KAIWEETS KT360A

KAIWEETS KT360A Laser Level Instruction Manual

Model: KT360A

1. Важная інфармацыя па бяспецы

Please read and understand all safety instructions before operating this device. Failure to follow these instructions may result in laser radiation exposure or other hazards.

  • Лазерная бяспека: Do not point the laser directly into eyes. This product is a Class II laser device, with output power less than 1mW.
  • Пазбягайце прамога ўздзеяння на вочы лазернага прамяня.
  • Do not disassemble the device. Repairs should only be performed by authorized personnel.
  • Захоўвайце прыладу ў месцах, недаступных дзецям.

2. Прадукт скончыўсяview

The KAIWEETS KT360A is a 3x360 green line laser level designed for precise leveling and alignment tasks. It features high visibility green laser lines and self-leveling capabilities, making it suitable for various indoor and outdoor applications.

KAIWEETS KT360A Laser Level with green laser lines

Image: The KAIWEETS KT360A laser level emitting bright green 360-degree lines.

Асноўныя характарыстыкі:

  • 3 x 360° Green Laser Lines: One horizontal and two vertical lines provide full room coverage for floors, walls, and ceilings.
  • Высокая бачнасць: Green laser technology offers 4 times better visibility compared to red lasers.
  • Self-Leveling Function: Automatically levels within ±4° range.
  • Імпульсны рэжым: Allows use with a laser detector (not included) for extended range up to 196ft/60m in bright conditions.
  • Individual Line Control: Laser lines can be switched on and off independently.
  • Аксэсуары ў камплекце: Comes with a small adapter for fine adjustment and a telescopic tripod for versatile placement.

3. Змесціва ўпакоўкі

Праверце, ці ёсць усе прадметы ў вашай упакоўцы:

  • KAIWEETS KT360A Laser Level
  • Small Adapter (for fine adjustment)
  • Telescopic Tripod (Max height 3.7m/12.18ft)
  • Mounting Bracket with 1/4"-20 Mounting Thread and 5/8"-11 Thread Adapter (part of tripod kit)
  • Кіраўніцтва карыстальніка (гэты дакумент)
KAIWEETS KT360A Laser Level kit including laser, adapter, and tripod components

Image: Complete KAIWEETS KT360A kit, showing the laser level, adapter, and tripod components.

4. Настройка

4.1 Installing the Laser Level

  1. Ensure the laser level is placed on a stable, level surface or mounted securely.
  2. The device can be mounted onto a tripod using its standard mounting thread.
  3. For fine adjustments, attach the laser level to the provided adapter.
KAIWEETS KT360A Laser Level mounted on a magnetic bracket and a tripod

Image: Demonstrates multiple ways of placing the laser level, including on a magnetic bracket and a tripod.

4.2 Зборка штатыва

  1. Unfold the tripod legs and extend them to the desired height.
  2. Assemble the telescopic pole sections if using the full height.
  3. Attach the mounting bracket to the top of the pole.
  4. Secure the laser level to the mounting bracket using the 1/4"-20 thread. Use the 5/8"-11 thread adapter if necessary.
Components of the KAIWEETS telescopic tripod and mounting accessories

Image: The telescopic tripod components, including pole sections, base, and mounting bracket.

KAIWEETS KT360A Laser Level mounted on a fully extended tripod pole, projecting lines

Image: The KAIWEETS KT360A laser level mounted on the telescopic tripod, projecting horizontal and vertical lines on a wall.

4.3 Using the Adapter for Fine Adjustment

The small adapter allows for precise positioning of the laser level.

  • Attach the laser level to the adapter.
  • Use the micro knob on the adapter to rotate the laser level 360° clockwise or counterclockwise for horizontal alignment.
  • The adapter also provides X-axis and Y-axis adjustments for fine-tuning the laser line position within a 1 cm range.
Close-up of the KAIWEETS laser level adapter with adjustment knobs

Image: The small adapter for the laser level, showing its robust construction and adjustment knobs.

