SKYSHL SS322T-2G1 Single Mode OTDR Fiber Tester Instruction Manual

1. Прадукт скончыўсяview

The SKYSHL SS322T-2G1 is a high-performance Single Mode Optical Time Domain Reflectometer (OTDR) designed for comprehensive fiber optic network testing. It integrates multiple essential functions including OTDR, Optical Power Meter (OPM), Optical Light Source (OLS), Visual Fault Locator (VFL), Event Map, and APP Module connectivity. With 1310nm and 1550nm wavelengths and a dynamic range of 49dB, it is capable of testing distances up to 280km (174 miles). The device features a 7-inch touch screen for intuitive operation and supports various connector types, making it a versatile tool for fiber optic professionals.

Малюнак 1: Спераду view of the SKYSHL SS322T-2G1 OTDR Fiber Tester, showcasing its 7-inch touch screen interface.

2. Інфармацыя па бяспецы

Please read all safety instructions carefully before operating the device. Failure to follow these instructions may result in injury or damage to the device.

• Лазерная бяспека: This device uses lasers. Do not look directly into the optical output ports when the device is active. Laser radiation can cause severe eye damage.
• Крыніца харчавання: Use only the specified power adapter and battery. Incorrect power sources can damage the device or cause fire.
• Апрацоўка: Асцярожна звяртайцеся з прыладай. Пазбягайце падзення або моцных удараў.
• Асяроддзе: Do not expose the device to extreme temperatures, humidity, or corrosive environments.
• Тэхнічнае абслугоўванне: Refer to the maintenance section for cleaning and care. Do not attempt to disassemble or repair the device yourself.

3. Змесціва ўпакоўкі

Праверце наяўнасць усіх прадметаў у камплекце:

• 1x OTDR Set (main unit)
• 2x Fiber Optic Patch Cords (1*SM FC/UPC-FC/UPC + 1*SM FC/UPC-FC/APC)
• Various Connectors (FC-SC, FC-ST, FC-FC, FC-LC)
• Кабель USB
• Адаптар сілкавання
• Кіраўніцтва карыстальніка
• Ачышчальныя тампоны
• Сумка для пераноскі

Figure 2: Included accessories and the main unit of the SKYSHL SS322T-2G1 OTDR Fiber Tester.

4. Асноўныя магчымасці

• Dual Wavelengths & High Dynamic Range: 1310nm+1550nm with 49dB+49dB dynamic range, supporting test distances up to 280km.
• Multi-Function Integration: Combines OTDR, Optical Power Meter (OPM), Optical Light Source (OLS), and Visual Fault Locator (VFL) in one handheld device.
• Short Dead Zones: Event Dead Zone (EDZ) of 0.5m (typical for SM) and Attenuation Dead Zone (ADZ) of 3.0m (typical for SM) for precise fault detection.
• Інтэлектуальная праца: Features automatic testing, scheduled testing, and event mapping for simplified use.
• Smart APP & PC Software: Supports connectivity to Android phones/tablets and Windows PCs for real-time data viewing, sharing, analysis, and saving.
• Broad Connector Compatibility: Includes adapters for SC/UPC, ST/UPC, FC/UPC, LC/UPC, SC/APC, ST/APC, FC/APC, and LC/APC.
• Кіраванне дадзенымі: Allows saving test traces to SD card and USB flash disk, supports EI&SOR format, one-click screenshot, and one-click PDF generation.

5. Device Layout and Interfaces

Familiarize yourself with the physical components and connection ports of the SS322T-2G1.

Малюнак 3: Верх view of the device showing the VFL, OTDR, and OPM ports, along with USB and Ethernet ports.

• Аптычныя парты: Dedicated ports for OTDR, VFL, and OPM functions. Ensure correct fiber connection to the appropriate port.
• Парты USB: Type A and Type B USB ports for connecting USB disks, external devices, or connecting to a computer.
• Слот Micro SD: Для пашырэння ёмістасці захоўвання.
• Ethernet порт: For network connectivity and functions like PING test.
• Кнопка харчавання: Located on the front panel for turning the device on/off.
• Кнопкі навігацыі: Arrow keys and OK button for menu navigation and selection.
• 7-цалевы сэнсарны экран: Primary interface for all operations and data display.

6. Настройка

6.1 Першапачатковае ўключэнне

1. Націсніце і ўтрымлівайце кнопку харчавання, пакуль прылада не ўключыцца.
2. The device will display the boot screen and then the main menu.

6.2 Налады мовы і часу

To configure language and time:

1. From the main menu, tap on the сістэма значок.
2. Перайсці да Агульныя налады.
3. Выберыце мова and choose 'English'.
4. Адрэгулюйце Час налады па меры неабходнасці.

6.3 Network Settings (Optional)

To connect to a Wi-Fi network for APP module functionality:

1. Ад ст сістэма menu, tap on Налады сеткі.
2. Enable Wi-Fi and scan for available networks.
3. Select your desired network and enter the password to connect.

Figure 4: The network settings interface on the SS322T-2G1, showing options for IP, Mask, Gateway, and Wi-Fi connection.

