1. Уводзіны
Thank you for choosing the PRORECK PR-122M Complete Car Subwoofer System. This system is designed to provide powerful and clear bass for your vehicle's audio setup. It includes a dual 12-inch subwoofer in a loaded enclosure, a mono block amplifier, and a complete wiring installation kit. This manual provides essential information for the safe and correct installation, operation, and maintenance of your new car audio system.
2. Інфармацыя па бяспецы
Калі ласка, уважліва прачытайце ўсе інструкцыі перад устаноўкай і выкарыстаннем. Невыкананне гэтых рэкамендацый можа прывесці да пашкоджання вырабу, транспартнага сродку або траўмаў.
- Рэкамендуецца прафесійная ўстаноўка: If you are unsure about any aspect of installation, consult a qualified car audio technician.
- Адключыце акумулятар: Заўсёды адключайце адмоўны вывад акумулятара аўтамабіля перад пачаткам любых электрамантажных работ, каб пазбегнуць кароткага замыкання.
- Правільная электраправодка: Ensure all wiring is correctly routed, secured, and insulated to prevent damage from pinching, abrasion, or heat. Use appropriate gauge wires as specified.
- Вентыляцыя: Змантаваць amplifier in a location that allows for adequate airflow to prevent overheating.
- Бяспечнае мацаванне: Securely mount the subwoofer enclosure and amplifier to prevent them from shifting during vehicle movement, which could cause injury or damage.
- Узроўні гучнасці: Працяглае ўздзеянне высокай гучнасці можа пашкодзіць слых. Адрэгулюйце гучнасць адказна.
3. Змесціва ўпакоўкі
Праверце наяўнасць усіх прадметаў у камплекце:
- PRORECK PR-1500.1M Mono Block Ampліфатор (1)
- Dual 12-inch Car Subwoofer in Loaded Enclosure (1)
- Поўнае Amplifier Installation Wire Kit (1)
The wiring kit includes:
- High Grade Twisted Pair 100% Copper RCA Cables
- Blue Super Flex Power Cable
- Чорны провад зазямлення
- Black Remote Cable and Remote Control
- Black Split Tube
- Акустычны провад
- Gold Plated ANL Heat Resistant Fuse Holder
- 30 Amp ANL Gold Plated Fuse
- Accessories: Wire ties, ring terminals, butt connectors, spades, and grommet
Image: All components included in the PRORECK wiring installation kit.
4. Настройка і ўстаноўка
Proper installation is critical for optimal performance and safety. Follow these steps carefully.
4.1 Subwoofer Enclosure Placement
Place the dual 12-inch subwoofer enclosure in a secure location within your vehicle, typically the trunk or cargo area. Ensure it is firmly anchored to prevent movement during driving. The enclosure features a 15% angle for optimal vehicle bass alignment.
Выява: спераду view of the PRORECK PR-122M dual 12-inch subwoofer enclosure.
Выява: Задняя частка view of the PRORECK PR-122M subwoofer enclosure, showing the speaker terminals.
4.2 Amplifier Мацаванне
Mount the PRORECK PR-1500.1M amplifier in a dry, well-ventilated area, away from direct sunlight or heat sources. Ensure there is sufficient space around the amplifier for proper heat dissipation. Secure it firmly to a solid surface using appropriate hardware.
Выява: Уверсе view of the PRORECK PR-1500.1M amplifier, showing the control panel.
Выява: Збоку view of the PRORECK PR-1500.1M amplifier, showing the power and speaker terminals.
4.3 Правадныя злучэнні
Refer to the diagram below for detailed connection points on the PRORECK PR-1500.1M amplifier. Use the provided wiring kit for all connections.
Image: Detailed diagram of the PRORECK PR-1500.1M amplifier's input, output, and control connections.
- Power Connections (GND, REM, +12V):
- GND (зямля): Connect the black ground wire from the wiring kit to a clean, unpainted metal surface on the vehicle chassis. Ensure a solid, low-resistance connection.
- REM (Дыстанцыйнае ўключэнне): Connect the black remote cable from the wiring kit to the remote turn-on output of your head unit. This wire turns the amplifier on and off with your car's stereo.
- +12 В (харчаванне): Connect the blue super flex power cable from the wiring kit to the positive terminal of your car battery. Install the 30 Amp ANL fuse holder and fuse as close to the battery as possible (within 18 inches) for protection.
- Speaker Output (4 ohm): Connect the speaker wire from the subwoofer enclosure to the speaker output terminals on the amplifier. Ensure correct polarity (+ to + and - to -). The subwoofer system is designed for a 4-ohm mono-block connection.
