Інструкцыя па эксплуатацыі душавой кабіны Hüppe Alpha 2 з бакавой панэллю

Уводзіны

This manual provides essential information for the safe and proper installation, operation, and maintenance of your Hüppe Alpha 2 Side Panel Walk-In Shower Enclosure. Please read all instructions carefully before beginning installation or use. Retain this manual for future reference.

Прадукт скончаныview

The Hüppe Alpha 2 Side Panel is a high-quality, fully framed walk-in shower enclosure designed for modern bathrooms. It features durable construction and flexible installation options.

Асноўныя характарыстыкі:

• Single side panel, fully framed design.
• Suitable for free-standing, floor-level installation.
• Constructed with high-quality anodized aluminum profiles.
• Compatible with both shower trays and tiled floors.
• Designed without an external handle.
• Allows for right or left-hand mounting.
• Supplied partially assembled for easier installation.
• Available with 2 mm Pacific S artistic glass or 4 mm tempered safety glass (DIN EN 12150).
• Optional Hüppe Anti-Plaque surface finish for tempered safety glass, facilitating easier cleaning.

Малюнак 1: Агульныя звесткі view of the Hüppe Alpha 2 Side Panel installed as part of a walk-in shower enclosure.

Інструкцыі па тэхніцы бяспекі

• Заўсёды апранайце адпаведныя сродкі індывідуальнай абароны (СІА) падчас усталёўкі, у тым ліку ахоўныя акуляры і пальчаткі.
• Ensure the installation area is clean, dry, and well-lit.
• Handle glass panels with extreme care to prevent breakage and injury. Tempered glass, while strong, can shatter into small pieces if damaged at the edges.
• Verify that the wall structure can support the weight of the shower enclosure.
• Do not use power tools near water or in damp conditions without proper safety precautions.
• Трымайце дзяцей і хатніх жывёл далей ад зоны ўстаноўкі.
• Перад выкарыстаннем пераканайцеся, што ўсе мацавання надзейна зацягнуты.
• Do not hang or apply excessive force to the shower panel once installed.

Настройка і ўстаноўка

The Hüppe Alpha 2 Side Panel is supplied partially assembled. Detailed assembly instructions and fixing materials are included with your delivery. It is highly recommended to consult a professional for measurement and installation to ensure optimal fit and performance.

Заўвагі перад устаноўкай:

• Unpack all components carefully and check against the packing list for completeness and any damage.
• Ensure the shower area dimensions are accurate. Note that the stated dimensions for the shower enclosure primarily refer to installation on shower trays.
• For floor-level installation, specific dimensions may differ. It is crucial to confirm the exact size of your shower area before proceeding with installation.
• Prepare the installation site by ensuring the floor and walls are level, clean, and structurally sound.

General Installation Steps (Refer to included manual for specifics):

1. пазіцыянаванне: Determine the desired orientation (right or left mounting) for the side panel.
2. профіfile Ўстаноўка: Замацаваць сцяну праfiles to the prepared wall using the provided fixing materials. Ensure they are plumb and level.
3. Размяшчэнне панэлі: Carefully insert the glass panel into the profiles.
4. Бяспека: Secure the panel within the profiles according to the specific instructions.
5. Ўшчыльненне: Apply appropriate silicone sealant to all joints and edges to ensure a watertight seal. Allow adequate curing time before use.
6. Канчатковыя праверкі: Verify the stability of the installed panel and check for any gaps or potential leak points.

Малюнак 2: Выпampле прафесіяналаfile and glass panel detail, illustrating the components involved in installation.

Інструкцыя па эксплуатацыі

The Hüppe Alpha 2 Side Panel is a fixed component of your shower enclosure and does not require active operation. Its function is to contain water within the shower area. Ensure that the panel is not subjected to excessive force or impact during use.

Тэхнічнае абслугоўванне

Regular cleaning and maintenance will preserve the appearance and longevity of your shower enclosure.

Уборка:

• Clean glass surfaces regularly with a soft cloth and a mild, non-abrasive glass cleaner.
• For panels with the optional Hüppe Anti-Plaque finish, cleaning is even easier. Simply wipe down with a soft cloth after each use to minimize water spots and limescale buildup.
• Clean aluminum profileы з мяккім, damp cloth. Avoid abrasive cleaners or scouring pads, which can damage the finish.
• Do not use harsh chemicals, solvents, or acidic cleaners, as these can damage the glass, profiles, or seals.
• Rinse thoroughly with clean water after cleaning to remove any cleaner residue.

Агульны догляд:

• Inspect seals and silicone joints periodically for signs of wear or damage. Replace if necessary to maintain watertightness.
• Ensure proper ventilation in the bathroom to reduce humidity and prevent mold growth.

Ліквідацыю непаладак

This section addresses common issues you might encounter with your shower enclosure.

If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact Hüppe customer support or a qualified professional.

Тэхнічныя характарыстыкі

Гарантыя і падтрымка

For information regarding product warranty, please refer to the documentation provided with your purchase or contact Hüppe customer service directly. The product is typically eligible for returns within 30 days of purchase, subject to the seller's return policy.

For technical support, spare parts, or further assistance, please contact the manufacturer:

Hüppe GmbH
www.hueppe.com

Please have your model number (AL1352087264) and purchase details ready when contacting support.