KAIWEETS laser level on adapter demonstrating 360-degree, X-axis, and Y-axis adjustments

Image: The laser level mounted on the adapter, illustrating its 360-degree rotation, X-axis, and Y-axis fine adjustment capabilities.

5. Інструкцыя па эксплуатацыі

5.1 Уключэнне/выключэнне і выбар рэжыму

  1. Уключэнне: Slide the main switch to the "ON" position. The laser level will automatically enter self-leveling mode.
  2. Рэжым самавыраўноўвання: When the pendulum is unlocked, the device will self-level. If the tilt angle exceeds 4°, the laser lines will flash rapidly to indicate an out-of-level condition.
  3. Manual Mode (Slope Mode): To use the device at an angle, lock the pendulum by sliding the main switch to the "OFF" position while the device is on. The laser lines will remain active but will not self-level, allowing for angled projections.
  4. Switching Laser Lines: Press the dedicated buttons on the control panel to cycle through horizontal and vertical laser lines independently.
  5. Імпульсны рэжым: Activate pulse mode for use with a laser detector in bright outdoor conditions. Refer to the device's specific button for pulse mode activation.
  6. Выключэнне: Slide the main switch to the "OFF" position to lock the pendulum and power off the device.
KAIWEETS KT360A Laser Level projecting multiple green lines on walls and floor in a room

Image: The laser level in operation, projecting a horizontal line and two vertical lines, creating a 90-degree cross-section on the wall and floor.

6. Тэхнічнае абслугоўванне

  • Уборка: Keep the laser level clean. Use a soft, damp тканінай для працірання вонкавай паверхні. Не выкарыстоўвайце абразіўныя ачышчальнікі або растваральнікі.
  • Сыход за лінзамі: Gently clean the laser output windows with a soft, lint-free cloth. Avoid scratching the lenses.
  • захоўванне: Store the device in its original carrying case in a dry, dust-free environment when not in use.
  • акумулятар: If the device uses removable batteries, remove them during long periods of storage to prevent leakage.
  • Каліброўка: Regular calibration checks are recommended to ensure accuracy, especially after drops or impacts.

7. Выпраўленне непаладак

праблемаМагчымая прычынаРашэнне
Laser lines are flashing rapidly.Device is out of its self-leveling range (>4° tilt).Place the laser level on a more level surface or adjust the tripod until the flashing stops.
No laser lines appear.Battery low or device not powered on.Check battery level and replace/recharge if necessary. Ensure the power switch is in the "ON" position.
Laser lines are dim or difficult to see.Bright ambient light or dirty laser output window.Use in lower light conditions, activate pulse mode with a detector, or clean the laser window.
Лазерныя лініі не з'яўляюцца прамымі або дакладнымі.Device is in manual mode or requires calibration.Ensure the pendulum is unlocked for self-leveling. If issues persist, contact customer support for calibration.

8. Тэхнічныя характарыстыкі

  • мадэль: КТ360А
  • Лазерны клас: Клас II, <1 мВт
  • Laser Color: Зялёны
  • Лазерныя лініі: 3 x 360° (1 Horizontal, 2 Vertical)
  • Дыяпазон самовыравнивания: ±4°
  • Pulse Mode Range: Up to 196ft/60m (with detector, not included)
  • Tripod Max Height: 3.7 м / 12.18 футаў
  • Рэгуляванне адаптара: 360° rotation, X/Y axis fine adjustment (within 1 cm)

9. Гарантыя і падтрымка

KAIWEETS provides a 3 год пасляпродажнага абслугоўвання for the KT360A laser level kit.

For technical support, warranty claims, or any questions regarding your product, please contact KAIWEETS customer service through their official channels or the retailer where the product was purchased.

Please have your model number (KT360A) and purchase information ready when contacting support.

© 2023 KAIWEETS. All rights reserved.