- Лінейны ўваход RCA: Connect the RCA cables from your head unit's RCA pre-outs to the RCA Line Input on the ampзадымнік.
- Увод высокага ўзроўню: If your head unit does not have RCA pre-outs, you can use the High Level Input by connecting it directly to your head unit's speaker outputs.
- Full-Range RCA Output: This output can be used to daisy-chain the audio signal to another ampзадымнік.
- Dashboard Bass Remote Control Interface: Connect the remote control cable to this port.
- FUSE (30A): The amplifier has a built-in 30A fuse for protection.
5. Інструкцыя па эксплуатацыі
Пасля ўстаноўкі адрэгулюйце ampналады ліфіера для аптымальнага гучання.
5.1 AmpLifier Controls
The PRORECK PR-1500.1M amplifier features several controls to fine-tune your bass output:
- Кантроль узмацнення ўваходу: Адрэгулюйце гэта ў адпаведнасці з гучнасцю выхаднога сігналуtage of your head unit. Start with the gain at minimum and slowly increase it until you achieve clear, undistorted bass. Avoid setting it too high, as this can cause distortion.
- Bass EQ (5-12dB Narrow Bass Equalizer): Use this control to boost the bass frequencies. Adjust carefully to avoid over-emphasizing bass, which can lead to distortion.
- Fully Adjustable Low Pass Crossover (LPF): This filter allows only frequencies below the set point to pass through to the subwoofer. Adjust the LPF (e.g., 50Hz-250Hz) to blend the subwoofer's output seamlessly with your main speakers.
- Fully Adjustable Subsonic Filter: This filter removes extremely low frequencies that are inaudible and can cause the subwoofer to waste power and potentially damage itself. Set it slightly below your LPF setting, typically between 15Hz-50Hz.
- Mute & Delay Turn On Circuitry: This feature prevents turn-on thumps or pops.
- Power & Diagnostic LED Indicators: Гэтыя святлодыёды паказваюць amplifier's status. A green light typically indicates power, while a red light may indicate a protection mode or fault.
5.2 Dashboard Bass Remote Control
The included dashboard remote allows you to conveniently adjust the bass level from your driver's seat without needing to access the amplifier непасрэдна.
6. Тэхнічнае абслугоўванне
To ensure the longevity and performance of your PRORECK subwoofer system, follow these simple maintenance guidelines:
- Уборка: Перыядычна працірайце amplifier and subwoofer enclosure with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
- Праверце злучэнні: Regularly inspect all wiring connections to ensure they are secure and free from corrosion. Loose connections can lead to poor performance or damage.
- Вентыляцыя: Забяспечце amplifier's ventilation fins remain clear of obstructions to prevent overheating.
- Пазбягайце вільгаці: Keep the system dry and away from excessive moisture.
7. Выпраўленне непаладак
If you experience issues with your PRORECK subwoofer system, refer to the following common problems and solutions:
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Няма харчавання / AmpЖывільнік не ўключаецца |
|
|
| Няма вываду гуку |
|
|
| Скажоны гук |
|
|
| AmpПерагрэў запальніка |
|
|
8. Тэхнічныя характарыстыкі
Detailed specifications for the PRORECK PR-122M Subwoofer System:
- Тып прадукту: Complete Car Subwoofer System
- мадэль: ПР-122М
- Памер сабвуфера: Двайны 12-цалевы
- Пік магутнасці: 1500 ват
- RMS Power (Ampліквідатар): 200 Watts RMS Mono-block at 4 Ohms and 1% THD+N
- Dynamic Power (Ampліквідатар): 400 Вт пры 2 Ом
- АЧХ: 15 Гц - 20 кГц
- Ampклас Lifier: Class A/B Mono-Block
- Матэрыял корпуса: High quality aviation grade tweed carpet with embroidery
- Enclosure Angle: 15% (for vehicle bass alignment)
- Гукавыя шпулькі: High power 1.5" aluminum 4-layer voice coils
- Тэхналогія падключэння: RCA
- Рэжым вываду гуку: Мона
- Amplifier Dimensions (L x W x H): 11 х 9.1 х 1.9 цалі
- Памеры сабвуфера (Д х Ш х В): 28.7 х 14.2 х 15.7 цалі
9. Гарантыя і падтрымка
For warranty information and technical support, please refer to the documentation included with your purchase or visit the official PRORECK webсайт. Захоўвайце пацвярджэнне пакупкі для любых гарантыйных прэтэнзій.