EMKE THE230W-ADR

EMKE 300W Heating Element for Bathroom Radiators - Model THE230W-ADR Instruction Manual

Stainless Steel Heating Cartridge with Thermostat

1. Уводзіны

Thank you for choosing the EMKE 300W Heating Element. This product is designed to provide efficient and controlled heating for your bathroom radiators and towel warmers. This manual contains important information regarding the safe installation, operation, and maintenance of your heating element. Please read it thoroughly before use and retain it for future reference.

2. Інструкцыі па тэхніцы бяспекі

Каб забяспечыць бяспечную працу і пазбегнуць пашкоджанняў, калі ласка, выконвайце наступныя меры бяспекі:

  • Электрабяспека: Ensure the power supply matches the specifications (220-240V 50Hz). Always disconnect power before installation or maintenance. Installation should be performed by a qualified electrician if you are unsure.
  • Ахова вады: The heating element has an IP44 protection rating, meaning it is protected against solid objects larger than 1mm and splashing water from any direction. However, it should not be submerged in water.
  • Правільная ўстаноўка: The heating element must be installed vertically at the bottom of the radiator/towel warmer. Ensure the G1/2 connection thread is securely sealed to prevent leaks.
  • тэмпература: The surface of the heating element and radiator can become hot during operation. Avoid direct contact to prevent burns.
  • Дзеці і хатнія жывёлы: Keep children and pets away from the operating heating element.
  • Прызначэнне: Use this product only for its intended purpose as a heating element for bathroom radiators and towel warmers.

3. Асаблівасці прадукту

  • Выходная магутнасць: 300W, suitable for radiators with a power requirement below 600W.
  • матэрыял: Constructed from high-quality 304 stainless steel for rapid heating, rust resistance, and corrosion resistance.
  • Інтэграваны тэрмастат: Allows for easy control of heating time and temperature.
  • Рэгуляваны дыяпазон тэмператур: ад 30°C да 70°C.
  • Функцыя таймера: Includes 2-hour and 4-hour timer settings.
  • Ступень абароны: IP44 for splash water protection.
  • Дызайн кабеля: Spiral cable for neat and flexible connection.

4. Тэхнічныя характарыстыкі

АсаблівасцьСпецыфікацыя
Нумар мадэліTHE230W-ADR
Магутнасць300 Вт
тtage220-240 В 50 Гц
Heating Bar Size392 х Φ12 мм
Даўжыня кабеля700 - 1400 мм
КолерБелы
МатэрыялНержавеючая сталь 304
Ступень абароныIP44
Узровень абароныІ клас
Нітка злучэнняG1/2
Макс. Працоўнае ціск10 бар
Памеры прадукту (Д х Ш х У)38 х 6 х 4 см
Вага прадмета480 г

5. Настройка і ўстаноўка

Before installation, ensure the radiator system is drained and depressurized. The heating element is designed for vertical installation at the bottom of your towel warmer or electric radiator.

  1. Select the Correct Heating Element: Ensure the 300W heating element is appropriate for your radiator. It is suitable for radiators with a power output below 600W. Refer to the table below for guidance on matching heating element power to radiator heat output.
  2. Prepare the Radiator: Locate the G1/2 connection port at the bottom of your radiator. Ensure it is clean and free of debris.
  3. Insert the Heating Element: Carefully screw the heating element into the G1/2 connection port. Use appropriate tools to tighten it securely, ensuring a watertight seal. Do not overtighten.
  4. пазіцыянаванне: The heating element must always be mounted at the lowest point of the towel rail/radiator to ensure proper heat distribution and prevent overheating.
  5. Электрычнае падключэнне: Once the heating element is physically installed, connect the power plug to a suitable 220-240V 50Hz electrical outlet. Ensure the outlet is properly grounded and protected by a residual current device (RCD).
Installation diagram showing the heating element being screwed into the bottom of a towel warmer.
Малюнак 1: Схема ўстаноўкі. The heating element is inserted into the bottom connection of the towel warmer.
Chart showing recommended heating element power based on radiator heat output, with different heating element lengths.
Figure 2: Heating Element Selection Guide. This image illustrates different heating element lengths (392mm for 300W, 618mm for 600W, 830mm for 900W, 820mm for 1200W) and a table recommending heating element power based on radiator heat output. For example, a 300W element is recommended for radiators under 600W.
Technical drawing of the heating element with dimensions, showing a diameter of 12mm and various lengths.
Малюнак 3: Тэхнічныя памеры. Detailed drawing showing the heating element's dimensions, including a 12mm diameter and the control unit's measurements.

