YONGNUO YN24EX TTL Macro Flash Speedlite Instruction Manual

1. Прадукт скончыўсяview

The YONGNUO YN24EX is a dedicated TTL macro flash speedlite designed for Canon DSLR cameras. It features a double-tube macro flash design, allowing for flexible lighting control and creative macro photography. This unit supports E-TTL functions and offers precise flash ratio adjustments for optimal lighting in close-up scenarios.

Image: The YONGNUO YN24EX macro flash kit, including the main control unit, two flash heads, four adapter rings, and a protective nylon bag.

Асноўныя характарыстыкі:

• E-TTL Functions: Supports Exposure Compensation (FEC), Flash Exposure Bracketing (FEB), Front and Rear-curtain sync, Flash Exposure Lock (FE lock), and Modeling Light. Accessible through Canon camera menus.
• Double-Tube Macro Flash: Features two independent flash heads with adjustable flash ratios (1/128-1/1, 22 levels of fine tuning). Tube A and Tube B can flash individually for varied lighting effects.
• Flexible Flash Coverage: Vertical angle: Upwards/downwards 90 degrees; Horizontal angle: inwards 60 degrees, outwards 30 degrees. Adapter ring rotation: upwards 50 degrees, downwards 30 degrees. Flash tubes can be mounted on a tripod.
• Ultra-fast Recycle System: Approximately 3 seconds at full output with new batteries.
• LED Focus Assist Light: Features low light and highlight modes for rapid and precise focusing.
• Вялікі ВК-дысплей: Provides clear visual feedback for flash function settings.
• PC Sync Interface: Standard PC synchronous interface for wired flash synchronization.
• Sound Prompt System: Provides audio cues for different operating conditions (can be turned off).
• Automatic Settings Saving: Retains current operating settings for convenience.

2. Кіраўніцтва па наладцы

2.1 Што ў камплекце

Перад пачаткам пераканайцеся, што ўсе кампаненты наяўныя:

• 1 x YONGNUO YN24EX Macro Flash Unit
• 4 x Adapter Rings (52mm, 58mm, 67mm, 72mm)
• 1 x Mount Ring
• 1 x Protecting Nylon Bag
• 1 х Кіраўніцтва карыстальніка (англійская і кітайская)

Image: Contents of the YN24EX package.

2.2 Устаноўка батарэі

The YN24EX requires 4 AA alkaline batteries or AA Ni-MH rechargeable batteries (not included). Open the battery compartment cover on the main control unit, insert the batteries according to the polarity indicators, and close the cover securely.

2.3 Мацаванне да камеры

1. Slide the main control unit onto your Canon DSLR camera's hot shoe mount.
2. Secure the unit by rotating the locking mechanism on the hot shoe foot until it is firm.

Image: Detail of the hot shoe mount for camera attachment.

Image: YN24EX mounted on a Canon DSLR camera.

2.4 Attaching Flash Heads and Adapter Rings

1. Select the appropriate adapter ring (52mm, 58mm, 67mm, or 72mm) that matches your camera lens filter size.
2. Screw the chosen adapter ring onto the front of your camera lens.
3. Attach the mount ring to the adapter ring.
4. Connect the two flash heads to the mount ring. The flash heads are connected to the main control unit via coiled cables.

3. Інструкцыя па эксплуатацыі

3.1 Уключэнне/выключэнне сілкавання

Press and hold the power button on the main control unit to turn the flash on or off. The LCD display will illuminate upon power-on.

3.2 Flash Modes (TTL, M)

Націсніце РЭЖЫМ button to cycle through available flash modes:

• Рэжым TTL: (Through-The-Lens) The flash automatically determines the appropriate light output based on the camera's metering system. This is the recommended mode for most users.
• Рэжым M: (Manual) Allows you to manually set the flash output power. Use the control dial to adjust the power level.

