Кіраўніцтва карыстальніка XTOOL TP150 TPMS Relearn Tool

1. Уводзіны

The XTOOL TP150 is a professional Tire Pressure Monitoring System (TPMS) tool designed for comprehensive TPMS service. It supports activation, relearning, programming of XTOOL sensors, and diagnostic functions for TPMS systems. This manual provides detailed instructions for the proper use and maintenance of your TP150 device.

2. Інфармацыя па бяспецы

Always observe the following safety precautions when operating the TP150 tool:

• Перад выкарыстаннем уважліва прачытайце ўсе інструкцыі.
• Do not operate the tool in wet conditions or near flammable liquids/gases.
• Ensure the vehicle's ignition is off before connecting or disconnecting the OBDII cable.
• Use only the accessories and parts specified by XTOOL.
• Захоўвайце сродак далей ад дзяцей.
• Properly dispose of old TPMS sensors and batteries according to local regulations.

3. Прадукт скончыўсяview

The XTOOL TP150 TPMS tool is a handheld device equipped with a user-friendly interface. It comes with two 315/433MHz dual-frequency sensors for programming.

Image: The XTOOL TP150 device, two XTOOL TPMS sensors, and their protective yellow carrying case.

3.1. Асноўныя магчымасці

• TPMS Activation: Activates all known OE and aftermarket TPMS sensors.
• Перанавучанне TPMS: Supports OBD Relearn and Static Relearn for all sensors.
• TPMS Programming: Programs XTOOL 315/433MHz sensors with four methods: Automatic ID Generation, Manual ID Entry, Copy ID by Activating, and Read ECU Copy ID.
• TPMS Diagnosis: Reads and clears TPMS Diagnostic Trouble Codes (DTCs), resets TPMS warning light.
• Адлюстраванне дадзеных у рэжыме рэальнага часу: Shows sensor ID, tire pressure, temperature, and sensor voltage.
• Праверка інфармацыі аб датчыках арыгінальнага абсталявання: Displays brand, part number, and frequency of OE sensors.

4. Настройка

4.1. Пачатковая налада прылады

1. Распакуйце: Carefully remove the TP150 tool and accessories from the packaging.
2. Уключэнне: Націсніце кнопку харчавання, каб уключыць прыладу.
3. Абнаўленне праграмнага забеспячэння: It is highly recommended to update the device software to the latest version before first use. Connect the device to a computer with internet access and follow the update instructions provided on the XTOOL official website or through the device's update menu. (Note: Some functionalities may not work correctly without the latest software.)

4.2. Падключэнне да аўтамабіля

1. Знайдзіце порт OBDII аўтамабіля, звычайна пад прыборнай панэллю з боку кіроўцы.
2. Пераканайцеся, што запальванне аўтамабіля знаходзіцца ў становішчы ВЫКЛ.
3. Connect the OBDII cable from the TP150 tool to the vehicle's OBDII port.
4. Turn the vehicle's ignition to the ON position (engine off). The TP150 will power on automatically via the OBDII connection.

5. Інструкцыя па эксплуатацыі

The TP150 offers various functions accessible from the main menu. Navigate using the directional buttons and confirm selections with the OK button.

5.1. Activating TPMS Sensors

1. У галоўным меню абярыце "TPMS" or "Activate".
2. Выберыце марку, мадэль і год выпуску аўтамабіля.
3. Выберыце "Activate Sensor".
4. Hold the TP150 tool near each tire's valve stem and press the activation button.
5. The tool will display sensor information (ID, pressure, temperature, voltage) upon successful activation.

5.2. Працэдуры перанавучання сістэмы кантролю TPMS

Relearning is required when new sensors are installed, tires are rotated, or the ECU is replaced.

1. У галоўным меню абярыце "TPMS", тады "Relearn".
2. Выберыце марку, мадэль і год выпуску аўтамабіля.
3. Choose the appropriate relearn method:
• Перанавучанне OBD: Connect the TP150 to the vehicle's OBDII port. Follow on-screen instructions to transfer new sensor IDs to the vehicle's ECU.
• Static Relearn: Follow the specific vehicle manufacturer's procedure, often involving a sequence of actions (e.g., turning ignition on/off, pressing brake pedal). The TP150 will guide you through the process.
4. Confirm successful relearn on the device screen and check the vehicle's dashboard for the TPMS warning light status.

5.3. Programming XTOOL Sensors

The TP150 can program XTOOL 315/433MHz sensors only. This is useful for replacing faulty sensors.

1. У галоўным меню абярыце "TPMS", тады "Program Sensor".
2. Place the XTOOL sensor to be programmed near the TP150's antenna.
3. Choose one of the following programming methods:
• Automatic ID Generation: The tool generates a new, unique sensor ID.
• Enter ID Manually: Input a specific sensor ID if known.
• Copy ID by Activating: Activate an existing sensor to copy its ID to the new XTOOL sensor.
• Read ECU Copy ID: Read sensor IDs directly from the vehicle's ECU via the OBDII port and copy them to new XTOOL sensors.
4. Follow the on-screen prompts to complete the programming.

5.4. Diagnosing TPMS System

1. Connect the TP150 to the vehicle's OBDII port.
2. У галоўным меню абярыце "TPMS", тады "Дыягназ".
3. The tool will scan the TPMS system for Diagnostic Trouble Codes (DTCs).
4. Review the displayed DTCs to identify system faults.
5. After repairs, select "Ачысціць коды няспраўнасці" to erase the codes and reset the TPMS warning light.

6. Тэхнічнае абслугоўванне

• Уборка: Працярыце прыладу мяккай, damp тканіна. Не выкарыстоўвайце абразіўныя ачышчальнікі або растваральнікі.
• захоўванне: Store the TP150 in its protective case in a dry, cool environment when not in use.
• Абнаўленні праграмнага забеспячэння: Regularly check for and install software updates to ensure optimal performance and compatibility with new vehicle models and sensors.
• Сыход за батарэяй: If the device has an internal battery, avoid fully discharging it for extended periods. Charge it periodically if stored for a long time.

7. Выпраўленне непаладак

8. Тэхнічныя характарыстыкі

9. Гарантыя і падтрымка

9.1. Інфармацыя аб гарантыі

XTOOL products typically come with a limited warranty covering defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official XTOOL webпадрабязныя ўмовы гарантыі, у тым ліку тэрмін дзеяння і пакрыцця, глядзіце на сайце.

9.2. Тэхнічная падтрымка

For technical assistance, software updates, or any inquiries regarding your XTOOL TP150, please contact XTOOL customer support through their official channels:

• Афіцыйны Webсайт: www.xtooltech.com (Check for support contact details, FAQs, and software downloads)
• Падтрымка па электроннай пошце: Глядзіце раздзел кантактаў на афіцыйным сайце webсайт.
• Інтэрнэт-рэсурсы: Many helpful guides and videos may be available on the XTOOL website or their official social media channels.

When contacting support, please have your product model (XT-TP150) and serial number ready.