Areyourshop 360W RGBW 4-in-1 LED Zoom Moving Head Wash Stage Кіраўніцтва па эксплуатацыі святла

1. Уводзіны

This manual provides detailed instructions for the safe and effective operation of your Areyourshop 360W RGBW 4-in-1 LED Zoom Moving Head Wash Stage Light. Please read this manual thoroughly before installation and use to ensure proper function and to prevent damage to the unit or injury to personnel. Keep this manual for future reference.

2. Інфармацыя па бяспецы

• Заўсёды падключайце прыладу да заземленай разеткі.
• Пераканайцеся, што магутнасць Voltagе супадае з названым абtage для адзінкі.
• Не выкарыстоўвайце прыладу, калі шнур харчавання пашкоджаны.
• Пазбягайце прамога ўздзеяння на вочы крыніцы святла.
• Забяспечце дастатковую вентыляцыю вакол прылады, каб прадухіліць перагрэў.
• Mount the unit securely using appropriate hardware and safety cables.
• Не адкрывайце корпус; унутры няма дэталяў, якія можа абслугоўваць карыстальнік. Звяртайцеся па ўсё абслугоўванне да кваліфікаванага персаналу.

3. Змесціва ўпакоўкі

Пасля адкрыцця ўпакоўкі пераканайцеся, што ўсе прадметы наяўныя і ў добрым стане:

• 1 x Areyourshop 360W RGBW 4-in-1 LED Zoom Moving Head Wash Stagе Святло
• 1 х Шнур харчавання
• 1 х мантажны кранштэйн
• 1 х Інструкцыя па эксплуатацыі на англійскай мове (гэты дакумент)

Image 3.1: The moving head light unit, power cord, and mounting bracket.

4. Прадукт скончыўсяview

The Areyourshop 360W Moving Head Light features 36 x 10W RGBW 4-in-1 LEDs, offering a wide range of color mixing and wash effects. It includes zoom functionality and multiple control modes for versatile stagэлектроннае асвятленне.

Выява 4.1: Спераду view of the moving head light with dimensions: approximately 38cm (15 inches) tall and 20cm (8.2 inches) wide at the base.

Image 4.2: The moving head light showcasing its ability to produce various color wash effects, including white, red, green, blue, and purple.

5. Тэхнічныя характарыстыкі

6. Настройка

6.1 Мантаж

1. Identify a suitable mounting location that can safely support the weight of the fixture.
2. Attach the provided mounting bracket to the fixture using the designated screws.
3. Securely fasten the fixture to a truss or other stable structure using appropriate clamps (not included) and the mounting bracket.
4. Always use a safety cable (not included) as a secondary attachment to prevent the fixture from falling in case of primary mounting failure.

6.2 Падключэнне харчавання

Connect the provided power cord to the power input on the rear of the fixture and then to a grounded power outlet. Ensure the power supply is stable and within the specified voltagе дыяпазон.

6.3 Падключэнне DMX (дадаткова)

For DMX control, connect a DMX cable from your DMX controller's output to the DMX IN port on the fixture. If linking multiple fixtures, connect the DMX OUT of the first fixture to the DMX IN of the next, and so on. Terminate the last fixture in the chain with a DMX terminator.

7. Рэжымы працы

The fixture can be operated in several modes, selectable via the LCD display and control buttons on the base of the unit.

7.1 Рэжым DMX512

This mode allows for professional control over all functions using a DMX controller. Set the DMX address for each fixture using the LCD display. Refer to the DMX channel chart (typically provided in a separate DMX manual or appendix) for specific channel assignments and functions.

7.2 Аўтаматычны рэжым

In Auto mode, the fixture runs through pre-programmed light shows automatically. Use the control buttons to select different auto programs or adjust speed settings.

7.3 Рэжым актывацыі гукам

The fixture's built-in microphone detects sound and synchronizes light patterns to the beat of the music. Sensitivity can often be adjusted via the menu.

7.4 Рэжым «галоўны-падпарадкаваны»

Link multiple fixtures together without a DMX controller. Set one fixture as the 'Master' and the others as 'Slave'. The slave units will mimic the master's movements and effects. Connect DMX OUT of the master to DMX IN of the first slave, and continue the chain.

8. Тэхнічнае абслугоўванне

8.1 Ачыстка

Regularly clean the lens and exterior housing with a soft, lint-free cloth. Do not use abrasive cleaners or solvents. Ensure the unit is powered off and disconnected before cleaning.

8.2 Тэхнічнае абслугоўванне вентылятара

The unit is equipped with an automatic cooling fan. Periodically check the fan vents for dust accumulation and clean as necessary to ensure efficient heat dissipation and prolong the lifespan of the LEDs.

9. Выпраўленне непаладак

• Няма харчавання: Check power cord connection, wall outlet, and ensure the power switch is on.
• Няма святла: Verify power, check selected operating mode, and ensure no DMX signal issues if in DMX mode.
• Няправільная паводзіны: If using DMX, check DMX cable connections, DMX address settings, and ensure the last fixture has a terminator. Try resetting the unit by power cycling.
• Перагрэў: Ensure adequate ventilation around the unit. Clean fan vents if obstructed by dust.

10. Гарантыя і падтрымка

For warranty information or technical support, please contact Areyourshop customer service through your purchase platform or the official Areyourshop webсайт. Захоўвайце чэк аб куплі як пацверджанне пакупкі.