Westclox Tilt & Swivel Digital Alarm Clock Instruction Manual

Уводзіны

Thank you for choosing the Westclox Tilt & Swivel Digital Alarm Clock. This manual provides detailed instructions for the setup, operation, and maintenance of your new alarm clock. Please read this manual thoroughly before use to ensure proper functionality and to maximize your product experience.

Асноўныя характарыстыкі

• Лічбавай дысплей: Абсталяваны вялікім 1.8-цалевым лічбавым святлодыёдным дысплеем для зручнага чытання.
• Дызайн з магчымасцю нахілу і павароту: Unique tilt and swivel stand allows flexible positioning for optimal viewінж.
• Вельмі вялікі памер: Measures 11" wide x 5" high x 5" deep for ample адлюстраванне прасторы.
• Quiet Alarm: Uses a loud, clear alarm sound.
• Трывалая канструкцыя: Made from sturdy ABS plastic with a powder-coated finish.

Image: The Westclox Tilt & Swivel Digital Alarm Clock, highlighting its large display and adjustable stand.

Настройка

Powering Your Clock

The Westclox Digital Alarm Clock operates primarily via AC power. Connect the provided power adapter to the clock's power input port and then plug it into a standard electrical outlet. The display will illuminate, indicating power is supplied.

Усталёўка рэзервовага капіявання батарэі

Для рэзервовага харчавання падчас выхадуtages, install 2 AAA batteries (not included) into the battery compartment located on the bottom of the clock. Ensure correct polarity (+/-) as indicated inside the compartment. The battery backup maintains time and alarm settings but does not power the display.

Першапачатковая ўстаноўка часу

Upon first power-up or after a prolonged power loss without battery backup, the display may show a default time. Refer to the 'Setting the Time' section under Operating Instructions to set the current time.

Інструкцыя па эксплуатацыі

Ўстаноўка часу

1. Націсніце і ўтрымлівайце УСТАНОВА ЧАСУ button (usually located on the back or top of the clock) until the hour digits begin to flash.
2. Націсніце ГАДЗІНА button repeatedly to adjust the hour. Pay attention to the PM indicator if using a 12-hour format.
3. Націсніце ХВІЛІНА некалькі разоў націсніце кнопку, каб наладзіць хвіліны.
4. Націсніце УСТАНОВА ЧАСУ button again to confirm the time and exit time setting mode.

Setting Alarms (AL.1 and AL.2)

This clock features two independent alarms, AL.1 and AL.2.

1. Націсніце і ўтрымлівайце AL.1 НАБОР or AL.2 НАБОР кнопку, пакуль лічбы гадзін будзільніка не пачнуць міргаць.
2. Націсніце ГАДЗІНА button to adjust the alarm hour. Observe the PM indicator.
3. Націсніце ХВІЛІНА кнопку, каб наладзіць хвіліну будзільніка.
4. Націсніце адпаведную AL.1 НАБОР or AL.2 НАБОР зноў націсніце кнопку, каб пацвердзіць час будзільніка.
5. To activate or deactivate an alarm, locate the AL.1 ВКЛ/ВЫКЛ or AL.2 ВКЛ/ВЫКЛ switch/button. Slide the switch to 'ON' or press the button to toggle the alarm. An indicator light (e.g., AL.1 or AL.2) will appear on the display when the alarm is active.

Функцыя адкладання

Image: The top of the Westclox Digital Alarm Clock showing the prominent snooze/dimmer button.

Калі гучыць будзільнік, націсніце вялікую кнопку СНАОЗ / ДЫМЕР button located on the top of the clock. The alarm will temporarily pause and sound again after approximately 9 minutes. To turn off the alarm completely, press the corresponding AL.1 ВКЛ/ВЫКЛ or AL.2 ВКЛ/ВЫКЛ кнопка/пераключальнік.

Дыммер дысплея

The СНАОЗ / ДЫМЕР button also controls the brightness of the LED display. Press this button (without an active alarm) to cycle through different brightness levels (e.g., High, Medium, Low, Off). Select the desired brightness for your environment.

Tilt and Swivel Feature

The clock is designed with a unique base that allows the display to be tilted vertically and swiveled horizontally. Gently adjust the clock face to your preferred viewing angle for optimal readability from any position in the room.

Тэхнічнае абслугоўванне

To ensure the longevity and optimal performance of your Westclox Digital Alarm Clock, follow these simple maintenance guidelines:

• Уборка: Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these may damage the finish or electronic components.
• Размяшчэнне: Place the clock on a stable, flat surface. Avoid areas with extreme temperatures, direct sunlight, high humidity, or strong vibrations.
• Замена батарэі: Replace the AAA backup batteries annually or when the clock experiences frequent power outages to ensure settings are retained.

Ліквідацыю непаладак

Тэхнічныя характарыстыкі

Гарантыя і падтрымка

For warranty information or technical support, please refer to the packaging or contact Westclox customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.