Кіраўніцтва карыстальніка для тэрмапрэса VIVOHOME 5-у-1 (12x15 цаляў) і міні-тэрмапрэса ў форме сэрца

Уводзіны

This manual provides detailed instructions for the safe and efficient operation of your VIVOHOME 5-in-1 Heat Press Machine and Mini Heart-Shaped Heat Press. These machines are designed for applying transfers, letters, numbers, and images onto various materials such as T-shirts, caps, ceramic plates, mugs, and other fabric items. Please read this manual thoroughly before initial use to ensure proper setup, operation, and maintenance.

Важныя інструкцыі па бяспецы

• Always operate the heat press on a stable, heat-resistant surface.
• Keep hands and fingers clear of the heating platen during operation to prevent burns.
• Do not touch the heating elements directly. Use heat-resistant gloves when handling hot materials or components.
• Ensure the machine is properly grounded to prevent electrical shock.
• Адключайце прыладу ад электрычнай разеткі, калі яна не выкарыстоўваецца, а таксама перад чысткай і тэхнічным абслугоўваннем.
• Не выкарыстоўвайце машыну ў вільготным абоamp умовы.
• Трымайце дзяцей і хатніх жывёл далей ад машыны падчас працы.
• Ніколі не пакідайце машыну без нагляду, калі яна ўключана або працуе.
• If any damage is observed, discontinue use immediately and contact customer support.

Змест пакета

Пры распакаванні пераканайцеся, што ўсе кампаненты наяўныя:

• VIVOHOME 5-in-1 Heat Press Machine (Main Unit)
• Platen Press (T-shirt press)
• Hat/Cap Press Attachment
• Mug Press Attachment
• Plate Press Attachments (2 sizes)
• Mini Heart-Shaped Heat Press Machine
• Шнуры харчавання
• Тэрмаўстойлівыя пальчаткі
• Кіраўніцтва карыстальніка (гэты дакумент)
• Small spray bottle and silicone pad (for mini press)

Image: Main 5-in-1 heat press machine with its included attachments for mugs, hats, and plates, along with heat-resistant gloves and tools.

Image: The mini heart-shaped heat press machine, its charging base, a small spray bottle, and a silicone pad.

Ўстаноўка і зборка

5-in-1 Heat Press Machine

1. Распакаванне: Акуратна дастаньце ўсе кампаненты з упакоўкі.
2. Размяшчэнне: Place the main unit on a sturdy, level, and heat-resistant surface. Ensure adequate clearance around the machine for ventilation and safe operation.
3. Platen Installation: The flat platen press is typically pre-installed. To change attachments (e.g., mug press, hat press, plate press), locate the securing screws or levers, loosen them, remove the current attachment, and install the desired one. Ensure it is securely fastened before use.
4. Падключэнне сілкавання: Падключыце шнур харчавання да прылады, а затым да заземленай электрычнай разеткі.

Image: A user preparing to operate the 5-in-1 heat press machine, demonstrating its swing-away design.

Mini Heart-Shaped Heat Press Machine

1. Зарадка: Place the mini heat press onto its charging base. Connect the base to a power outlet. The indicator light will show charging status.
2. Падрыхтоўка: Ensure the silicone pad is placed on a flat, heat-resistant surface where you intend to work.

Інструкцыя па эксплуатацыі

5-in-1 Heat Press Machine Operation

This machine features a digital control panel for precise temperature and time settings. It offers both simple and expert modes.