6. Інструкцыя па эксплуатацыі

The EMKE heating element features an intuitive control panel with an LCD display for easy temperature and timer adjustments.

Close-up of the heating element's control panel with LCD display, showing temperature and timer settings.
Figure 4: Thermostat Control Panel. This image highlights the LCD display and control buttons for temperature and timer settings. The thermostat adjustment range is 30°C to 70°C, with timer options for 2 hours and 4 hours.
Падрабязны view of the control panel buttons: Power, Temperature/Time Decrease, Temperature/Time Increase, and Mode Change.
Figure 5: Control Button Functions. This image labels the buttons on the control panel: Power button, Temperature/Time Decrease button (-), Temperature/Time Increase button (+), and Mode Change button (arrow icon).
  1. Уключэнне/выключэнне харчавання: Націсніце Кнопка харчавання (⏻) to turn the heating element on or off. The LCD display will illuminate when active.
  2. Рэгуляванне тэмпературы: When the heating element is on, press the Temperature/Time Increase (+) or Паменшыць (-) buttons to set your desired temperature between 30°C and 70°C. The set temperature will be displayed on the LCD.
  3. Ўстаноўка таймера: Націсніце Mode Change button (↶) to cycle through the timer options (2H, 4H, or continuous heating). The selected timer duration will be shown on the LCD. The heating element will operate for the set duration and then turn off automatically.
  4. Continuous Heating: If no timer is selected, the heating element will operate continuously at the set temperature until manually turned off.
Comparison of a waterproof mechanical button control panel versus a non-waterproof one, highlighting the sealed surface.
Figure 6: Waterproof Mechanical Button. This image shows the waterproof design of the control panel, where the button surface is covered with a waterproof film, ensuring durability and safety in a bathroom environment.

7. Тэхнічнае абслугоўванне

Regular maintenance ensures the longevity and efficient operation of your EMKE heating element.

  • Уборка: Before cleaning, always unplug the heating element from the power outlet. Use a soft, damp cloth to wipe the surface of the heating element and control panel. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electronic components.
  • агляд: Periodically check the power cable for any signs of damage (fraying, cuts). Inspect the connection point to the radiator for any leaks or corrosion. If any damage is found, discontinue use and contact customer support.
  • захоўванне: If the heating element will not be used for an extended period, unplug it and ensure it is clean and dry before storing.

8. Выпраўленне непаладак

If you encounter issues with your EMKE heating element, refer to the following common problems and solutions:

праблемаМагчымая прычынаРашэнне
Heating element does not turn on.Няма крыніцы харчавання.
Няспраўная разетка.		Check if the plug is securely inserted.
Праверце разетку з дапамогай іншай прылады.
Праверце выключальнік.
Heating element is on but not heating.Усталявана занадта нізкая тэмпература.
Air in the radiator system.
Няспраўнасць награвальнага элемента.		Павялічце зададзеную тэмпературу.
Bleed the radiator to remove air.
Звярніцеся ў службу падтрымкі, калі праблема не знікне.
Функцыя таймера працуе неналежным чынам.Няправільная ўстаноўка таймера.Ensure the correct timer duration (2H or 4H) is selected using the Mode Change button.
Water leakage at the connection point.Няшчыльнае злучэнне.
Пашкоджаная пячатка.		Ensure the heating element is securely tightened.
Check the G1/2 seal and replace if damaged. Consult a professional if necessary.

If these solutions do not resolve the issue, please contact EMKE customer support for further assistance.

9. Гарантыя і падтрымка

EMKE products are manufactured to high-quality standards. For information regarding warranty coverage and terms, please refer to the documentation provided with your purchase or visit the official EMKE webсайт.

For technical support, troubleshooting assistance, or spare parts inquiries, please contact EMKE customer service. Have your model number (THE230W-ADR) and purchase details ready when contacting support.

EMKE Customer Service: Please refer to your purchase receipt or the EMKE official webсайт для кантактнай інфармацыі, якая адпавядае вашаму рэгіёну.