CycevSun 2x4 LED Flat Panel Light User Manual

1. Інфармацыя па бяспецы

Калі ласка, прачытайце і зразумейце ўсе інструкцыі перад пачаткам усталёўкі. Невыкананне гэтых інструкцый можа прывесці да паражэння электрычным токам, пажару або іншых небяспек, якія могуць выклікаць пашкоджанне маёмасці або траўмы.

• ПАПЯРЭДЖАННЕ: Ensure power is OFF at the circuit breaker before installing or servicing the fixture.
• ПАПЯРЭДЖАННЕ: Use only 0-10V low voltage dimmers or wall switches. This fixture is not compatible with 120V triac dimmers.
• Уся праводка павінна адпавядаць нацыянальным і мясцовым электрычным нормам. Калі вы не ўпэўненыя ў праводцы, звярніцеся да кваліфікаванага электрыка.
• Do not modify the fixture or its components.
• Падыходзіць толькі для выкарыстання ў памяшканні.

2. Прадукт скончыўсяview

The CycevSun 2x4 LED Flat Panel Light is designed for various indoor applications, offering adjustable lighting options and efficient performance.

Асноўныя характарыстыкі:

• Selectable Color Temperature: Choose between 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight) using a slide switch.
• Ватtage: Adjust power consumption to 30W, 40W, or 50W via a slide switch.
• Рэгуляванне яркасці 0-10 В: Compatible with 0-10V dimming systems for smooth brightness control from 100% down to 0%.
• Трывалая канструкцыя: Features a strong aluminum frame and PMMA lenses designed to resist yellowing over time.
• Сертыфікаты: ETL and FCC approved for safety and reliability.

Што ў скрынцы:

• CycevSun 2x4 LED Flat Panel Light(s)
• Драцяныя гайкі

3. Настройка і ўстаноўка

This LED panel light supports three primary installation methods: Drop Ceiling, Surface Mount, and Suspended Mount. Surface mount and suspended mount kits are sold separately.

Installation Methods Overview:

Drop Ceiling Installation Steps:

1. Prepare the Ceiling Grid: Identify the empty grid space where the panel light will be installed.
2. Размяшчэнне панэлі: Tilt the LED panel light and raise it up into the empty grid space. Carefully lower it until it rests securely on the grid.
3. Secure with Grid Clips: Ensure the integrated grid clips on the back of the panel catch onto the tee-grid bars for a stable installation.
4. Адсек праводкі доступу: Remove one conduit knock-out from the driver's junction box using a screwdriver or punch tool.
5. Падключэнне правадоў:
   • Connect the black wire from the fixture to the black (live) wire from the power supply using a wire nut.
   • Connect the white wire from the fixture to the white (neutral) wire from the power supply using a wire nut.
   • Connect the green (ground) wire from the fixture to the green (ground) wire from the power supply using a wire nut.
   • For 0-10V dimming, connect the purple (D+) and gray (D-) wires from the fixture to the corresponding dimming lines from your 0-10V dimmer.
6. Бяспечная правадка: Carefully push all connected wires and wire nuts into the junction box. Close the junction box cover and secure it with the screw.
7. Канчатковая праверка: Ensure all connections are secure and the panel is properly seated in the ceiling grid.

4. Інструкцыя па эксплуатацыі

The CycevSun LED Flat Panel Light offers adjustable settings for color temperature and wattage to suit your lighting needs.

Adjusting Color Temperature and Wattage:

On the back of each panel light, there are two slide switches: one for color temperature (CCT) and one for wattage. These adjustments must be made раней installation or by accessing the back of the installed panel.

• Color Temperature (CCT) Switch: Select 3000K (Warm White), 4000K (Cool White), or 5000K (Daylight).
• Ватtage Пераключальнік: Choose between 30W, 40W, or 50W to control brightness and energy consumption.

Зацямненне 0-10 В:

The fixture is designed for smooth 0-10V dimming, allowing you to adjust the light output from 100% to 0% with a compatible 0-10V dimmer switch. Ensure your dimmer is a low-voltage 0-10V type and not a 120V triac dimmer.

5. Тэхнічнае абслугоўванне

Regular maintenance helps ensure the longevity and optimal performance of your LED panel light.

• Уборка: Адключыце электрычнасць перад чысткай. Выкарыстоўвайце мяккую, сухую або злёгку змочаную губку.amp cloth to wipe the surface of the panel. Avoid abrasive cleaners, solvents, or harsh chemicals that could damage the finish or optical components.
• агляд: Periodically check for any loose connections or visible damage. If any issues are found, consult a qualified electrician.

6. Выпраўленне непаладак

If you encounter issues with your LED panel light, refer to the following common troubleshooting steps:

If the problem persists after attempting these solutions, please contact CycevSun customer support.

7. Тэхнічныя характарыстыкі

8. Гарантыя і падтрымка

CycevSun is committed to providing quality products and customer satisfaction.

• Гарантыя: This product comes with a 5-year quality promise.
• Падтрымка кліентаў: For any defects or inquiries, CycevSun aims to reply within 12 hours and provide a satisfactory solution.

For further assistance, please refer to the contact information provided with your purchase or visit the official CycevSun webсайт.