BETAFPV LiteRadio 2 SE 2.4GHZ 8CH Transmitter Instruction Manual

1. паview

The BETAFPV LiteRadio 2 SE is a 2.4GHZ 8-channel radio transmitter designed for RC drones, particularly suited for beginners. It supports multiple protocols including Frsky D16, Frsky D8, and Futaba S-FHSS. This transmitter features an ergonomic design with a non-slip texture for comfortable handling and includes a built-in 1000mAh 1S battery, offering approximately 8 hours of usage. It can be conveniently charged via a USB Type-C port and includes a low voltage warning function. The LiteRadio 2 SE also functions as a USB joystick, allowing seamless connection to a PC for FPV simulator practice.

Image 1.1: The BETAFPV LiteRadio 2 SE 2.4GHZ 8CH Transmitter, showcasing its ergonomic design and dual gimbals.

2. Асноўныя магчымасці

• LiteRadio System: Utilizes the BETAFPV LiteRadio system, simplifying joystick calibration and firmware updates for ease of use, especially for beginners.
• Убудаваная батарэя: Equipped with a built-in 1000mAh 1S battery, providing approximately 8 hours of continuous operation.
• Зарадка USB Type-C: Conveniently rechargeable via a USB Type-C port.
• Нізкі абtage Папярэджанне: Features an LED indicator that flashes blue when the battery voltage апускаецца ніжэй за 3.5В.
• Эрганамічны дызайн: Designed for comfortable handling with a non-slip texture.
• Сумяшчальнасць сімулятара: Functions as a USB joystick, allowing direct connection to a PC for use with FPV simulators.
• Падтрымка некалькіх пратаколаў: Compatible with Frsky D16, Frsky D8, and Futaba S-FHSS protocols.

3. Кіраўніцтва па наладцы

3.1 Распакоўка і першапачатковы агляд

Upon receiving your LiteRadio 2 SE, carefully unbox the package and inspect all components for any signs of damage. Ensure all listed items are present.

Image 3.1: Contents of the LiteRadio 2 SE package, including the transmitter, manual, and support information.

3.2 Gimbal Stick Installation

The LiteRadio 2 SE gimbals are designed for quick and tool-free installation. Simply screw the gimbal sticks into their respective positions on the transmitter.

Image 3.2: Close-up of the gimbal sticks on the LiteRadio 2 SE transmitter.

3.3 Зарадка акумулятара

The transmitter comes with a built-in 1000mAh 1S battery. To charge, connect the included USB Type-C cable to the charging port on the transmitter and a suitable USB power source (e.g., computer, USB wall adapter). The charging indicator LED will show the charging status.

Image 3.3: The USB Type-C charging port located on the top edge of the LiteRadio 2 SE transmitter.

3.4 Connecting to a PC for Simulator Use

The LiteRadio 2 SE can be used as a USB joystick for FPV simulators. Connect the transmitter to your PC using a USB Type-C cable. The PC should recognize it as a joystick device, allowing you to configure it within your preferred FPV simulator software.

4. Інструкцыя па эксплуатацыі

4.1 Уключэнне/выключэнне

• Каб уключыць прыладу, націсніце і ўтрымлівайце кнопку харчавання, пакуль не загарыцца святлодыёдны індыкатар.
• Каб выключыць, націсніце і ўтрымлівайце кнопку харчавання, пакуль святлодыёдны індыкатар не выключыцца.

4.2 Binding to a Receiver

The binding procedure varies depending on the receiver and protocol (Frsky D16, Frsky D8, Futaba S-FHSS). Generally, you will need to put your receiver into binding mode and then activate the binding sequence on the LiteRadio 2 SE. Refer to your drone's flight controller or receiver manual for specific binding instructions. The LiteRadio 2 SE typically has a dedicated button or stick combination for initiating binding mode.

4.3 Каліброўка кардана

Regular calibration of the gimbals ensures precise control. The LiteRadio system allows for easy joystick calibration. Consult the official BETAFPV support resources for detailed steps on how to perform gimbal calibration.

4.4 Нізкая Voltage Папярэджанне

Калі ўнутраная батарэя voltage drops below 3.5V, the LED indicator on the transmitter will flash blue, signaling that it's time to recharge the unit.

5. Тэхнічнае абслугоўванне

• Уборка: Для чысткі вонкавай паверхні перадатчыка выкарыстоўвайце мяккую сухую тканіну. Пазбягайце выкарыстання агрэсіўных хімічных рэчываў або абразіўных матэрыялаў.
• захоўванне: Store the transmitter in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, ensure the battery is charged to approximately 50-60% to prolong its lifespan.
• Абнаўленні прашыўкі: Periodically check the BETAFPV website for firmware updates. Keeping the firmware updated can improve performance and add new features.

6. Выпраўленне непаладак

• Перадатчык не ўключаецца: Ensure the battery is sufficiently charged. Connect to a USB Type-C power source and check if the charging LED activates.
• Unable to bind to receiver:
  • Verify that both the transmitter and receiver are in binding mode.
  • Confirm that the transmitter's protocol (Frsky D16, D8, or Futaba S-FHSS) matches the receiver's protocol.
  • Ensure the transmitter and receiver are within close proximity during the binding process.
• Poor control response/drift:
  • Perform gimbal calibration as described in the operating instructions or the official BETAFPV support page.
  • Check for any physical obstructions or damage to the gimbals.
• Not recognized by FPV simulator:
  • Ensure the USB Type-C cable is securely connected to both the transmitter and the PC.
  • Check your PC's device manager to confirm the transmitter is recognized as a joystick or game controller.
  • Verify that your FPV simulator software is correctly configured to use the LiteRadio 2 SE as an input device.

7. Тэхнічныя характарыстыкі

8. Гарантыя і падтрымка

For warranty information, technical support, or further assistance with your BETAFPV LiteRadio 2 SE transmitter, please refer to the official BETAFPV support channels.

• Афіцыйная падтрымка Webсайт: http://support.betafpv.com
• Facebook Community: http://facebook.com/betafpv

Always ensure you are using genuine BETAFPV parts and accessories for optimal performance and safety.