Gravity Warzone WZ10US Subwoofer Instruction Manual

1. Прадукт скончыўсяview

The Gravity Warzone WZ10US is a 10-inch active compact subwoofer designed to fit discreetly within your vehicle's spare tire hub, providing powerful bass without occupying valuable cargo space. Its robust die-cast aluminum housing ensures durability and stable low-end extension, while the 10-inch feather-light fiberglass woofer cone delivers fast, tight, and deep bass with minimal distortion.

Асноўныя характарыстыкі:

• Кампактны дызайн: Specifically engineered to fit inside a 10-inch spare tire, saving trunk space.
• Высокая выхадная магутнасць: Delivers up to 1000 Watts of peak power for deep and impactful bass.
• 2 Ohm Voice Coil: Прапануе гнуткія варыянты падключэння для розных ampналады Lifier.
• Die-Cast Aluminum Housing: Provides excellent density and strength for stable performance and heat dissipation.
• Інтэграваныя элементы кіравання: Features phase shift, low pass filter, and bass boost adjustments for optimal sound tuning.
• Правадной пульт дыстанцыйнага кіравання: Дазваляе зручна рэгуляваць узровень басаў з сядзення кіроўцы.
• Аўтаматычнае ўключэнне/выключэнне: For high-level connections, simplifying integration with factory head units.

Figure 1.1: The Gravity Warzone WZ10US active subwoofer with its wired remote control.

2. Важная інфармацыя па бяспецы

Please read all instructions carefully before installation and use. Failure to follow these guidelines may result in injury, damage to the product, or damage to your vehicle.

• Рэкамендуецца прафесійная ўстаноўка: If you are unsure about any aspect of installation, consult a qualified car audio technician.
• Адключэнне сілкавання: Заўсёды адключайце адмоўны вывад акумулятара аўтамабіля перад пачаткам любых электрамантажных работ, каб пазбегнуць кароткага замыкання і паражэння электрычным токам.
• Правільная электраправодка: Ensure all wiring connections are secure and properly insulated to prevent shorts and fire hazards. Use appropriate gauge wire for power and ground connections.
• Вентыляцыя: Although designed for compact spaces, ensure the subwoofer has adequate ventilation to prevent overheating. Do not block any vents.
• Бяспека мантажу: Securely mount the subwoofer to prevent it from shifting during vehicle movement, which could cause injury or damage.
• Узроўні гучнасці: Працяглае ўздзеянне высокай гучнасці можа пашкодзіць слых. Адрэгулюйце гучнасць адказна.
• Ўздзеянне вады: This product is not waterproof. Avoid exposing it to moisture or liquids.

3. Што ў скрынцы

Перад пачаткам усталёўкі пераканайцеся, што ўсе кампаненты наяўныя:

• Gravity Warzone WZ10US 10" Active Subwoofer
• Правадной пульт дыстанцыйнага кіравання
• Power/Speaker Input Harness
• Mounting Hardware (screws, brackets, foam pads)
• Кіраўніцтва карыстальніка (гэты дакумент)

4. Усталёўка і налада

The WZ10US subwoofer is designed for installation within the hub of your vehicle's spare tire. Ensure your spare tire well has sufficient depth and diameter to accommodate the unit.

4.1 Размяшчэнне і мантаж

1. Locate your vehicle's spare tire well. Remove the spare tire and any existing tools or covers.
2. Place the WZ10US subwoofer into the center of the spare tire. Ensure it sits flush and does not interfere with the tire's structure or the vehicle's trunk floor cover.
3. Utilize the provided mounting hardware to secure the subwoofer. The subwoofer is designed to be held in place by the spare tire's central bolt or a similar securing mechanism. If your vehicle uses a plastic post, you may need to adapt the mounting. The subwoofer has a central threaded insert on its underside for this purpose.
4. Apply the foam pads to the contact points of the mounting brackets to prevent rattles and provide a snug fit.

Figure 4.1: Subwoofer positioned within a spare tire well.

Figure 4.2: Underside of the subwoofer showing the central mounting point and connection ports.

4.2 Правадныя злучэнні

Before making any electrical connections, ensure the vehicle's negative battery terminal is disconnected.

