Amazon Basics CLL-002

Amazon Basics Class II Cross-Line Laser Level

Model: CLL-002 | Brand: Amazon Basics

Уводзіны

This manual provides essential information for the safe and effective operation of your Amazon Basics Class II Cross-Line Laser Level. Please read these instructions thoroughly before use and retain them for future reference.

Інфармацыя па бяспецы

ПАПЯРЭДЖАННЕ: ЛАЗЕРНЫ ВЫРАБ КЛАСА II

This device emits a Class II laser beam. Avoid direct eye exposure to the laser beam. Do not stare into the beam. Do not intentionally direct the laser beam at others. Use caution when operating the laser level to prevent accidental exposure.

  • Заўсёды карыстайцеся лазерным узроўнем бяспечным чынам.
  • Не спрабуйце мадыфікаваць або разбіраць прыладу.
  • Захоўваць у месцах, недаступных дзецям.
  • Ensure the work area is clear of obstructions and reflective surfaces that could redirect the laser beam.

Змест пакета

  • Amazon Basics Class II Cross-Line Laser Level
  • L-shaped Magnetic Pivoting Base
  • Сумка для пераноскі
  • Кіраўніцтва карыстальніка
Amazon Basics Cross-Line Laser Level with L-shaped magnetic base and carrying pouch
The Amazon Basics Cross-Line Laser Level, shown with its L-shaped magnetic pivoting base and a black carrying pouch.

Прадукт скончаныview

The Amazon Basics Cross-Line Laser Level is designed to project bright horizontal, vertical, or cross-line laser beams for various leveling and alignment tasks. Its compact design and versatile mounting options make it suitable for indoor and outdoor use.

Асноўныя характарыстыкі:

  • Projects horizontal, vertical, and cross-line green laser beams.
  • 59-foot (708 inch) range for indoor and outdoor applications.
  • Automatic self-leveling mode for quick and accurate setup.
  • Manual mode for locking the laser at desired angles.
  • Durable plastic and metal construction with a soft rubber exterior for enhanced grip.
  • Battery-operated (AA batteries, not included).
Назад view of the Amazon Basics Cross-Line Laser Level showing product information label and battery compartment
Тыл view of the laser level, displaying the product label and the battery compartment latch.
Dimensions of the Amazon Basics Cross-Line Laser Level: 2.8 inches L x 2.4 inches W x 3.3 inches H
Diagram illustrating the compact dimensions of the laser level: 2.8 inches (7.1 cm) length, 2.4 inches (6.1 cm) width, and 3.3 inches (8.3 cm) height.

Настройка

1. Устаноўка батарэі

  1. Locate the battery compartment on the bottom of the laser level.
  2. Адкрыйце крышку батарэйнага адсека.
  3. Insert two AA batteries (not included), ensuring correct polarity (+/-).
  4. Надзейна зачыніце крышку батарэйнага адсека.

2. Мантаж прылады

The laser level can be used freestanding or mounted using the included L-shaped magnetic pivoting base. The base features a 1/4-inch screw thread for attachment to the laser level and magnets for securing to metallic surfaces. It is also compatible with standard tripods (not included).

Amazon Basics Cross-Line Laser Level with L-shaped magnetic base attached
The laser level with the L-shaped magnetic pivoting base attached to its bottom, ready for use.

Інструкцыя па эксплуатацыі

1. Уключэнне/выключэнне харчавання

To turn the device on, slide the lock switch on the side to the unlocked position. To turn off, slide the switch to the locked position.

2. Automatic (Self-Leveling) Mode

When the lock switch is in the unlocked position, the laser level will automatically self-level within 4 degrees. If the device is outside this range, the laser lines will blink to indicate it is not level. Adjust the device's position until the laser lines become solid, indicating a level projection.

Illustration of the laser level in automatic mode, projecting a level cross-line on a wall with a picture frame
In Automatic mode, the laser level self-levels to project accurate horizontal and vertical lines, ideal for hanging items like picture frames.

3. Ручны рэжым

To use the laser at a specific angle (e.g., for stair railings), slide the lock switch to the locked position. The laser lines will remain fixed at the angle you set. The lines may blink in manual mode to indicate that the self-leveling feature is disengaged.

Illustration of the laser level in manual mode, projecting an angled cross-line on a staircase
In Manual mode, the laser level can project lines at any desired angle, useful for tasks like installing stair railings.

4. Laser Line Selection

Press the power button on top of the device to cycle through different laser line modes: horizontal line, vertical line, or cross-line (both horizontal and vertical).

A green cross-line laser projected onto a wooden surface, with a hand marking a point
The laser level projecting a clear green cross-line onto a wooden surface, demonstrating its use for precise marking.
A person kneeling, using the laser level to project a horizontal green line on a wall during construction
A user demonstrating the laser level's application in a construction setting, projecting a horizontal line for alignment.

Тэхнічнае абслугоўванне

  • Keep the laser level clean and free of dust and debris. Use a soft, dry cloth for cleaning.
  • Store the device in its carrying pouch in a cool, dry place when not in use.
  • Выміце батарэйкі, калі прылада не будзе выкарыстоўвацца працяглы час, каб прадухіліць іх уцечку.
  • Не апускайце прыладу ў ваду і не падвяргайце яе ўздзеянню экстрэмальных тэмператур.

Ліквідацыю непаладак

праблемаМагчымая прычынаРашэнне
Лазерныя лініі міргаюць.In Automatic mode, the device is not level (outside 4-degree range). In Manual mode, blinking is normal.In Automatic mode, adjust the device's position until the lines become solid. No action needed in Manual mode.
No laser lines.Batteries are dead or incorrectly installed. Device is off.Check battery polarity and replace if necessary. Ensure the lock switch is in the unlocked position.
Laser lines are dim.Low battery power. Bright ambient light.Replace batteries. Use the laser level in areas with less ambient light for better visibility.

Тэхнічныя характарыстыкі

  • Марка: Асновы Amazon
  • Нумар мадэлі: CLL-002
  • Лазерны клас: ІІ клас
  • Тып лазера: Green Cross-Line Laser
  • дыяпазон: 59 фут / 708 цаляў
  • Дыяпазон самовыравнивания: ±4 градуса
  • матэрыял: 70% пластык, 30% метал
  • колер: Жоўты/Чорны
  • Крыніца харчавання: 2 батарэйкі АА (не ўключаны)
  • Памеры прадукту: 2.8" Д x 2.4" Ш x 3.3" У
  • Вага прадмета: 12 унцыі (0.34 кілаграма)
  • Рэжым працы: Аўтаматычны / ручной

Гарантыя і падтрымка

Каб атрымаць інфармацыю аб гарантыі або падтрымку кліентаў, звярніцеся да афіцыйнага прадстаўніка Amazon Basics. webсайт або звярніцеся непасрэдна ў службу падтрымкі кліентаў Amazon. Захоўвайце чэк аб куплі для прэтэнзій па гарантыі.

© 2026 Amazon Basics. Усе правы абаронены.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.