AeroCool HEXFORMBKV2 Micro ATX PC Case Instruction Manual

1. Прадукт скончыўсяview

The AeroCool HEXFORMBKV2 is a high-performance Micro ATX PC case designed for optimal ventilation and a modern aesthetic. It features a tempered glass side panel to showcase your internal components and a stylish front panel that highlights the included FRGB fans. This mini-tower case supports efficient air and liquid cooling solutions.

Асноўныя характарыстыкі:

• High-Performance Mini-Tower: Front panel designed for effective cooling, showcasing three fixed RGB fans.
• Expansive Cooling Support: Includes 3 FRGB fans (2 front, 1 rear) and supports liquid cooling at the front and rear.
• Micro ATX Compatibility: Supports Micro-ATX and Mini-ITX motherboards, CPU coolers up to 159 mm, and high-performance graphics cards up to 296 mm (without front radiator).
• Multimedia Access: Top panel features 1x USB 3.0 port, 2x USB 2.0 ports, microphone and HD audio jacks, and Reset/Power buttons.

2. Тэхнічныя характарыстыкі

3. Кіраўніцтва па наладцы

Follow these steps to properly install your components into the AeroCool HEXFORMBKV2 PC case.

3.1 Распакаванне

1. Асцярожна дастаньце корпус ПК з упакоўкі.
2. Remove any protective films or internal packaging materials.
3. Пастаўце корпус на ўстойлівую, роўную паверхню.

3.2 Устаноўка мацярынскай платы

1. Remove the tempered glass side panel by unscrewing the thumb screws.
2. Install the I/O shield (if not pre-installed on your motherboard) into the rear opening of the case.
3. Align your Micro ATX or Mini-ITX motherboard with the standoffs inside the case.
4. Замацуйце матчыну плату з дапамогай прадугледжаных шруб.

3.3 Устаноўка блока харчавання

1. Locate the power supply mounting area at the bottom rear of the case.
2. Slide your power supply unit (PSU) into the designated bay.
3. Замацуеце блок харчавання шрубамі з задняй часткі корпуса.

3.4 Усталёўка назапашвальніка

1. Identify the 3.5-inch drive bays within the case.
2. Mount your hard drives or SSDs into the appropriate bays and secure them with screws.

3.5 Expansion Card (GPU) Installation

1. Зніміце неабходныя вечкі слотаў пашырэння з задняй панэлі корпуса.
2. Insert your graphics card or other expansion cards into the PCIe slots on your motherboard.
3. Ensure the card is seated correctly and secure it with a screw. Note the maximum GPU length of 296 mm (without front radiator).

3.6 Сістэма астуджэння

The case comes with three pre-installed 120mm FRGB fans (two at the front, one at the rear). Additional fans or liquid cooling radiators can be installed as needed. Ensure proper airflow direction for optimal cooling.

3.7 Арганізацыя кабеляў

Выкарыстоўвайце адтуліны для пракладкі кабеляў і кропкі мацавання за паддонам матчынай платы, каб арганізаваць кабелі. Гэта паляпшае цыркуляцыю паветра і эстэтыку.

4. Інструкцыя па эксплуатацыі

4.1 Уключэнне/выключэнне

• To power on your PC, press the Магутнасць кнопка, размешчаная на верхняй панэлі.
• To power off, either shut down through your operating system or press and hold the Магутнасць кнопку на некалькі секунд.

4.2 Front Panel I/O Ports

The top panel provides convenient access to various ports:

• Порт USB 3.0 (x1): Для хуткаснай перадачы дадзеных.
• Парты USB 2.0 (x2): Для падключэння перыферыйных прылад.
• Раз'ём для мікрафона: Для ўводу гуку.
• HD Audio Jack: For audio output (headphones/speakers).
• Кнопка скіду: To restart the system. Note: This button may also cycle through FRGB lighting effects if connected to a compatible controller.

4.3 FRGB Fan Control

The pre-installed FRGB fans offer fixed RGB lighting. If your motherboard supports RGB control, you may be able to synchronize or change lighting effects via motherboard software. Otherwise, the Reset button might cycle through pre-set effects if wired accordingly.

5. Тэхнічнае абслугоўванне

Рэгулярнае тэхнічнае абслугоўванне дапамагае забяспечыць аптымальную прадукцыйнасць і даўгавечнасць кампанентаў вашага ПК.

5.1 Ачыстка пылавога фільтра

• The HEXFORMBKV2 features a mesh front panel and a top panel with a magnetic dust filter.
• Periodically remove and clean these filters to prevent dust buildup, which can hinder airflow and cooling efficiency.
• Use compressed air or a soft brush to remove dust.

5.2 Генеральная ўборка

• Працярыце вонкавую паверхню корпуса мяккай губкайamp тканіна. Пазбягайце абразіўных ачышчальнікаў.
• For the tempered glass panel, use a glass cleaner and a microfiber cloth to prevent scratches.

6. Выпраўленне непаладак

If you encounter issues with your PC case, consider the following common troubleshooting steps:

• Няма харчавання: Ensure all power cables (PSU to wall, PSU to motherboard, PSU to components) are securely connected. Check the power switch on the PSU.
• Вентылятары не круцяцца/RGB не працуе: Verify that the fan power cables and RGB cables are correctly connected to the motherboard or a fan/RGB controller. Consult your motherboard manual for proper header connections.
• Перагрэў: Ensure all fans are spinning correctly and are oriented to provide adequate airflow (intake/exhaust). Clean dust filters regularly. Check CPU cooler and GPU temperatures using monitoring software.
• Не працуюць парты пярэдняй панэлі: Check that the front panel I/O cables (USB, Audio, Power/Reset) are correctly connected to the corresponding headers on your motherboard.

For more complex issues, consult the manuals for your individual PC components (motherboard, GPU, PSU) or seek professional assistance.

7. Гарантыя і падтрымка

7.1 Інфармацыя аб гарантыі

The AeroCool HEXFORMBKV2 PC case comes with a Гарантыя 2 год for parts. Please retain your proof of purchase for warranty claims.

7.2 Тэхнічная падтрымка

For technical assistance, product inquiries, or warranty claims, please visit the official AeroCool website or contact their customer support. You can typically find contact information on the manufacturer's webсайце або ва ўпакоўцы прадукту.

• Афіцыйны прадстаўнік AeroCool Webсайт: www.aerocool.io
• Адрас падтрымкі кліентаў: support@aerocool.io (Напрample, please verify on official webсайт)