ABB AD1NO-R-15m Modular Device Switch User Manual

1. Уводзіны

The ABB AD1NO-R-15m is an analog time switch designed for daily scheduling with a 15-minute switching interval. This modular device features one normally open (NO) channel and includes a power reserve function to maintain timekeeping during power outages. It is suitable for various electrical scheduling applications.

Малюнак 1: Спераду view of the ABB AD1NO-R-15m Modular Device Switch, highlighting its compact design and control interface.

2. Важныя інструкцыі па бяспецы

Please read and understand all safety instructions before installing, operating, or maintaining this device. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Усталёўку і абслугоўванне павінны выконваць толькі кваліфікаваныя спецыялісты.
• Disconnect power before installation, maintenance, or servicing to prevent electric shock.
• Ensure all wiring complies with local and national electrical codes and regulations.
• Не выкарыстоўвайце прыладу, калі яна выглядае пашкоджанай.
• This device is designed for indoor use in dry environments.

3. Прадукт скончыўсяview

The AD1NO-R-15m is an analog time switch with the following key features:

• Аналагавы цыферблат: For setting daily schedules.
• 15-Minute Switching: Allows precise control over connected circuits with 15-minute intervals.
• 1 Normally Open (NO) Channel: Кіруе адным электрычным ланцугом.
• Запас магутнасці: Maintains timekeeping for a specified duration during power interruptions.
• Модульны дызайн: Suitable for integration into standard electrical panels on a DIN rail.

Note: The power reserve ensures the timer continues to function accurately even if the main power supply is temporarily lost.

4. Настройка і ўстаноўка

Follow these steps for proper installation of the AD1NO-R-15m Modular Device Switch:

1. Адключэнне сілкавання: Before beginning, ensure the main power supply to the installation area is completely disconnected at the circuit breaker or fuse box. Verify with a voltagэлектронны тэстар.
2. Мантаж: Mount the AD1NO-R-15m switch onto a standard DIN rail within an appropriate electrical enclosure. Ensure it is securely fastened.
3. Праводка:
   • Connect the incoming phase (L) and neutral (N) wires to the designated input terminals of the time switch.
   • Connect the load wire from the output terminal of the time switch to the device you wish to control.
   • Ensure all connections are tight and secure. Refer to the wiring diagram printed on the device for specific terminal identification.
4. Аднаўленне харчавання: Once all connections are verified and secure, close the electrical enclosure and restore power to the circuit.

Always consult a qualified electrician for installation if you are unsure or lack experience with electrical wiring.

5. Інструкцыя па эксплуатацыі

To set the time and program the switching schedule:

1. Усталяваць бягучы час: Rotate the analog dial clockwise until the current time aligns precisely with the reference arrow or marker on the device's face.
2. Program Switching Times: The dial features small segments around its perimeter. Push in the segments corresponding to the times you want the connected circuit to be ON. Pull out segments for OFF periods. Each segment typically represents a 15-minute interval.
3. Operating Mode (if applicable): If your model includes a manual override switch (e.g., ON, AUTO, OFF), ensure it is set to "AUTO" for programmed operation.

The internal power reserve will automatically charge when the device is powered, ensuring continued accurate timekeeping during short power outagэс.

6. Тэхнічнае абслугоўванне

The AD1NO-R-15m is designed for minimal maintenance. Follow these guidelines to ensure optimal performance:

• Уборка: Keep the device clean and free from dust. Use a dry, soft cloth for cleaning. Do not use liquid cleaners, abrasive materials, or solvents.
• агляд: Periodically inspect the wiring connections for tightness and any signs of wear, corrosion, or damage. Ensure all terminals are secure.
• Умовы навакольнага асяроддзя: Каб пазбегнуць пашкоджанняў, пераканайцеся, што тэмпература і вільготнасць у рабочым асяроддзі знаходзяцца ў межах зададзеных дыяпазонаў.

There are no user-serviceable parts inside this device. Do not attempt to open the casing, as this will void the warranty and may expose you to electrical hazards.

7. Выпраўленне непаладак

If you encounter issues with your AD1NO-R-15m switch, refer to the table below for common problems and solutions:

If the problem persists after attempting these solutions, please contact ABB customer support for further assistance.

8. Тэхнічныя характарыстыкі

• мадэль: AD1NO-R-15m
• Нумар дэталі: 2CSM222461R1000
• вытворца: АББ
• Тып: Аналагавы рэле часу
• Switching Interval: 15 хвілін
• Каналы: 1 Звычайна адкрыты (НЕ)
• Запас магутнасці: так
• Вага прадмета: Прыкладна 2.82 унцый (80 грамаў)
• Памеры прадукту: Прыкладна 3.54 х 0.69 х 2.6 цалі (90 х 17.5 х 66 мм)
• Тып мацавання: DIN Rail (Wall Mount)
• Уключаныя кампаненты: Modular device switch
• Неабходныя батарэі: No (features internal power reserve)
• ASIN: B09BP4PFMF
• Першыя даступныя: 21 снежня 2024 г

Заўвага: тэхнічныя характарыстыкі могуць быць зменены без папярэдняга паведамлення.

9. Гарантыя і падтрымка

Інфармацыя аб гарантыі

For detailed warranty terms and conditions, please refer to the official ABB warranty statement provided with your purchase or visit the official ABB webсайт. Захоўвайце пацвярджэнне пакупкі для прэтэнзій па гарантыі.

Падтрымка кліентаў

For technical assistance, troubleshooting, or service inquiries, please contact ABB customer support through their official webсайт або кантактную інфармацыю, указаную на ўпакоўцы прадукту.

ABB Official Webсайт: www.abb.com