APC Network Management Card 3 (NMC3) Instruction Manual

1. Уводзіны

The APC Network Management Card 3 (NMC3) is a UPS management adapter designed to provide essential and secure remote monitoring and management capabilities for your Uninterruptible Power Supply (UPS). This card enhances visibility into your UPS operations, ensuring mission-critical systems remain protected and operational. It supports environmental monitoring and Modbus communication, offering comprehensive control and data collection.

2. Асноўныя магчымасці

• Secure Remote Monitoring and Management: Enables essential and secure remote monitoring and management of a UPS.
• Маніторынг навакольнага асяроддзя: Included Universal I/O (UIO) ports support environmental monitoring.
• Падтрымка Modbus RTU: Serial RS-485 port supports Modbus RTU for industrial control systems.
• Высокахуткасны працэсар: Provides a fast and powerful experience with Gigabit Ethernet connectivity.
• Multiple User Logins: Supports simultaneous multiple user logins to the easy-to-use web user interface or Command Line Interface (CLI).
• Advanced Security Compliance: Features best-in-class security compliance, with firmware independently certified to IEC 62443-4-2 standard.
• Інтэграцыя праграмнага забеспячэння: Integrates with EcoStruxure IT for efficient equipment management, PowerChute Network Shutdown for graceful shutdown and VM migration, and other SNMP-enabled systems.

3. Прадукт скончыўсяview

Network Management Card 3 (AP9643)

The APC Network Management Card 3 is a compact circuit board designed to fit into a SmartSlot on compatible UPS devices. It features various ports for network connectivity, environmental sensors, and console access.

Малюнак 1: Спераду view of the APC Network Management Card 3, showing the Ethernet port, USB ports, and console port.

Малюнак 2: Верх view of the APC Network Management Card 3, highlighting the circuit board and internal components.

4. Настройка і ўстаноўка

4.1. Installing the Network Management Card 3

Follow these steps to install the NMC3 into a compatible UPS:

1. Power Down UPS: Ensure the UPS is powered off and disconnected from the main power source to prevent electrical hazards.
2. Locate SmartSlot: Identify the SmartSlot on your compatible APC UPS. This is typically a rectangular slot on the rear panel.
3. Insert NMC3: Carefully slide the NMC3 into the SmartSlot until it is fully seated. Ensure the card is oriented correctly.
4. Бяспечная карта: Use any provided screws or retention clips to secure the NMC3 in place.
5. Падключыце сеткавы кабель: Connect a standard Ethernet cable from your network to the Ethernet port on the NMC3.
6. Connect Environmental Sensors (Optional): If using environmental monitoring, connect the Universal I/O (UIO) sensors to the appropriate ports on the NMC3.
7. Power On UPS: Reconnect the UPS to the main power source and power it on. The NMC3 will initialize automatically.

4.2. Пачатковая канфігурацыя

After installation, the NMC3 requires initial network configuration:

• Доступ Web карыстацкі інтэрфейс: Адкрыйце a web browser and enter the default IP address of the NMC3 (refer to your UPS documentation for the default IP, often DHCP assigned or a fallback IP).
• Лагін: Enter the default username and password (typically 'apc' for both). You will be prompted to change these for security.
• Налады сеткі: Configure static IP address, subnet mask, gateway, and DNS settings as required by your network environment.
• Дата і час: Set the correct date and time, preferably using an NTP server.

5. Інструкцыя па эксплуатацыі

5.1. Monitoring and Management

The NMC3 allows for comprehensive monitoring and management of your UPS:

• Web Карыстацкі інтэрфейс (Web Карыстацкі інтэрфейс): Provides a graphical interface to view UPS status, battery health, load levels, and configure settings.
• Інтэрфейс каманднага радка (CLI): Accessible via Telnet or SSH for advanced configuration and scripting.
• Падтрымліваюцца пратаколы: The NMC3 supports Telnet, SSH, HTTPS, and SSL for secure communication.

5.2. Маніторынг навакольнага асяроддзя

With connected environmental sensors, the NMC3 can monitor:

• тэмпература
• Вільготнасць
• Door contact status
• Other custom sensor inputs via Universal I/O ports.

Modbus RTU support via the RS-485 port allows integration with building management systems for centralized environmental data collection.

5.3. Інтэграцыя праграмнага забеспячэння

The NMC3 integrates with various software solutions:

• EcoStruxure IT: For cloud-based monitoring and management of your IT infrastructure.
• PowerChute Network Shutdown: Enables graceful shutdown of connected servers during extended power outages and supports VM migration.
• SNMP-enabled Systems: Allows integration with existing network management systems using SNMP protocol.

6. Тэхнічнае абслугоўванне

6.1. Абнаўленне прашыўкі

Regularly check for and apply firmware updates to ensure optimal performance, security, and compatibility. Firmware updates are typically available through the APC support website and can be applied via the NMC3's web Карыстацкі інтэрфейс або CLI.

6.2. Кіраванне батарэяй

The NMC3 monitors the battery status of the connected UPS. For information on UPS battery replacement and maintenance, refer to the specific user manual for your APC UPS model.

7. Выпраўленне непаладак

7.1. Распаўсюджаныя праблемы

• Няма падключэння да сеткі: Check Ethernet cable connection, network settings (IP address, subnet, gateway), and network switch status.
• Немагчыма атрымаць доступ Web карыстацкі інтэрфейс: Verify IP address, ensure network connectivity, and try clearing browser cache.
• NMC3 Not Detected by UPS: Ensure the card is fully seated in the SmartSlot and the UPS is powered on.
• Environmental Sensor Errors: Check sensor connections and ensure they are compatible with the UIO ports.

For more detailed troubleshooting, consult the comprehensive documentation available on the APC support webсайт.

8. Тэхнічныя характарыстыкі

9. Афіцыйныя відэа пра прадукт

10. Гарантыя і падтрымка

10.1. Інфармацыя аб гарантыі

The APC Network Management Card 3 includes a 1-year Secure NMC Subscription, which provides access to the latest firmware and security updates. For detailed warranty terms and conditions, please refer to the official APC warranty statement provided with your product or visit the APC webсайт.

10.2. Тэхнічная падтрымка

For technical assistance, troubleshooting, or product inquiries, please visit the official APC by Schneider Electric support website or contact their customer service. Support resources include FAQs, knowledge bases, and contact information for regional support teams.