aigo AZ300 Mid Tower Computer Case User Manual

1. Уводзіны

Thank you for choosing the aigo AZ300 Mid Tower Computer Case. This manual provides detailed instructions for the installation, operation, and maintenance of your new computer case. Please read this manual thoroughly before beginning installation to ensure proper setup and safe use.

Figure 1: aigo AZ300 Mid Tower Computer Case (White)

2. Інфармацыя па бяспецы

• Always disconnect the power supply from the wall outlet before installing or servicing any components inside the case.
• Handle tempered glass panels with care. They are fragile and can break if dropped or subjected to impact.
• Avoid placing the case in areas with high humidity, extreme temperatures, or direct sunlight.
• Трымайце дробныя дэталі і шрубы далей ад дзяцей.
• Забяспечце належнае зазямленне, каб прадухіліць пашкоджанне электрычным токам.

3. Прадукт скончыўсяview

3.1 Пярэдняя панэль уводу/вываду

Пярэдняя панэль уводу/вываду забяспечвае зручны доступ да асноўных партоў і элементаў кіравання.

Малюнак 2: Размяшчэнне пярэдняй панэлі ўводу/вываду

• Порт тыпу C: 1x USB Type-C port for modern connectivity.
• Порт USB 2.0: 1x USB 2.0 port for peripheral connections.
• Порт USB 3.0: 1x USB 3.0 port for high-speed data transfer.
• HD Audio (Headset/Microphone): Separate jacks for audio output and microphone input.
• Reset/LED Button: Resets the system or controls LED lighting (if applicable).
• Кнопка харчавання: Уключае або выключае камп'ютар.

3.2 Internal Layout and Component Compatibility

The aigo AZ300 case offers a spacious interior designed for various component sizes and efficient cooling.

Figure 3: Internal Component and Cooling Layout

• Сумяшчальнасць матчынай платы: Supports ATX, Micro-ATX, and ITX motherboards.
• Storage Drive Bays: 2x 2.5" SSD bays and 2x 3.5" HDD bays.
• Даўжыня GPU: Maximum GPU length of 400mm.
• Даўжыня БП: Supports standard ATX power supplies up to 200mm.

4. Кіраўніцтва па ўстаноўцы

4.1 Падрыхтоўка справы

1. Пастаўце корпус на роўную, устойлівую паверхню.
2. Carefully remove the tempered glass side panels by unscrewing the thumb screws at each corner. Set the panels aside in a safe place.

Figure 4: Rear-Side View of Case

4.2 Устаноўка мацярынскай платы

1. Install the I/O shield (if not pre-installed) into the rear opening of the case.
2. Align your ATX, Micro-ATX, or ITX motherboard with the standoffs inside the case. Ensure all standoffs match the motherboard's mounting holes.
3. Замацуйце матчыну плату з дапамогай прадастаўленых шруб.

Figure 5: Motherboard Mounting Areas

4.3 Устаноўка блока сілкавання (БП).

1. Знайдзіце месца для мацавання блока харчавання ў ніжняй задняй частцы корпуса.
2. Slide your ATX power supply into the designated slot.
3. Secure the PSU to the case with screws from the rear.

4.4 Усталёўка назапашвальніка

1. 2.5-цалевыя SSD-назапашвальнікі: Mount SSDs to the dedicated 2.5" bays, typically located behind the motherboard tray or in specific drive cages.
2. 3.5-цалевыя жорсткія дыскі: Install HDDs into the 3.5" drive cages, usually found at the bottom front of the case.
3. Замацуйце ўсе дыскі адпаведнымі шрубамі.

Figure 6: Rear Internal View with Drive Bays

4.5 Expansion Card (GPU) Installation

1. Зніміце неабходныя вечкі слотаў пашырэння з задняй панэлі корпуса.
2. Устаўце відэакарту або іншыя карты пашырэння ў адпаведныя слоты PCIe на матчынай плаце.
3. Замацуеце карты шрубамі.

4.6 Усталёўка сістэмы астуджэння

The aigo AZ300 supports flexible cooling configurations.

• Падтрымка вентылятараў: Multiple 120mm fan mounting points are available at the top, front, and rear.
• Падтрымка радыятара: Supports water coolers with radiators of 360mm, 240mm, and 120mm in designated areas.

4.7 Арганізацыя кабеляў

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables for improved airflow and aesthetics.

5. Аперацыя

After all components are installed and connected, reattach the tempered glass side panels. Connect your peripherals, monitor, and power cable. Press the power button on the front I/O panel to start your system.

Use the USB ports (Type-C, USB 2.0, USB 3.0) for connecting external devices. The HD Audio jacks are for headphones and microphones.

6. Тэхнічнае абслугоўванне

Regular maintenance helps ensure optimal performance and longevity of your computer components.

6.1 Ачыстка пылавога фільтра

The aigo AZ300 case is equipped with dust filters to prevent dust buildup. Clean these filters periodically.

• Top Magnetic Dust Filter: Gently lift and remove the magnetic dust filter from the top panel. Clean it with compressed air or rinse with water (ensure it's completely dry before reattaching).
• Пылавы фільтр БП: The dust filter for the power supply is located at the bottom of the case. Slide it out for cleaning.

Figure 7: Side Panel and Bottom Dust Filter Location

7. Выпраўленне непаладак

• Сістэма не ўключаецца: Ensure all power cables (24-pin ATX, 8-pin CPU, GPU power) are securely connected. Check that the power supply switch is in the 'ON' position. Verify front panel power button connection to the motherboard.
• Няма адлюстравання: Confirm the monitor is connected to the graphics card (not the motherboard integrated graphics, unless no dedicated GPU is present). Reseat the graphics card and RAM modules.
• Перагрэў: Ensure all case fans are spinning and oriented correctly for airflow (intake/exhaust). Clean dust filters and internal components. Verify CPU cooler installation.
• Не працуюць USB-парты: Check that the USB headers from the front panel are correctly connected to the motherboard.

8. Тэхнічныя характарыстыкі

9. Гарантыя і падтрымка

aigo strives to provide excellent customer service. If you encounter any quality issues with your aigo AZ300 computer case, please contact us directly. We will assist you with troubleshooting and resolution.

For support, please refer to the contact information provided with your purchase or visit the official aigo webсайт.