eSynic 16-inch Digital Angle Finder Protractor User Manual

1. Уводзіны

The eSynic 16-inch Digital Angle Finder Protractor is a versatile tool designed for precise angle measurement in various applications. It features a digital LCD display, magnetic base, and is built to withstand challenging environments with its IP54 waterproof and dust-proof rating. This manual provides instructions for proper setup, operation, and maintenance of your device.

2. Змесціва ўпакоўкі

• 1 x eSynic 16-inch Digital Angle Finder Protractor
• 2 батарэйкі тыпу AAA (папярэдне ўсталяваныя або ўключаны асобна)
• 1 х Кіраўніцтва карыстальніка

3. Прадукт скончыўсяview

Familiarize yourself with the components and controls of your digital angle finder.

Малюнак 3.1: Product Diagram. This image illustrates the key components including the Vertical Bubble, Horizontal Bubble, Battery Compartment, On/Off Button, H/L Button, M/B Button, Zero Button, LCD Display, and Hanging Hole.

• Кнопка ўключэння/выключэння: Уключае або выключае прыладу.
• Кнопка нуля: Used to set the current position as the zero reference for relative measurements.
• Кнопка M/B: Short press to switch measurement units (degrees, %, slope, in/ft). Long press to activate/deactivate the audible alarm.
• H/L Button: Short press to hold the current measurement on the display. Long press to turn the backlight on or off.
• ВК-дысплей: Shows angle readings, measurement units, and battery status.
• Vertical & Horizontal Bubbles: Traditional spirit levels for quick visual checks.
• Магнітная база: Allows the tool to attach to metallic surfaces for hands-free operation.

4. Настройка

4.1. Устаноўка батарэі

1. Знайдзіце вечка батарэйнага адсека на задняй панэлі прылады.
2. Зрушыце або адшчэпіце вечка, каб адкрыць.
3. Устаўце дзве батарэйкі тыпу ААА, сочачы за правільнай палярнасцю (+/-), як паказана ўнутры адсека.
4. Надзейна зачыніце крышку батарэйнага адсека.

4.2. Уключэнне / выключэнне харчавання

Націсніце Уключэнне/Выключэнне button once to turn the device on. Press and hold the Уключэнне/Выключэнне кнопку на працягу некалькіх секунд, каб выключыць яго.

5. Аперацыя

5.1. Basic Angle Measurement

Place the base of the angle finder on the surface you wish to measure. The LCD display will show the angle relative to the horizontal plane. For best accuracy, ensure the tool is stable.

5.2. Switching Measurement Units/Modes

The device supports 5 setting modes: degrees (°), percentage (%), slope, and in/ft (fractions/decimal).

1. With the device powered on, short press the М/Б кнопка.
2. Each short press will cycle through the available measurement units on the LCD display.

Малюнак 5.1: Five Measurement Modes Display. This image demonstrates the various units available on the LCD, including mm/m, degrees, percentage, and two formats for in/ft.

5.3. Relative Measurement Mode (Zeroing)

To measure the angle between two surfaces, use the relative measurement mode:

1. Place the angle finder on the first surface.
2. Націсніце Нуль button. The display will show "0.00°" and an indicator for relative mode.
3. Move the angle finder to the second surface. The display will now show the angle difference between the first and second surfaces.
4. To exit relative measurement mode, press the Нуль кнопку зноў.

5.4. Функцыя ўтрымання дадзеных

To temporarily freeze the current measurement on the display:

1. Кароткае націсканне H/L button. A "HOLD" indicator will appear on the display.
2. The displayed value will remain fixed even if the angle finder is moved.
3. Кароткае націсканне H/L зноў націсніце кнопку, каб адмяніць блакіроўку і аднавіць вымярэнне ў рэжыме рэальнага часу.

5.5. Кіраванне падсветкай

ВК-дысплей мае падсветку для паляпшэння бачнасці ў цёмных умовах.

Доўгі націск H/L button to toggle the backlight on or off.

5.6. Audible Alarm Function

The device can emit an audible alarm that increases in frequency as the measurement approaches 0° or 90°.

Доўгі націск М/Б button to activate or deactivate the audible alarm.

5.7. Using the Magnetic Base

The integrated magnetic base allows for convenient, hands-free operation on ferrous metal surfaces.

Малюнак 5.2: Magnetic Base in Use. This image shows the angle finder securely attached to a vertical metal surface, demonstrating its magnetic capability.

Simply place the magnetic base firmly against a metallic surface. This frees your hands for other tasks, such as holding materials or operating tools.

5.8. IP54 Waterproof and Dust-proof Rating

The IP54 rating indicates that the device is protected from dust ingress sufficient to prevent interference with the satisfactory operation of the equipment and from water spray from any direction.

Малюнак 5.3: IP54 Water Resistance. This image depicts the angle finder in an environment with splashing water, highlighting its IP54 waterproof and dust-proof design suitable for moist conditions.

While resistant to splashes and dust, it is not designed for immersion in water. Avoid prolonged exposure to heavy rain or submersion.

6. Тэхнічнае абслугоўванне

6.1. Уборка

Працярыце прыладу мяккай, damp cloth. Do not use abrasive cleaners, solvents, or immerse the device in water. Ensure the LCD display is clean for clear readings.

6.2. Захоўванне

When not in use, store the angle finder in a dry, cool place, away from direct sunlight and extreme temperatures. If storing for extended periods, remove the batteries to prevent leakage.

6.3. Замена батарэі

When the battery indicator on the LCD shows low power, replace both AAA batteries promptly to ensure accurate operation. Follow the battery installation steps in Section 4.1.

7. Выпраўленне непаладак

• Прылада не ўключаецца:
  • Праверце, ці правільна ўсталяваныя батарэйкі з захаваннем палярнасці.
  • Заменіце на новыя батарэйкі ААА.
• Няправільныя паказанні:
  • Ensure the measurement surface is clean and flat.
  • Perform a zero calibration on a known flat surface.
  • Check for any physical damage to the device.
• LCD display is dim or flickering:
  • Заменіце батарэі.
  • Ensure the backlight is not set to a low brightness (if applicable) or is turned on.

Калі праблемы не знікнуць, звярніцеся ў службу падтрымкі кліентаў.

8. Тэхнічныя характарыстыкі

Малюнак 8.1: Product Dimensions. The angle finder measures approximately 40cm (15.75 inches) in length, 5cm (1.97 inches) in height, and 3.8cm (1.5 inches) in width.

9. Гарантыя і падтрымка

eSynic products are manufactured to high-quality standards. For information regarding warranty coverage and terms, please refer to the documentation included with your purchase or visit the official eSynic webсайт.

For technical support, troubleshooting assistance, or any inquiries, please contact eSynic customer service through the retailer where the product was purchased or via the contact information provided on the eSynic brand store page.