1. Уводзіны
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Gravity Warzone WZ10D4-1 10-inch car audio shallow subwoofers. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product. These subwoofers are designed for car audio applications, featuring a dual 4-ohm voice coil configuration for flexible wiring options.

Figure 1.1: Gravity Warzone WZ10D4-1 10-inch shallow subwoofer, showing the front cone and rear terminal connections.
2. Змесціва ўпакоўкі
Перад тым, як працягнуць усталёўку, пераканайцеся, што ўсе элементы ёсць у камплекце.
- 2x Gravity Warzone WZ10D4 Subwoofers
3. Інфармацыя па бяспецы
Заўсёды выконвайце наступныя меры бяспекі падчас усталёўкі і эксплуатацыі:
- Disconnect the vehicle's battery before beginning any electrical work to prevent short circuits.
- Забяспечце належную вентыляцыю сабвуфера і ampLifier для прадухілення перагрэву.
- Use appropriate gauge wiring for power, ground, and speaker connections to handle the current and power output.
- Avoid installing the subwoofer in locations where it may be exposed to moisture or extreme temperatures.
- Securely mount the subwoofer to prevent movement during vehicle operation, which could cause damage or injury.
- Prolonged exposure to high sound pressure levels can cause permanent hearing damage. Adjust volume levels responsibly.
4. Настройка і ўстаноўка
Proper installation is crucial for optimal performance and longevity of your subwoofers. If you are unsure about any part of the installation process, consult a professional car audio installer.
4.1 Патрабаванні да корпуса
These subwoofers are designed for use in sealed or ported enclosures. Refer to the subwoofer's technical specifications for recommended enclosure volumes. Ensure the enclosure is robust and sealed properly to prevent air leaks.
4.2 Мантаж
Mount the subwoofer securely within the chosen enclosure using appropriate screws. Ensure there is no interference with the cone's movement and that the subwoofer gasket creates a tight seal with the enclosure.
4.3 Правадныя злучэнні
The WZ10D4-1 features a dual 4-ohm voice coil configuration. This allows for various wiring options to achieve different impedance loads at your ampвыратавальнік. Распаўсюджаныя канфігурацыі ўключаюць:
- Нагрузка 1 Ом: Wire both voice coils in parallel.
- Нагрузка 2 Ом: Wire each subwoofer's voice coils in series (8 ohms per sub), then wire the two subwoofers in parallel (4 ohms total). Or, wire each subwoofer's voice coils in parallel (2 ohms per sub), then wire the two subwoofers in series (4 ohms total). For a single subwoofer, wire the two 4-ohm voice coils in parallel to achieve a 2-ohm load.
- Нагрузка 8 Ом: Wire both voice coils in series.
Always match the final impedance load to your amplifier's stable operating range. Incorrect wiring can damage your amplifier or subwoofers.

Малюнак 4.1: Буйны план view of the subwoofer's push terminals for secure wire connections.
4.4 Ampліфцёр Выбар
Выберыце amplifier that can provide sufficient RMS power within the recommended range for the WZ10D4-1 subwoofers (400 watts RMS each). Ensure the amplifier is stable at the impedance load presented by your wiring configuration.
5. Інструкцыя па эксплуатацыі
Once installed, operate your subwoofers by following these guidelines:
- Першапачатковае ўключэнне: After installation, turn on your car audio system at a low volume. Gradually increase the volume and check for proper operation and sound quality.
- Налада ўзмацнення: Adjust the gain control on your amplifier carefully. Do not use the gain control as a volume knob. Set it to match the output voltage of your head unit to prevent distortion.
- Налады кросовера: Выкарыстоўвайце нізкачастотны фільтр (ФНЧ) на вашым amplifier or head unit to send only low frequencies to the subwoofers. A common starting point is 80-100 Hz.
- Перыяд абкаткі: Allow a break-in period of approximately 20-30 hours of normal listening before operating the subwoofers at their maximum potential. This allows the suspension components to loosen up, improving performance.
6. Тэхнічнае абслугоўванне
Minimal maintenance is required for your subwoofers to ensure long-term performance:
- Уборка: Перыядычна працірайце дыфузар і аправу сабвуфера мяккай сухой тканінай, каб выдаліць пыл і смецце. Пазбягайце выкарыстання агрэсіўных хімікатаў або празмернай вільгаці.
- агляд: Regularly inspect the wiring connections for tightness and corrosion. Check the subwoofer surround for any signs of damage or deterioration.
- Фактары навакольнага асяроддзя: Абараняйце сабвуферы ад прамых сонечных прамянёў, экстрэмальных тэмператур і вільгаці, якія з часам могуць пашкодзіць матэрыялы.
7. Выпраўленне непаладак
If you experience issues with your subwoofers, refer to the following common troubleshooting steps:
- Няма гуку:
- Check all power, ground, remote, and speaker connections for proper contact.
- Праверце amplifier is powered on (check power indicator light).
- Пераканайцеся, што галоўная прылада пасылае гукавы сігнал.
- Праверыць ampзасцерагальнікі лівога паліўнага рухавіка і засцерагальнікі аўтамабіля.
- Скажоны гук:
- Паменшыць ampліфіер атрымаць.
- Check for proper crossover settings; ensure only low frequencies are sent to the subwoofer.
- Verify the impedance load matches the amplifier's stable operating range.
- Ensure the subwoofer is not over-powered or under-powered.
- Слабы бас:
- Праверыць amplifier gain and subwoofer level settings on the head unit.
- Verify correct wiring polarity (+ to + and - to -).
- Ensure the enclosure is sealed properly (if applicable) and of the correct volume.
- Adjust crossover frequency and bass boost settings.
If problems persist after performing these checks, contact customer support or a qualified technician.
8. Тэхнічныя характарыстыкі
| Асаблівасць | Спецыфікацыя |
|---|---|
| Назва мадэлі | WZ10D4-1 |
| Тып дынаміка | Сабвуфер |
| Памер дынаміка | 10 цалі |
| Канфігурацыя галасавой шпулькі | Двайны 4 Ом |
| Peak Power (each) | 1200 ват |
| RMS Power (each) | 400 ват |
| Матэрыял конусу | Competition Grade Carbon Fiber |
| Аб'ёмны матэрыял | Treated Rubber, High Roll Foam |
| Памер гукавой шпулькі | 2.5 цалі |
| Структура магніта | Ферытавы |
| Сістэма астуджэння | Advanced Air Flow |
| АЧХ | 40 - 500 Гц |
| Адчувальнасць | 86 дБ |
| Рэкамендуемае выкарыстанне | In-car Audio |
| Тып мацавання | Аўтамабільнае мацаванне |
9. Інфармацыя аб гарантыі
Gravity products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Gravity webсайт. Захоўвайце пацвярджэнне пакупкі для любых гарантыйных прэтэнзій.
10. Падтрымка
For technical assistance, troubleshooting beyond this manual, or customer service inquiries, please contact Gravity customer support through their official webсайт або кантактную інфармацыю, прадастаўленую пры пакупцы.