Victrola T1 Bluetooth Turntable Instruction Manual

1. Уводзіны

The Victrola T1 Bluetooth Turntable is designed to bring your vinyl record collection to life with modern features and sleek aesthetics. This manual provides essential information for the proper setup, operation, and care of your turntable, ensuring an optimal listening experience.

Image 1: Victrola T1 Bluetooth Turntable with dust cover closed.

2. Што ў скрынцы

Пасля распакавання ўпэўніцеся ў наяўнасці ўсіх кампанентаў:

• Victrola T1 Turntable Unit
• Кіраўніцтва па эксплуатацыі
• Перахаднік на 45 абаротаў у хвіліну
• Premium Silicone Slip Mat
• Адаптар сілкавання

Image 2: Victrola T1 Turntable with dust cover open.

3. Інструкцыі па ўсталёўцы

3.1. Tonearm Counterweight and Anti-Skate Adjustment

Proper adjustment of the tonearm counterweight and anti-skate is crucial for optimal sound quality and to prevent damage to your records and stylus. The Victrola T1 features a factory-balanced VPC-190 Moving Magnetic (MM) cartridge.

1. Locate the Allen Wrench: Find the Allen wrench provided in the accessory box. This is the only tool needed for this adjustment.
2. Зняць вечка стылуса: Carefully remove the clear protective cover from the moving magnetic cartridge stylus.
3. Loosen Counterweight: Move the tonearm to the rear, where the counterweight is mounted. Insert the Allen wrench into the counterweight and rotate the screw counter-clockwise by a quarter turn to loosen it. This allows the counterweight to move freely.
4. Збалансуйце тонарм: Gently move the tonearm from its holder and position it between the tonearm holder and the platter. Rotate the counterweight until the tonearm is flat and perfectly balanced, floating horizontally.
5. Set Tracking Force to Zero: On the front of the counterweight, locate the number ring. While holding the counterweight in place, rotate only the number ring until the "0" (zero) aligns with the alignment mark (a straight line) on the rear of the tonearm.
6. Адрэгулюйце сілу прыцягнення: Now, rotate both the number ring and the counterweight together counter-clockwise by one and a half turns. This will align the "1" (one) on the number ring with the alignment mark, indicating a tracking force of 1.5 grams.
7. Secure Counterweight: While holding the counterweight in this position, use the Allen wrench to rotate the screw clockwise until it is secure.
8. Adjust Anti-Skate: Locate the anti-skate knob near the tonearm base. Rotate this knob to the recommended setting of 1.5. A small triangle mark indicates the setting.

Image 3: Close-up of the tonearm and stylus.

4. Інструкцыя па эксплуатацыі

4.1. Playing a Vinyl Record

1. Уключэнне: Press the power/volume knob on the front of the turntable to turn it on. The indicator light will illuminate.
2. Выберыце хуткасць: Ensure the turntable speed is set correctly for your record (33-1/3 RPM or 45 RPM).
3. Запіс месца: Carefully place your vinyl record on the platter. If playing a 45 RPM single, use the included 45 RPM adapter.
4. Пазіцыя тонарма: Gently lift the tonearm from its rest using the cueing lever. Move the tonearm over the desired starting groove of the record.
5. Ніжні тонарм: Slowly lower the tonearm onto the record using the cueing lever. The record will begin to play.
6. Наладзіць гучнасць: Use the power/volume knob or the included remote control to adjust the playback volume.
7. Спыніць прайграванне: At the end of the record, the turntable will auto-stop. Alternatively, lift the tonearm using the cueing lever and return it to its rest.

4.2. Bluetooth Connectivity (Vinyl Stream Technology)

The Victrola T1 features built-in Bluetooth 5.0 with Vinyl Stream Technology, allowing you to wirelessly transmit audio to any Bluetooth-enabled AV receiver, integrated amplifier, powered speakers, or headphones.

1. Уключыць Bluetooth: With the turntable powered on, press and hold the power/volume knob until the indicator light flashes blue, indicating pairing mode.
2. Спалучыць прыладу: On your Bluetooth-enabled receiving device (e.g., speaker, headphones), enable Bluetooth and select "Victrola T1" from the list of available devices.
3. Пацвердзіце падключэнне: Once connected, the indicator light on the turntable will turn solid blue. You can now play records, and the audio will stream wirelessly to your paired device.

Image 4: Vinyl Stream Technology for wireless audio transmission.

5. Тэхнічнае абслугоўванне

• Пылаахоўны чахол: Always keep the dust cover closed when the turntable is not in use to protect it from dust and debris.
• Уборка: Use a soft, dry cloth to clean the turntable's surface. Avoid abrasive cleaners or solvents. For the stylus, use a specialized stylus cleaning brush.
• Сыход за стылусам: Handle the stylus with extreme care. Avoid touching it with your fingers. Replace the stylus when signs of wear appear to prevent damage to your records.
• Ачыстка запісаў: Regularly clean your vinyl records with a proper record cleaning solution and brush to maintain sound quality and extend record life.

6. Выпраўленне непаладак

7. Тэхнічныя характарыстыкі

• Марка: Віктрола
• Назва мадэлі: T1
• Нумар мадэлі: VPT-1000-ESP
• Максімальная хуткасць кручэння: 45 RPM (supports 33-1/3 & 45 RPM)
• Тэхналогія падключэння: Wired, Wireless (Bluetooth 5.0 with Vinyl Stream Technology)
• матэрыял: Aluminum, Metal, Wood
• Вага прадмета: 7.28 кілаграма
• Крыніца харчавання: Corded Electric (127 Volts AC Motor)
• асаблівасць: Vinyl Stream Technology, Built-in Phono Preamp
• Картрыдж: Victrola VPC-190 Moving Magnetic (MM)
• UPC: 810033110870

8. Гарантыя і падтрымка

For warranty information, technical support, or service inquiries, please refer to the official Victrola webсайт або звярніцеся ў службу падтрымкі кліентаў. Захоўвайце чэк аб куплі для прэтэнзій па гарантыі.

Інтэрнэт-падтрымка: www.victrola.com/support