Weiser SmartCode 10 Touchscreen Electronic Deadbolt User Manual

Уводзіны

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Weiser SmartCode 10 Touchscreen Electronic Deadbolt with Z-Wave Technology. This smart lock is designed to offer enhanced security and convenience for your home. Please read this manual thoroughly before installation and use to ensure proper function and to maximize the benefits of your new deadbolt.

Фронт view of the Weiser SmartCode 10 Touchscreen Electronic Deadbolt in Satin Nickel finish.

Настройка і ўстаноўка

The Weiser SmartCode 10 deadbolt is designed for easy installation. Ensure you have all included components before beginning.

Уключаныя кампаненты:

• Зашчапка
• Страйк пліты
• Кольца адаптара
• Ключы
• Інструмент SmartKey
• Мантажныя вырабы
• Lock Assembly (Exterior and Interior)

Этапы ўстаноўкі:

1. Падрыхтуйце дзверы: Ensure your door is properly prepped for a standard deadbolt installation.
2. Усталюйце зашчапку: Устаўце зашчапку ў край дзвярэй і замацуйце яе шрубамі.
3. Усталюйце знешнюю зборку: Route the cable through the door and position the exterior keypad assembly.
4. Усталяваць унутраную зборку: Connect the cable from the exterior assembly to the interior assembly. Secure the interior assembly to the door using the provided mounting hardware.
5. Усталюйце батарэі: The lock requires batteries (not included). Insert 4 AA alkaline batteries into the battery pack located in the interior assembly.
6. Выканайце працэс адчынення дзвярэй: After battery installation, the lock will automatically determine door handing. This is crucial for proper operation.

The SmartCode 10 deadbolt seamlessly integrated into a residential door.

Першапачатковае праграмаванне:

• Master Code Creation: It is highly recommended to create a Master Code immediately after installation for enhanced security and to enable programming of user codes.
• Даданне кодаў карыстальнікаў: The lock supports up to 30 customizable user codes. Refer to the full programming guide for detailed steps on adding, deleting, and modifying user codes.

Operating the Deadbolt

Your SmartCode 10 deadbolt offers multiple ways to secure and access your home.

Keyless Entry via Touchscreen:

• Каб разблакіраваць: Touch the screen with your palm or fingers to activate the keypad. Enter your 4-8 digit user code. The deadbolt will retract.
• SecureScreen Technology: This feature displays random digits before you enter your code, preventing fingerprint analysis on the touchscreen and enhancing security.

A user interacting with the capacitive touchscreen to enter an access code.

Замыканне дзвярэй:

• Блакаванне адным дотыкам: Press the Lock button (padlock icon) on the keypad. The deadbolt will extend.
• Функцыя аўтаматычнай блакіроўкі: The deadbolt can be programmed to automatically lock 30 seconds after unlocking. This feature can be enabled or disabled through programming.

SmartKey Re-Key Technology:

This feature allows you to re-key your lock to a new key in seconds, providing flexibility and control over your home's security. This is useful if you lose a key or want to match your new deadbolt to an existing key from another Weiser lock.

1. Устаўце працоўны ключ і павярніце яго на 90 градусаў па гадзіннікавай стрэлцы.
2. Цалкам і шчыльна ўстаўце інструмент SmartKey у адтуліну SmartKey.
3. Выміце інструмент SmartKey і працоўны ключ.
4. Insert your new key fully and slowly turn it 180 degrees counter-clockwise.

Diagram illustrating the SmartKey Re-Key process and various security features like pick, bump, and drill resistance.

Інтэграцыя разумнага дома (Z-Wave):

The SmartCode 10 with Z-Wave technology can be integrated into compatible smart home systems like Samsung SmartThings and Wink. This allows for remote access, voice control via Amazon Alexa (through a compatible hub), and inclusion in smart home routines. Refer to your smart home hub's instructions for pairing the deadbolt.

Тэхнічнае абслугоўванне

Regular maintenance ensures the longevity and optimal performance of your Weiser SmartCode 10 deadbolt.

Уборка:

Ачысціце сэнсарны экран і вонкавае пакрыццё мяккай губкайamp тканінай. Пазбягайце выкарыстання абразіўных ачышчальнікаў, растваральнікаў або агрэсіўных хімічных рэчываў, бо яны могуць пашкодзіць пакрыццё і электронныя кампаненты.

Замена батарэі:

When the batteries are low, the lock will provide an audible alert (beeps) and/or a visual indicator (flashing light) during operation. Replace all four AA alkaline batteries promptly to avoid loss of functionality. Always use new, high-quality alkaline batteries.

Агульны догляд:

Ensure the door and frame are properly aligned and the deadbolt operates smoothly without resistance. Misalignment can put undue stress on the lock mechanism.

Ліквідацыю непаладак

If you encounter issues with your SmartCode 10 deadbolt, refer to the common problems and solutions below.

Агульныя праблемы і рашэнні:

• Замак не рэагуе на клавішы:
  • Check batteries. Replace if low or dead.
  • Пераканайцеся, што сэнсарны экран чысты і без смецця.
  • Verify that the door handing process was completed correctly during installation.
• Код карыстальніка не працуе:
  • Ensure the code is entered correctly and completely.
  • Verify the user code is still active and has not been deleted.
  • Confirm the Master Code is set up correctly.
• Deadbolt not extending/retracting fully:
  • Праверце наяўнасць перашкод у дзвярной раме або запорнай пласціне.
  • Ensure the door is properly aligned and not warped.
  • Verify the latch and strike plate are installed correctly and aligned.
• Праблемы з падключэннем Z-Wave:
  • Ensure the lock is within range of your Z-Wave hub.
  • Check your Z-Wave hub's status and network.
  • Attempt to re-pair the lock with your Z-Wave hub according to your hub's instructions.

Скід да заводскіх налад:

If issues persist, a factory reset may be necessary. This will erase all user codes and settings. Refer to the detailed programming guide for your specific model for factory reset instructions.

Тэхнічныя характарыстыкі

Гарантыя і падтрымка

Інфармацыя аб гарантыі:

The Weiser SmartCode 10 Touchscreen Electronic Deadbolt comes with a Пажыццёвая абмежаваная гарантыя. This warranty covers mechanical and finish defects for the lifetime of the product to the original residential user. Electronic components are typically covered for a specific period (details usually found in the full warranty statement). Please retain your proof of purchase.

Падтрымка кліентаў:

For technical assistance, warranty claims, or further information, please visit the official Weiser website or contact their customer support. Contact details are typically available on the product packaging or the manufacturer's webсайт.