1. Уключэнне: Уключыце прыладу ў сетку і націсніце кнопку харчавання.
2. Выбар рэжыму:
   • Просты рэжым: Offers 4 preset temperature levels. Time can be set between 10 to 120 seconds.
   • Экспертны рэжым: Allows custom temperature settings from 284°F to 410°F (140°C to 210°C) and time settings from 10 to 999 seconds. Refer to the specific transfer material instructions for recommended settings.
3. Ўстаноўка тэмпературы і часу: Use the control panel buttons to adjust the desired temperature and time. The display will show the current temperature and countdown.
4. Папярэдні нагрэў: Allow the machine to preheat until it reaches the set temperature. An audible alert may sound when ready.
5. Размяшчэнне матэрыялу:
   • Для T-shirts/Flat Items: Place the garment on the platen, smooth out wrinkles, and position your transfer.
   • Для Гурткі: Insert the mug into the mug press attachment, ensuring the transfer is securely wrapped.
   • Для Hats/Caps: Position the hat on the cap press attachment.
   • Для Талеркі: Place the plate into the plate press attachment.
6. Прыкладанне ціску: Lower the heating platen onto the item. Adjust the pressure knob to achieve the required pressure for your transfer material.
7. Націсканне: Once the timer counts down, lift the heating platen. Carefully remove the item using heat-resistant gloves.
8. Выключэнне: Turn off the machine and unplug it after use.

Image: Illustration of the machine's versatility, showing how different attachments allow for pressing on mugs, hats, and plates, in addition to flat items.

Image: A visual representation of the upgraded heat tubes, highlighting the "Double Heating Effection" for more even and efficient heat distribution.

Mini Heart-Shaped Heat Press Operation

The mini heat press is ideal for smaller projects and hard-to-reach areas.

1. Уключэнне: Press and hold the power button to turn on the mini heat press.
2. Налада тэмпературы: Press the temperature button to cycle through the preset temperature levels. Refer to your transfer material's instructions for the appropriate setting.
3. Час застывання: Press the time button to adjust the pressing duration.
4. Папярэдні нагрэў: Allow the mini press to heat up to the selected temperature. The display will show the current temperature.
5. Размяшчэнне: Place your garment or item on the silicone pad. Position your transfer.
6. Націсканне: Gently press the heated plate of the mini press onto the transfer with even pressure. Move it slowly over the entire transfer area if needed for larger designs.
7. Астуджэнне: After the set time, lift the mini press. Allow the item to cool before peeling the transfer (if required by the transfer type).
8. Выключэнне: Press and hold the power button to turn off the mini heat press. Return it to its charging base.

Image: A user demonstrating the compact size and ease of use of the mini heart-shaped heat press on a garment.

Выява: Падрабязная view of the mini heat press's heating platform, emphasizing its smooth chromium electroplating and efficient heating capabilities.

Image: The control panel of the mini heat press, illustrating the functions of its buttons for power, time, and temperature settings.

Тэхнічнае абслугоўванне

• Уборка: Ensure both machines are unplugged and completely cooled before cleaning. Use a soft, damp cloth to wipe down exterior surfaces. For the heating platens, use a non-abrasive cleaner specifically designed for heat press platens if residue builds up. Do not use harsh chemicals or abrasive materials.
• захоўванне: Store the machines in a dry, dust-free environment when not in use. Keep attachments organized and protected.
• агляд: Periodically inspect power cords for any signs of damage. Check all connections and moving parts for proper function.

Ліквідацыю непаладак

Тэхнічныя характарыстыкі

• 5-in-1 Heat Press:
  • Main Platen Size: 12 x 15 inches (30 x 38 cm)
  • Temperature Range: 284°F - 410°F (140°C - 210°C)
  • Time Range: 10 - 999 seconds
  • Power Input: Standard 110V/60Hz (typical for US market)
  • Ватtage: Approximately 1000-1200W (inferred)
  • Attachments: Flat platen, mug press, hat press, 2 plate presses
• Mini Heart-Shaped Heat Press:
  • Transfer Area: Approximately 3.5 x 2.3 inches (9 x 6 cm)
  • Temperature Levels: Multiple preset levels (e.g., Low, Medium, High)
  • Power Input: Rechargeable (via charging base)
• ASIN: B092MBM56Q
• Дата першай даступнасці: 15 красавіка 2021 г

Гарантыя і падтрымка

VIVOHOME products are designed for quality and reliability. For warranty information, technical support, or replacement parts, please contact VIVOHOME customer service. Keep your purchase receipt as proof of purchase for warranty claims.

For further assistance, please visit the official VIVOHOME webсайт або звярніцеся да іх каналаў падтрымкі кліентаў.

VIVOHOME Store Link: VIVOHOME Official Store on Amazon