Кіраўніцтва карыстальніка для корпуса ПК Sharkoon RGB SLIDER WT Mid-Tower

1. Уводзіны

The Sharkoon RGB SLIDER WT is a versatile mid-tower PC case designed for optimal functionality and aesthetic appeal. It features an integrated RGB LED strip on the front panel, offering customizable lighting effects. The case supports various component configurations, including multiple cooling fan options and extensive storage capabilities. A tempered glass side panel provides a clear view унутраных кампанентаў.

Малюнак 1.1: Пярэдні бок view of the Sharkoon RGB SLIDER WT PC Case, showcasing the RGB LED strip and tempered glass side panel.

2. Змесціва ўпакоўкі

Калі ласка, пераканайцеся, што ўсе прадметы прысутнічаюць у камплекце:

• Sharkoon RGB SLIDER WT PC Case
• 1x 120mm Rear Fan (pre-installed)
• Accessory Box (containing screws, cable ties, and this manual)

3. Тэхнічныя характарыстыкі

Image 3.1: Diagram illustrating the dimensions of the Sharkoon RGB SLIDER WT PC Case.

4. Настройка і ўстаноўка

4.1. Падрыхтоўка

Before beginning installation, ensure the PC case is placed on a stable, flat surface. Unpack all components and verify against the package contents list. It is recommended to wear an anti-static wrist strap to prevent damage to sensitive electronic components.

4.2. Устаноўка мацярынскай платы

1. Install the I/O shield into the designated slot at the rear of the case.
2. Align the motherboard with the standoffs inside the case. Ensure the I/O ports align with the I/O shield.
3. Замацуйце матчыну плату з дапамогай прадугледжаных шруб.

Малюнак 4.1: Інтэр'ер view of the PC case, showing the motherboard mounting area and pre-installed rear fan.

4.3. Усталёўка блока сілкавання (БС)

1. Locate the PSU tunnel at the bottom rear of the case.
2. Slide the PSU into the tunnel from the rear of the case, ensuring the fan faces downwards (if applicable, for bottom intake).
3. Замацуеце блок харчавання шрубамі з задняй часткі корпуса.

4.4. Усталёўка прылады захоўвання дадзеных

The case supports 3.5" HDDs and 2.5" SSDs.

• 3.5-цалевыя жорсткія дыскі: Install into the drive cage located within the PSU tunnel.
• 2.5-цалевыя SSD-назапашвальнікі: Mount onto the dedicated SSD trays behind the motherboard tray or on top of the PSU tunnel.

Малюнак 4.2: Задняя частка салона view, highlighting cable management options and locations for 2.5" SSDs and 3.5" HDD cage.

4.5. Expansion Card Installation (e.g., GPU)

1. Зніміце неабходныя вечкі слотаў PCIe з задняй панэлі корпуса.
2. Insert the expansion card into the corresponding PCIe slot on the motherboard.
3. Secure the card with screws.

4.6. Fan Installation (Optional)

Additional fans can be installed at the front and top of the case.

• Пярэднія вентылятары: Remove the front panel to access the mounting points for up to three 120mm fans.
• Лепшыя фанаты: Mount up to two 120mm or 140mm fans to the top panel.

4.7. Кіраванне кабелем

Utilize the cutouts and tie-down points behind the motherboard tray to route and secure cables. This improves airflow and maintains a clean interior aesthetic.

5. Інструкцыя па эксплуатацыі

5.1. Уключэнне

After all components are installed and cables connected, close the side panels. Connect the power cable to the PSU and a wall outlet. Press the power button on the top panel of the case to start your system.

Малюнак 5.1: Верх view of the case, detailing the front I/O panel with USB ports and audio jacks.

5.2. Кіраванне RGB-падсветкай

The front RGB LED strip can be controlled in two ways:

• Убудаваны кантролер: Use the dedicated RGB control button on the top panel to cycle through 14 preset lighting modes.
• Motherboard ARGB Sync: Connect the RGB cable from the case to a compatible 3-pin 5V ARGB header on your motherboard. The lighting can then be controlled via motherboard software (e.g., Asus Aura Sync, MSI Mystic Light Sync, Gigabyte Fusion, ASRock Polychrome SYNC).

5.3. Front Panel Ports

Пярэдняя панэль уводу/вываду забяспечвае зручны доступ да:

• 2x USB 3.0 ports for high-speed data transfer.
• 1x USB 2.0 port for general peripherals.
• Audio In (microphone) and Audio Out (headphone) jacks.

6. Тэхнічнае абслугоўванне

6.1. Уборка

• Знешні выгляд: Працярыце вонкавыя паверхні мяккай, damp тканіна. Пазбягайце абразіўных ачышчальнікаў.
• Пылавыя фільтры: Regularly remove and clean the dust filters (e.g., top magnetic filter, bottom PSU filter) to maintain optimal airflow and prevent dust buildup inside the case.
• Інтэр'ер: Use compressed air to remove dust from internal components and fan blades. Ensure the system is powered off and unplugged before cleaning the interior.

6.2. Паток паветра

Ensure that the case has adequate clearance around it for proper airflow. Avoid blocking intake or exhaust vents. Regularly check fan operation to ensure they are spinning correctly.

7. Выпраўленне непаладак

7.1. Сістэма не ўключаецца

• Verify that the power cable is securely connected to both the PSU and the wall outlet.
• Ensure the PSU's power switch is in the 'ON' position.
• Check that the front panel power button cable is correctly connected to the motherboard's front panel header.
• Confirm all internal power connections (24-pin ATX, CPU power, GPU power) are secure.

7.2. Fans Not Spinning

• Check fan power connections to the motherboard or fan controller.
• Ensure fan headers are enabled in the motherboard BIOS/UEFI settings.

7.3. RGB-падсветка не працуе

• If using the built-in controller, press the RGB button to cycle modes.
• If using motherboard sync, ensure the ARGB cable is correctly connected to a 3-pin 5V ARGB header (not 4-pin 12V RGB).
• Verify that the motherboard's RGB software is installed and configured correctly.

7.4. Front Panel USB/Audio Ports Not Functioning

• Check that the USB 3.0, USB 2.0, and HD Audio cables from the front panel are securely connected to the corresponding headers on the motherboard.
• Ensure motherboard drivers are installed.

8. Гарантыя і падтрымка

Sharkoon products are manufactured to high-quality standards. For detailed warranty information, please refer to the warranty card included with your product or visit the official Sharkoon website. For technical support, product inquiries, or service requests, please contact Sharkoon customer support through their official channels.

For further assistance, please visit the official Sharkoon webсайт: www.sharkoon.com