• Магутнасць (B+): Connect the main power wire (typically red) from the subwoofer's harness to the vehicle's positive battery terminal. Use an in-line fuse (not included, recommended 15A) as close to the battery as possible.
• Зямля (GND): Connect the ground wire (typically black) from the subwoofer's harness to a clean, unpainted metal surface on the vehicle's chassis. Ensure a good electrical connection.
• Дыстанцыйнае ўключэнне (REM):
  • Нізкаўзроўневы ўваход (RCA): If using RCA inputs from an aftermarket head unit, connect the remote turn-on wire from the head unit to the REM terminal on the subwoofer's harness.
  • Высокаўзроўневы ўваход (узровень дынаміка): If connecting directly to factory speaker wires, the subwoofer features an auto power on/off function. In this case, the REM wire may not be needed, or it can be connected to an accessory power source that turns on with the ignition.
• Аўдыё ўваход:
  • Уваход RCA: Connect RCA cables from your head unit's subwoofer or full-range pre-outs to the RCA input jacks on the subwoofer.
  • Увод высокага ўзроўню: Use the provided speaker-level input harness to connect directly to your vehicle's speaker wires. This is ideal for factory head units without RCA outputs.

Figure 4.3: Top panel of the subwoofer with input and control connections.

4.3 Remote Control Connection

Connect the wired remote control to the designated port on the subwoofer. Route the cable to a convenient location near the driver's seat for easy access to the bass level control.

Figure 4.4: Wired remote control for bass level adjustment.

5. Інструкцыя па эксплуатацыі

Once installed and wired, you can adjust the subwoofer's settings for optimal performance.

5.1 Першапачатковае ўключэнне

After all connections are made, reconnect the vehicle's negative battery terminal. Turn on your car's ignition and audio system. The subwoofer should power on, indicated by the power LED on the remote control (if connected) or on the unit itself.

5.2 Рэгуляванне элементаў кіравання

The WZ10US features several adjustable controls to fine-tune its output to your vehicle's acoustics and personal preference. These controls are typically located on the subwoofer's top panel (refer to Figure 4.3).

• Gain Control: Adjusts the input sensitivity of the subwoofer. Start with the gain at minimum and slowly increase it until the bass blends well with your main speakers without distortion.
• Фільтр нізкіх частот (LPF): Controls the upper frequency limit that the subwoofer will play. Frequencies above this setting will be filtered out. Adjust this between 40Hz and 150Hz to blend smoothly with your main speakers. A common starting point is 80Hz.
• Зрух фазы: Compensates for time alignment problems in the system. If the bass sounds weak or out of sync, try switching the phase between 0° and 180°. Choose the setting that provides the most impactful and cohesive bass.
• Павышаны бас: Increases the sound level of specific low frequencies (0 to 12 dB). Use this sparingly to add more punch to the bass. Excessive bass boost can lead to distortion.
• Дыстанцыйнае кіраванне ўзроўнем: The wired remote allows you to conveniently adjust the overall bass volume from your listening position without accessing the subwoofer directly.

6. Тэхнічнае абслугоўванне

The Gravity Warzone WZ10US subwoofer requires minimal maintenance.

• Уборка: Use a soft, dry cloth to wipe down the exterior of the subwoofer. Do not use harsh chemicals, solvents, or abrasive cleaners.
• Сувязі: Перыядычна правярайце ўсе злучэнні правадоў, каб пераканацца ў іх надзейнасці і адсутнасці карозіі.
• Вентыляцыя: Пераканайцеся, што вакол сабвуфера няма перашкод, каб забяспечыць належны адвод цяпла.

7. Выпраўленне непаладак

If you experience issues with your subwoofer, consult the following table before contacting support.

8. Тэхнічныя характарыстыкі

9. Гарантыя і падтрымка кліентаў

The Gravity Warzone WZ10US subwoofer comes with a Абмежаваная гарантыяКанкрэтныя ўмовы і тэрмін гарантыі могуць адрознівацца ў залежнасці ад рэгіёна і прадаўца. Калі ласка, захавайце пацвярджэнне пакупкі для прэтэнзій па гарантыі.

For Technical Support or Warranty Claims:

Please contact the retailer where you purchased the product or visit the official Gravity website for contact information and support resources. When contacting support, please have your product model number (WZ10US) and proof of purchase readily available.