keep them for future reference.
Інструкцыі па тэхніцы бяспекі
Заўсёды выконвайце наступныя меры бяспекі, каб пазбегнуць траўмаў або пашкоджанняў:
Ensure the power supply matches the specifications on the pump's rating plate.
Never operate the pump with a damaged power cord or plug.
Do not lift or carry the pump by its power cord.
Трымайце дзяцей і старонніх асоб далей ад зоны эксплуатацыі.
Заўсёды адключайце помпу ад электрасеткі перад выкананнем любога тэхнічнага абслугоўвання або чысткі.
The pump is designed for clean water only. Do not use it for flammable, corrosive, or explosive liquids.
Падчас працы пераканайцеся, што помпа цалкам пагружаны ў ваду, каб пазбегнуць перагрэву.
Avoid running the pump dry.
Прадукт скончаныview
The Scheppach SBP250 submersible pump is designed for efficient water transfer. Familiarize yourself with its main components:
Малюнак 1: Scheppach SBP250 Submersible Pump. This image shows the pump unit, including the integrated handle, power cable, float switch, and the discharge connection point.
Корпус помпы: Durable plastic housing protecting the motor and internal components.
Матор: Powerful 250W motor for efficient water pumping.
Паплавок перамыкач: Automatically turns the pump on and off based on water level.
Разраднае злучэнне: Standard 1¼" connection for hoses.
Сілавы кабель: 10-meter cable for extended reach, designed to be plugged outside the wet area.
Ручка: Integrated handle for easy transport and lowering/raising the pump.
Настройка
Follow these steps to set up your submersible pump:
Распакаванне: Carefully remove the pump from its packaging. Check for any signs of damage.
Злучэнне шланга: Attach a suitable discharge hose (not included) to the 1¼" discharge connection. Ensure a tight and secure fit to prevent leaks.
Размяшчэнне помпы:Малюнак 2: Pump positioned in water with the float switch freely moving. The pump is ready for operation.Place the pump on a stable, level surface in the water source (e.g., rain barrel, cistern). Ensure the pump is fully submerged and not resting on mud or debris that could block the intake. The float switch must be able to move freely to ensure automatic operation.
Падключэнне сілкавання: Ensure your hands are dry. Plug the 10-meter power cable into a grounded electrical outlet. The outlet should be located outside the wet area.
Аперацыйная
The SBP250 pump operates automatically via its float switch:
Аўтаматычная праца: Once plugged in and submerged, the pump will automatically start when the water level rises and lifts the float switch. It will stop when the water level drops and the float switch lowers.
Ручное кіраванне (калі ёсць): Some models allow the float switch to be fixed in an 'up' position for continuous operation. Refer to the specific instructions for your model if this feature is desired. For the SBP250, ensure the float switch can move freely for standard automatic operation.
Маніторынг: Periodically check the pump's operation and the water level. Ensure the discharge hose is clear and directing water as intended.
Малюнак 3: The SBP250 pump actively pumping water from a pond, demonstrating its intended use for water transfer.
Тэхнічнае абслугоўванне
Рэгулярнае тэхнічнае абслугоўванне забяспечвае даўгавечнасць і аптымальную прадукцыйнасць вашага помпы:
Уборка: After each use, especially if pumping slightly dirty water, rinse the pump thoroughly with clean water. Remove any debris that may have accumulated around the intake screen.
агляд: Regularly inspect the power cable and plug for any damage. Check the discharge connection for wear or leaks.
Зімовае захоўванне: If storing the pump in freezing temperatures, ensure all water is drained from the pump and hose to prevent damage from ice expansion. Store in a dry, frost-free location.
Няма частак, якія абслугоўваюцца карыстальнікам: The motor and internal components are not user-serviceable. Do not attempt to open the pump housing.
Ліквідацыю непаладак
Вось некаторыя агульныя праблемы і іх рашэнні:
праблема
Магчымая прычына
Рашэнне
Помпа не запускаецца.
Няма крыніцы харчавання. Float switch not activated. Крыльчатка заблакаваная.
Праверце падключэнне сілкавання і аўтаматычны выключальнік. Ensure water level is high enough to lift the float switch. Disconnect power, then check and clear any blockages in the intake area.
Помпа працуе, але вада не паступае.
Паветраны шлюз. Discharge hose blocked or kinked. Узровень вады занадта нізкі.
Slightly tilt the pump to release trapped air. Check and clear the discharge hose. Ensure pump is fully submerged.
Wait for water level to rise or manually adjust float switch position (if applicable). Disconnect power, let the pump cool down, then check for blockages or dry running.
Тэхнічныя характарыстыкі
Асаблівасць
Каштоўнасць
Марка
Шэпах
Нумар мадэлі
SBP250 (Reference: 5909506901)
Магутнасць
250 Вт
тtage
230 вольт
Макс. Выдатак
6500 XNUMX літраў у гадзіну
Max. Discharge Height
7 метраў
Разраднае злучэнне
1¼"
Даўжыня кабеля
10 метраў
Матэрыял
Пластыкавыя
Вага
4 кілаграма
Памеры (Д х Ш х У)
1 х 1 х 1 см (Note: These dimensions appear to be generic; actual product dimensions may vary.)
Гарантыя і падтрымка
Scheppach products are manufactured to high-quality standards. For warranty information or technical support, please refer to the warranty card included with your purchase or visit the official Scheppach website. Please have your model number (SBP250) and purchase details ready when contacting support.
For further assistance, you may contact Scheppach customer service directly. Contact details can typically be found on the manufacturer's webсайце або ва ўпакоўцы прадукту.
