Гіпертрывалы 20886

Hyper Tough 300-Lumen LED Headlamp

Мадэль: 20886 Кіраўніцтва карыстальніка

1. Уводзіны

Thank you for choosing the Hyper Tough 300-Lumen LED Headlamp. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your headlampКалі ласка, уважліва прачытайце гэтую інструкцыю перад выкарыстаннем і захавайце яе для далейшага выкарыстання.

2. Інфармацыя па бяспецы

  • Бяспека акумулятара: Always insert batteries correctly, observing polarity (+/-). Do not mix old and new batteries, or different types of batteries. Remove batteries if the headlamp will not be used for an extended period. Dispose of used batteries responsibly.
  • Бяспека вачэй: Do not shine the light directly into eyes, as it can cause temporary vision impairment or damage.
  • Цяпло: The LED light source may become warm during prolonged use. Avoid direct contact with the light housing when operating for extended periods.
  • Воданепранікальнасць: Гэта галаваamp is IPX4 water-resistant, meaning it is protected against splashing water from any direction. It is not designed for submersion.
  • Уплыў: While impact-resistant, avoid dropping the headlamp from excessive heights to prevent damage.

3. Змесціва ўпакоўкі

  • Hyper Tough 300-Lumen LED Headlamp (1)
  • Акумулятары ААА (3)

4. Прадукт скончыўсяview

The Hyper Tough 300-Lumen LED Headlamp features a versatile lighting system with both spot and flood modes, controlled by a variable light output dial. It is designed for hands-free illumination in various environments.

Hyper Tough 300-Lumen LED Headlamp, overall view

Малюнак 1: У цэлым view of the Hyper Tough 300-Lumen LED Headlamp, showing the main light unit, adjustable strap, and rear battery pack.

Close-up of the variable light output dial on the Hyper Tough headlamp

Малюнак 2: Close-up of the variable light output dial, located on the side of the headlamp unit, used for mode and brightness selection.

5. Настройка

5.1 Устаноўка батарэі

  1. Locate the battery compartment at the rear of the head strap.
  2. Адкрыйце крышку батарэйнага адсека.
  3. Insert three (3) AAA batteries, ensuring correct polarity (+ and -) as indicated inside the compartment.
  4. Надзейна зачыніце крышку батарэйнага адсека.

5.2 Adjusting the Head Strap

Хэдлamp features a two-way fully adjustable head strap for a comfortable and secure fit. Adjust the elastic straps by sliding the buckles to achieve the desired tension and position on your head. The rear-mounted battery pack aids in improved weight distribution.

6. Інструкцыя па эксплуатацыі

The Hyper Tough 300-Lumen LED Headlamp offers multiple lighting modes and variable output control via a single dial.

  1. Уключэнне/выключэнне харчавання: Rotate the variable light output dial clockwise to turn the headlamp on. Continue rotating to cycle through modes and adjust brightness. Rotate counter-clockwise until it clicks to turn the headlamp выключаны.
  2. Mode Selection and Brightness Control: The dial allows seamless transition between different light modes and brightness levels.
    • Spot Modes: As you rotate the dial clockwise from the off position, the headlamp will activate in spot mode. Continue rotating to increase brightness through Spot Low, Spot Medium, and Spot High. This mode provides a focused beam for distance illumination.
    • Рэжым паводкі: Further rotation of the dial will engage the flood mode. This mode provides a wide, uniform beam pattern, ideal for close-range work and reduced glare.
Hyper Tough headlamp illuminating in spot mode

Малюнак 3: Хэдлamp operating in a focused spot beam mode, suitable for illuminating distant objects.

Hyper Tough headlamp illuminating in flood mode

Малюнак 4: Хэдлamp operating in a wide flood beam mode, providing broad illumination for close-up tasks.

7. Тэхнічнае абслугоўванне

7.1 Ачыстка

Выцерці галавуamp з мяккім, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the plastic housing or lens.

7.2 Сыход за батарэяй і яе захоўванне

  • Replace batteries when the light output becomes dim or inconsistent.
  • Калі галаўныamp will not be used for an extended period (e.g., more than one month), remove the batteries to prevent leakage and corrosion.
  • Захаваць галавуamp у прахалодным, сухім месцы, удалечыні ад прамых сонечных прамянёў.

8. Выпраўленне непаладак

праблемаМагчымая прычынаРашэнне
Хэдлamp не ўключаецца.Батарэйкі разраджаныя або няправільна ўстаўленыя.Заменіце батарэйкі новымі, выконваючы палярнасць.
Святло цьмянае або мігціць.Нізкі зарад батарэі.Заменіце батарэі.
Цыферблат тугі або яго цяжка паварочваць.Бруд або смецце ў механізме.Gently clean around the dial. Do not force rotation.

9. Тэхнічныя характарыстыкі

АсаблівасцьДэталь
Нумар мадэлі20886
Light Output (Spot High)300 люмен
Run Time (Spot High)9 гадзіны 15 хвілін
Beam Distance (Spot High)155 метраў
Light Output (Spot Medium)80 люмен
Run Time (Spot Medium)32 гадзіны 30 хвілін
Beam Distance (Spot Medium)94 метраў
Light Output (Spot Low)30 люмен
Run Time (Spot Low)85 гадзіны 15 хвілін
Beam Distance (Spot Low)59 метраў
Light Output (Flood)95 люмен
Run Time (Flood)24 гадзіны
Beam Distance (Flood)13 метраў
Крыніца харчавання3 батарэйкі AAA (у камплекце)
Тып крыніцы святласвятлодыёд
МатэрыялПластыкавыя
ВоданепранікальнасцьIPX4 (воданепранікальнасць)
Ўдаратрываласць1-метровы
Памеры (пасылка)21.1 х 17.6 х 7.9 см
Вага (пасылкі)256 г

10. Гарантыя і падтрымка

Specific warranty information for this product was not provided in the available data. For warranty claims or technical support, please refer to the product packaging or contact Hyper Tough customer service directly through their official webсайт або кантактныя каналы.