HaiweiTech HHD-101 4K Video Audio Decoder User Manual

1. Уводзіны

The HaiweiTech HHD-101 is a versatile H.265/H.264 4K Video Audio Decoder designed for various professional applications, including advertisement displays, video encoding, and IP camera decoding. It supports a wide range of IP protocols such as RTMP, RTSP, RTP, HTTP, HLS, and UDP, and offers both HDMI (up to 4K@30FPS) and CVBS/BNC outputs. This manual provides comprehensive instructions for the setup, operation, and maintenance of your HHD-101 decoder.

2. Інфармацыя па бяспецы

• Ensure the device is powered by a 12V 2A power supply. Using an incorrect power supply may damage the unit.
• Не падвяргайце прыладу ўздзеянню вады, вільгаці або экстрэмальных тэмператур.
• Пазбягайце размяшчэння прылады пад прамымі сонечнымі прамянямі або побач з крыніцамі цяпла.
• Не спрабуйце адкрываць або рамантаваць прыладу самастойна. Звяртайцеся да кваліфікаванага персаналу па любыя паслугі па абслугоўванні.
• Забяспечце належную вентыляцыю вакол прылады, каб прадухіліць перагрэў.
• Адключыце электрычнасць перад чысткай або перамяшчэннем прылады.

3. Змесціва ўпакоўкі

Please check the package contents upon unpacking. If any items are missing or damaged, contact your vendor immediately.

• HaiweiTech HHD-101 Decoder Unit
• 12В адаптар сілкавання
• Кіраўніцтва карыстальніка (гэты дакумент)

4. Прадукт скончыўсяview

Familiarize yourself with the various ports and indicators on the HHD-101 decoder.

Малюнак 4.1: Пярэдняя панэль зверхуview of HHD-101 Decoder.

Малюнак 4.2: Задняя панэль зверхуview of HHD-101 Decoder.

Figure 4.3: Detailed Port Diagram and Descriptions.

Апісанні портаў:

1. LAN (Ethernet port): Used for network connection. Configuration of the IP gateway may be required for normal operation.
2. Святлодыёдныя індыкатары:
   • Red: Power ON
   • Green: Network activity
3. RST (Скінуць): Press and hold the RST button until the green LED light turns off to reset the device.
4. AV OUT (CVBS out): Кампазітны відэавыхад.
5. HDMI OUT (HDMI out): High-Definition Multimedia Interface output.
6. BNC OUT (BNC out): Раз'ём BNC для выхаду відэа.
7. RS485: Serial communication port (GEN, IO-1, IO-2, 485A, 485B).
8. Магутнасць: 12V 2A DC power input.

5. Настройка

Follow these steps to set up your HHD-101 decoder:

1. Падключыце харчаванне: Connect the provided 12V 2A power adapter to the "Power In" port (8) on the rear panel of the decoder. Plug the adapter into a power outlet. The red LED indicator should illuminate.
2. Падключэнне да сеткі: Connect an Ethernet cable from your network router or switch to the "LAN" port (1) on the front panel. The green LED indicator should illuminate, indicating network activity.
3. Video Output Connection:
   • For HDMI output: Connect an HDMI cable from the "HDMI OUT" port (5) to your display device (e.g., TV, monitor).
   • For CVBS/BNC output: Connect a BNC cable from the "BNC OUT" port (6) or an AV cable from the "AV OUT" port (4) to your display device.
4. Audio Output (if applicable): If using AV OUT, audio will be carried through the composite cable. For HDMI, audio is embedded in the HDMI signal.
5. RS485 Connection (Optional): If required for control or data transmission, connect your RS485 devices to the RS485 terminal block (7).

Once all connections are made, the device is ready for configuration and operation.

6. Інструкцыя па эксплуатацыі

The HHD-101 decoder is designed to receive and decode various IP video streams. Operation typically involves configuring the decoder via its web interface to receive the desired stream.

6.1. Доступ да Web Інтэрфейс

1. Ensure the decoder is connected to your network as described in the Setup section.
2. Find the IP address of the decoder. This can often be done using a network scanning tool or by checking your router's connected devices list. The default IP address is typically provided in the separate software utility or quick start guide.
3. Адкрыйце a web браўзер на кампутары, падлучаным да той жа сеткі.
4. Enter the decoder's IP address into the browser's address bar and press Enter.
5. Log in using the default username and password (refer to the quick start guide or contact support if unknown).

6.2. Configuring IP Stream Decoding

У межах ст web interface, you will find options to configure the input stream. The HHD-101 supports multiple protocols:

Figure 6.1: Supported IP Protocols for HHD-101 Decoder.

• Navigate to the "Input Settings" or "Stream Configuration" section.
• Select the desired protocol (e.g., RTMP, RTSP, HLS, UDP).
• Enter the source IP address or URL of the video stream you wish to decode.
• Configure any additional parameters such as port numbers, authentication credentials, or specific stream IDs as required by your source.
• Save the settings. The decoder should begin receiving and outputting the video stream to the connected display.

6.3. Мульты-View Расшыфроўка

The HHD-101 supports decoding up to 4 channels for multi-view display. Consult the web interface documentation for specific instructions on configuring multi-view layouts and switching between sources.

6.4. Proprietary Protocol (P-P)

For ultra-low latency point-to-point transmission, the HHD-101 decoder can be used with Haiwei proprietary protocol encoders. This solution is available only when using both HaiweiTech encoders and decoders.

Figure 6.2: Typical System Diagram with HaiweiTech Encoder and Decoder.

7. Тэхнічнае абслугоўванне

• Уборка: Для чысткі вонкавых паверхняў прылады выкарыстоўвайце мяккую сухую тканіну. Не выкарыстоўвайце вадкія ачышчальнікі або аэразолі.
• Вентыляцыя: Ensure the ventilation slots are clear of dust and obstructions to maintain proper airflow.
• Абнаўленні прашыўкі: Periodically check the HaiweiTech webна сайце або звярніцеся ў службу падтрымкі, каб даведацца пра даступныя абнаўленні прашыўкі, каб забяспечыць аптымальную прадукцыйнасць і доступ да новых функцый.
• захоўванне: Калі прылада захоўваецца працяглы час, адключыце яе ад сеткі і захоўвайце ў прахалодным, сухім месцы.

8. Выпраўленне непаладак

9. Тэхнічныя характарыстыкі

10. Гарантыя і падтрымка

For warranty information, please refer to the documentation provided at the time of purchase or visit the official HaiweiTech website. For technical support, additional manufacturing services (SDK/API, IP finder/Video management platform/IOS Android APP), solution analysis, or OEM services, please contact HaiweiTech directly. Contact details are typically available on the manufacturer's website or through your vendor.

Note: Haiwei proprietary protocol based ultra low latency point to point transmission solution is available with the decoder only. Additional manufacturing Services:SDK/API,IP finder/Video management platform/IOS Android APP,Solution analyze,OEM(more detail:hansen(at)hwsxtec(.)com)