3.3 Flash Ratio Adjustment (A:B)

In TTL mode, you can adjust the flash ratio between the two flash tubes (A and B) to create specific lighting effects. Press the РАЦЫЁН button and use the control dial to set the desired ratio (e.g., 8:1, 4:1, 1:1, 1:4, 1:8). This allows for emphasizing one side of the subject over the other.

Image: Control panel displaying ETTL mode and flash ratio settings.

3.4 E-TTL Functions

The YN24EX supports various E-TTL functions accessible through your Canon camera's menu:

• FEC (кампенсацыя экспазіцыі ўспышкі): Рэгулюе магутнасць успышкі для дакладнай налады экспазіцыі.
• FEB (Брэкетынг экспазіцыі ўспышкі): Takes multiple shots at different flash exposure levels.
• Front/Rear-curtain Sync: Synchronizes the flash with the beginning or end of the shutter exposure.
• FE Lock (Flash Exposure Lock): Locks the flash exposure for recomposing.
• Мадэлюючае святло: Emits a continuous light to preview the lighting effect before taking the shot.

3.5 LED Focus Assist Light

The built-in LED focus assist light helps achieve precise focus in low-light conditions. Press the L·LED·R button to activate and cycle between low light and highlight modes. This feature is particularly useful for macro photography where focusing can be challenging.

Image: Flash heads providing illumination, demonstrating the LED assist light capability.

3.6 Sound Prompt System

The YN24EX features a sound prompt system that provides audible feedback for various operations (e.g., recycle complete). This allows you to focus on shooting without constantly checking the display. To enable or disable the sound, refer to the specific instructions in the full user manual or the device's menu.

3.7 PC Sync Interface

The unit is equipped with a standard PC synchronous interface. This allows for wired synchronization with cameras or triggers that support a PC sync port, offering an alternative to hot shoe mounting for flash triggering.

3.8 Automatic Settings Saving

The YN24EX automatically saves your last used settings. This ensures that your preferred configurations are retained even after the unit is powered off and on, streamlining your workflow.

4. Тэхнічнае абслугоўванне

4.1 Ачыстка

To maintain optimal performance, regularly clean the flash unit. Use a soft, dry cloth to wipe the exterior. For stubborn dirt, a slightly damp cloth can be used, followed by a dry cloth. Avoid using strong solvents or abrasive cleaners.

4.2 Сыход за акумулятарам

• Каб пазбегнуць уцечкі батарэек, выміце іх, калі ўспышка не будзе выкарыстоўвацца працяглы час.
• Use high-quality AA alkaline or Ni-MH rechargeable batteries.
• Пераканайцеся ў правільнай палярнасці батарэі падчас усталёўкі.

4.3 Захоўванне

Store the YN24EX in a cool, dry place, away from direct sunlight and extreme temperatures. Use the provided protective nylon bag to prevent dust and scratches.

5. Выпраўленне непаладак

If you encounter issues with your YN24EX, consider the following common solutions:

• Успышка не спрацоўвае: Check battery levels. Ensure the flash is securely mounted to the camera's hot shoe. Verify camera and flash settings are compatible (e.g., flash enabled in camera menu).
• Няправільная экспазіцыя: Adjust FEC (Flash Exposure Compensation) in your camera menu or flash settings. Ensure flash mode (TTL/M) is appropriate for your shooting conditions. Check flash ratio settings.
• Павольны час перапрацоўкі: Replace old batteries with fresh ones or fully charge rechargeable batteries.
• Flash heads not working: Ensure cables are securely connected to the main unit and flash heads.

For persistent issues, consult the comprehensive user manual or contact YONGNUO customer support.

6. Тэхнічныя характарыстыкі

7. Гарантыя і падтрымка

For information regarding product warranty, please refer to the warranty card included with your purchase or visit the official YONGNUO webсайт. Умовы гарантыі могуць адрознівацца ў залежнасці ад рэгіёна і прадаўца.

Should you require technical assistance or customer support, please contact your retailer or the YONGNUO customer service department. Contact details can typically be found on the manufacturer's webсайце або ва ўпакоўцы прадукту.