Segotep Lux-S Mid-Tower Gaming PC Case Instruction Manual

1. Уводзіны

Thank you for choosing the Segotep Lux-S Mid-Tower Gaming PC Case. This manual provides essential information for the proper assembly, installation, and maintenance of your new PC case. Please read these instructions carefully before beginning the installation process to ensure optimal performance and longevity of your components.

2. Інфармацыя па бяспецы

• Заўсёды адключайце блок харчавання ад разеткі перад усталёўкай або зняццем якіх-небудзь кампанентаў.
• Асцярожна звяртайцеся з усімі кампанентамі, каб пазбегнуць пашкоджанняў ад статычнай электрычнасці. Падумайце аб выкарыстанні антыстатычнага бранзалета.
• Be cautious of sharp edges inside the case.
• Трымайце дробныя дэталі і шрубы далей ад дзяцей.
• Забяспечце належную вентыляцыю вакол сабранага ПК, каб прадухіліць перагрэў.

3. Змесціва ўпакоўкі

Калі ласка, пераканайцеся, што ўсе прадметы прысутнічаюць у вашай упакоўцы:

• Segotep Lux-S Mid-Tower PC Case
• 3 x 120mm Front Fans (pre-installed)
• Скрынка з аксэсуарамі (утрымлівае шрубы, распоркі, кабельныя сцяжкі і г.д.)
• Кіраўніцтва карыстальніка (гэты дакумент)

4. Прадукт скончыўсяview

The Segotep Lux-S is a stylish mid-tower gaming case featuring a full crystal-style design and transparent tempered glass side panels for showcasing your build. It is designed for efficient airflow and easy component installation.

Асноўныя характарыстыкі:

• Падтрымка мацярынскай платы: Compatible with ATX, Micro-ATX, and ITX motherboards.
• Астуджэнне: Includes three pre-installed 120mm front fans. Supports additional fans and air cooling solutions.
• Dust Filtration: Equipped with a magnetic anti-dust mesh on the top panel.
• захоўванне: Supports two 3.5" HDDs or one 3.5" HDD and one 2.5" SSD.
• Бакавыя панэлі: Tempered glass side panels for an aesthetic view унутраных кампанентаў.

Малюнак 4.1: Пярэдняя частка view of the Segotep Lux-S PC Case, highlighting the RGB fans and tempered glass panel.

Малюнак 4.2: Зверху ўніз view of the case, illustrating the magnetic dust filter on the top panel and the front I/O ports.

Figure 4.3: Interior layout of the Segotep Lux-S, detailing the motherboard mounting area, cable routing cutouts, and drive bay locations.

5. Настройка і ўстаноўка

5.1 Зняцце бакавых панэляў

Carefully remove the tempered glass side panel(s) by unscrewing the thumb screws located at the rear of the case. Place the panels on a soft, flat surface to prevent scratches.

5.2 Устаноўка мацярынскай платы

1. Install the I/O shield that came with your motherboard into the rear opening of the case.
2. Align your ATX, Micro-ATX, or ITX motherboard with the pre-installed standoffs. Ensure the standoffs match your motherboard's form factor.
3. Secure the motherboard using the appropriate screws from the accessory box.

5.3 Устаноўка блока сілкавання (БП).

Install your PSU into the dedicated compartment at the bottom rear of the case. Secure it with screws from the accessory box.

5.4 Усталёўка назапашвальніка

• 3.5-цалевыя жорсткія дыскі: Locate the drive cage at the bottom of the case. Slide the HDDs into the trays and secure them with screws. The case supports up to two 3.5" HDDs.
• 2.5-цалевыя SSD-назапашвальнікі: SSDs can be mounted on designated brackets, typically behind the motherboard tray or within the HDD cage. Secure with screws. The case supports one 2.5" SSD if one 3.5" HDD is used.

5.5 Відэакарта і карты пашырэння

Remove the necessary PCIe slot covers at the rear of the case. Insert your graphics card or other expansion cards into the motherboard's PCIe slots and secure them with screws.

5.6 Арганізацыя кабеляў

Выкарыстоўвайце адтуліны для пракладкі кабеляў і кропкі мацавання за паддонам матчынай платы для іх арганізацыі. Гэта паляпшае цыркуляцыю паветра і эстэтыку.

5.7 Connecting Front I/O and Fan Cables

Connect the front panel cables (USB, audio, power switch, reset switch, LED indicators) to the corresponding headers on your motherboard. Connect the pre-installed 120mm front fans to your motherboard's fan headers or a fan controller, if applicable.

6. Інструкцыя па эксплуатацыі

After all components are securely installed and cables are connected, replace the side panels. Connect your monitor, keyboard, mouse, and power cable. Press the power button on the front panel to start your computer.

Малюнак 6.1: Буйны план view of the three 120mm RGB fans pre-installed at the front of the Segotep Lux-S case.

Fan and Lighting Control:

The pre-installed fans may have RGB lighting. Depending on your motherboard and fan connections, you may be able to control the fan speed and lighting effects through your motherboard's software or a dedicated controller (if included or purchased separately).

7. Тэхнічнае абслугоўванне

• Ачыстка пылавога фільтра: The top panel features a magnetic dust filter. Regularly remove and clean it with water or a soft brush to maintain optimal airflow and prevent dust buildup inside the case.
• Генеральная ўборка: Выкарыстоўвайце мяккі, damp cloth to clean the exterior of the case. Avoid abrasive cleaners or solvents that could damage the finish or tempered glass.
• Выдаленне ўнутранага пылу: Periodically open the case and use compressed air to remove dust from internal components, especially heatsinks and fans.

8. Выпраўленне непаладак

8.1 Камп'ютар не ўключаецца

• Ensure the power cable is securely connected to both the PSU and the wall outlet.
• Check that the PSU switch is in the 'ON' position.
• Праверце, ці правільна падключаны кабель выключальніка харчавання на пярэдняй панэлі да раздыма матчынай платы.
• Confirm all internal power cables (24-pin ATX, 8-pin CPU, PCIe power) are properly seated.

8.2 Fans Not Spinning / RGB Not Lighting Up

• Check that fan power cables are securely connected to the motherboard or fan controller.
• Ensure RGB cables (if separate) are connected to the appropriate RGB headers on the motherboard or controller.
• Consult your motherboard manual for proper fan and RGB header connections and software control.

8.3 Праблемы з перагрэвам

• Ensure all case fans are operating correctly and oriented for optimal airflow (intake/exhaust).
• Clean dust filters and internal components regularly.
• Verify that CPU cooler and GPU fans are functioning properly.

9. Тэхнічныя характарыстыкі

10. Гарантыя і падтрымка

For warranty information and technical support, please refer to the warranty card included with your product or visit the official Segotep webсайт. Захоўвайце пацвярджэнне пакупкі для прэтэнзій па гарантыі.

If you encounter any issues not covered in this manual, please contact Segotep customer support for assistance.