7. Інструкцыя па эксплуатацыі

7.1 Тэсціраванне рэфлексаметрам

The OTDR function is used to characterize optical fibers. Ensure the fiber under test is clean and properly connected.

1. From the main menu, tap on the OTDR значок.
2. Connect the fiber to the OTDR port. Ensure the connector type matches (UPC/APC). Use appropriate adapters if necessary.
3. Націсніце Настройка to configure test parameters.
4. Выберыце жаданае Даўжыня хвалі (1310nm or 1550nm).
5. Выберыце Рэжым (Auto-Test for automatic parameter selection or Manual for custom settings).
6. Адрэгулюйце сярэдні Час (averaging time), Дыяпазон, і Шырыня імпульсу if in Manual mode.
7. Націсніце Тэст or Сярэдні каб пачаць вымярэнне.
8. The OTDR trace will be displayed on the screen, showing events like splices, connectors, and fiber ends.

Малюнак 5: Выпample of 1310nm and 1550nm graphics analysis on the OTDR screen, detailing events and their characteristics.

7.2 Вымяральнік аптычнай магутнасці (OPM)

The OPM measures the optical power of a fiber optic signal.

1. From the main menu, tap on the OPM значок.
2. Падключыце валакно да порта OPM.
3. Select the desired wavelength (850nm to 1650nm).
4. The screen will display the measured optical power in dBm or mW.

7.3 Аптычная крыніца святла (OLS)

The OLS provides a stable light source for various fiber optic tests.

1. From the main menu, tap on the OLS значок.
2. Падключыце валакно да порта OLS.
3. Select the desired wavelength (1310nm or 1550nm).
4. Choose the output mode (CW, 270Hz, 1kHz, 2kHz).
5. Націсніце Пачаць to activate the light source.

7.4 Візуальны лакатар няспраўнасцей (VFL)

The VFL emits a visible red laser to quickly locate breaks, bends, and faulty connectors in fiber optic cables.

1. From the main menu, tap on the VFL значок.
2. Падключыце валакно да порта VFL.
3. Націсніце Пачаць to activate the VFL.
4. Observe the fiber for any visible red light leakage, indicating a fault.

7.5 Карта падзей

The Event Map function provides a simplified, graphical representation of the fiber link, making it easier to identify and locate events without detailed trace analysis.

1. After performing an OTDR test, tap on the Карта падзей icon (if available in your UI version) or navigate to the analysis section.
2. The map will display icons representing different events (e.g., splices, connectors, fiber ends) and their distances.

Figure 6: Diagram illustrating various OTDR test event types such as splicing points, adapters, fractures, and fiber ends, as displayed on the test curve.

7.6 Кіраванне дадзенымі

The SS322T-2G1 allows for efficient management of test data.

1. Захаванне Files: After a test, tap Захаваць to store the trace data. You can choose to save to internal memory, SD card, or a connected USB disk.
2. Загрузка Files: Націсніце File to browse and load previously saved test files.
3. Перадача Files: Use the USB Type A port to connect a USB flash drive for easy transfer of files between the device and external storage.
4. Стварэнне PDF-справаздачы: The device supports one-click PDF report generation for professional documentation of test results.

7.7 APP Module Connectivity

The Smart APP module allows for enhanced functionality and remote interaction with the device.

1. Ensure the device is connected to Wi-Fi (refer to Section 6.3).
2. Install the SKYSHL APP on your Android device (currently Android only) or Windows PC.
3. Follow the APP's instructions to connect to the SS322T-2G1.
4. Вы можаце зараз view, share, analyze, and save test data in real-time from your connected device.

8. Тэхнічнае абслугоўванне

Proper maintenance ensures the longevity and accuracy of your SS322T-2G1 OTDR.

• Cleaning Optical Ports: Regularly clean the optical ports and fiber connectors using the provided cleaning swabs and appropriate fiber optic cleaning solutions. Dust and debris can significantly affect measurement accuracy.
• Ачыстка экрана: Use a soft, lint-free cloth to clean the touch screen. Avoid abrasive materials or harsh chemicals.
• Сыход за батарэяй: Charge the device regularly. For long-term storage, ensure the battery is partially charged (around 50%) and store in a cool, dry place. Avoid fully discharging the battery for extended periods.
• Абнаўленні праграмнага забеспячэння: Праверце вытворцы website periodically for software updates to ensure optimal performance and access to new features.
• захоўванне: When not in use, store the device in its carrying bag to protect it from dust, moisture, and physical damage.

9. Выпраўленне непаладак

This section addresses common issues you might encounter with your SS322T-2G1 OTDR.

10. Тэхнічныя характарыстыкі

11. Гарантыя і падтрымка

SKYSHL provides a 3-year free replacement warranty for the SS322T-2G1 OTDR Fiber Tester, along with lifetime maintenance. For any technical assistance, troubleshooting, or warranty claims, please contact SKYSHL customer support. A professional technical support team is available 24 hours a day to assist you.

For further information, please visit the official SKYSHL webсайт або звярніцеся да кантактнай інфармацыі, указанай на ўпакоўцы прадукту.