ANBERNIC RG351MP Handheld Game Console User Manual

1. Уводзіны

This manual provides detailed instructions for the ANBERNIC RG351MP Handheld Game Console. Please read this manual thoroughly before using the device to ensure proper operation and to maximize your gaming experience. Keep this manual for future reference.

2. Інфармацыя па бяспецы

• Не падвяргайце прыладу ўздзеянню экстрэмальных тэмператур, прамых сонечных прамянёў або высокай вільготнасці.
• Не кідайце прыладу і не падвяргайце яе моцным ударам.
• Трымайце прыладу далей ад вады і іншых вадкасцей.
• Не спрабуйце разбіраць або рамантаваць прыладу самастойна. Звярніцеся па дапамогу да аўтарызаванага сэрвіснага персаналу.
• Выкарыстоўвайце толькі зарадны кабель і адаптар, якія ўваходзяць у камплект.
• Забяспечце належную вентыляцыю падчас выкарыстання і зарадкі.
• This product contains a Lithium Polymer battery. Dispose of batteries responsibly according to local regulations.

3. Змесціва ўпакоўкі

Праверце наяўнасць усіх прадметаў у камплекце:

• 1 x RG351MP Game Console
• 1 x WIFI Module
• 1 x 64G SD Card
• 1 х USB-кабель для зарадкі
• 1 х Кіраўніцтва карыстальніка
• 1 х Пратэктар экрана
• 1 x Wipes

4. Прадукт скончыўсяview

Familiarize yourself with the various components and controls of your ANBERNIC RG351MP console.

Малюнак 4.1: Спераду View. This image displays the front of the ANBERNIC RG351MP console, featuring the 3.5-inch IPS screen, D-pad, action buttons (X, Y, A, B), SELECT and START buttons, and dual analog joysticks.

Figure 4.2: Console Layout. This image provides various angles of the console, highlighting the L1/L2/R1/R2 shoulder buttons, OTG and DC ports on the top, volume controls on the side, and TF/EXT, Reset, and TF2/EXT slots on the bottom.

Малюнак 4.3: Назад View. The rear of the console is shown, displaying the ANBERNIC logo, model number RG351MP, and regulatory markings. This view also indicates the location of the internal Li-Po battery.

Figure 4.4: Screen Display. This image emphasizes the console's 3.5-inch IPS screen with OCA full lamination and 640x480 resolution, providing a clear visual experience.

5. Настройка

5.1 Зарадка прылады

Before initial use, fully charge the console. Connect the provided USB charging cable to the DC port on the top of the console and the other end to a compatible USB power adapter (maximum load 2A). A full charge typically takes approximately 4 hours.

5.2 Устаўка карты памяці

The console supports dual TF card slots. The primary TF1/EXT slot is for the operating system and pre-installed games. The TF2/EXT slot can be used to expand storage up to 256GB for additional games.

1. Locate the TF1/EXT slot on the bottom of the console.
2. Gently insert the pre-installed 64GB TF card into the slot until it clicks into place.
3. If using an additional TF card for games, insert it into the TF2/EXT slot.

Figure 5.1: TF Card Insertion. This image illustrates the process of inserting a TF card into the console's expansion slot, demonstrating how to properly seat the card.

5.3 Уключэнне/выключэнне

• Каб уключыць: Press and hold the Power button (located on the side) for a few seconds until the screen illuminates.
• Каб выключыць: Press and hold the Power button until the power-off menu appears, then select "Shutdown" or "Power Off". Alternatively, a quick press of the Power button may put the device into sleep mode, depending on system settings.

5.4 Connecting the WIFI Module

The console supports an external WIFI module for network connectivity. Insert the provided WIFI module into one of the OTG USB ports (located on the top of the console). Once connected, you can configure network settings within the system menu.

6. Інструкцыя па эксплуатацыі

6.1 Асноўная навігацыя

• D-pad / Analog Joysticks: Use these to navigate through menus and control in-game characters.
• Кнопка: Confirm selection or perform primary action.
• Кнопка B: Go back or perform secondary action.
• X / Y Buttons: Perform specific in-game actions as defined by the game.
• Кнопка ПУСК: Pause game, open in-game menus, or confirm selections.
• Кнопка ВЫБАР: Access system menus or perform specific in-game functions.
• L1/L2/R1/R2 Buttons: Shoulder buttons for various in-game controls.

6.2 Game Selection and Launching

From the main menu, navigate to the desired game system (e.g., PS1, GBA, NES). Select a game from the list using the D-pad or analog stick and press the A button to launch it.

6.3 Saving and Loading Game States

Most emulators support "save states" which allow you to save your progress at any point in a game, independent of the game's internal save system. Refer to the specific emulator's hotkey combinations (often a combination of SELECT + L1/R1 or similar) for saving and loading states.

6.4 Налады сістэмы

Access the system settings menu (usually via the SELECT button or a dedicated menu option) to adjust:

• мова: Змяніць мову сістэмы.
• Дысплей: Adjust screen brightness, aspect ratio, and video filters.
• Гук: Control volume levels and audio output.
• Сетка: Configure Wi-Fi settings (requires external Wi-Fi module).
• Налады кантролера: Map buttons or calibrate joysticks.

6.5 Adding New Games

To add new games, you will need to transfer game ROMs to the TF2/EXT card. Ensure the ROMs are in a format supported by the console's emulators. Connect the TF2/EXT card to a computer using a card reader and copy the game files to the appropriate system folders on the card. After reinserting the card into the console, refresh the game list in the system menu.

7. Тэхнічнае абслугоўванне

7.1 Ачыстка прылады

Use a soft, dry, lint-free cloth to clean the console's exterior. For the screen, use a screen-specific cleaning solution and a microfiber cloth. Do not use abrasive cleaners or solvents.

7.2 Сыход за акумулятарам

• Пазбягайце частай поўнай разрадкі акумулятара.
• Захоўвайце прыладу ў прахалодным, сухім месцы, калі яна не выкарыстоўваецца працяглы час.
• If the device will not be used for a long time, charge it to about 50% before storing.

7.3 Абнаўленне праграмнага забеспячэння

Periodically check the official ANBERNIC website or community forums for firmware updates. Updates can improve performance, add features, or fix bugs. Follow the provided instructions carefully when performing any software updates.

8. Выпраўленне непаладак

9. Тэхнічныя характарыстыкі

10. Гарантыя і падтрымка

10.1 Інфармацыя аб гарантыі

ANBERNIC products are covered by a limited warranty. Please refer to the warranty card included in your package or visit the official ANBERNIC webпадрабязныя ўмовы гарантыі глядзіце на сайце. Захоўвайце пацвярджэнне пакупкі для прэтэнзій па гарантыі.

10.2 Падтрымка кліентаў

If you encounter any issues or have questions not covered in this manual, please contact ANBERNIC customer support. You can usually find contact information on the official ANBERNIC webна сайце або праз прадаўца, у якога вы набылі тавар.