NADAMOO Wireless Barcode Scanner Bur3003 User Manual

1. Уводзіны

This manual provides detailed instructions for the setup, operation, and maintenance of your NADAMOO Wireless Barcode Scanner, model Bur3003. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.

Image 1.1: NADAMOO Wireless Barcode Scanner Bur3003 with its USB receiver.

2. Асаблівасці прадукту

• Бесправадная перадача: Up to 400m (437 yd) in open air, 100m (328 ft) indoors.
• Тэрмін службы батарэі: 2600mAh rechargeable battery, providing approximately 35 hours of continuous scanning or 30 days of daily use (2000 scans/day).
• Рэжымы падлучэння: Wireless (via USB dongle) and Wired (via USB cable).
• Paring Modes: One-to-one (one scanner to one receiver) and Multiple-to-one (multiple scanners to one receiver).
• Рэжымы працы: Instant Upload Mode and Storage Mode (up to 100,000 barcodes).
• Рэжымы сканавання: Manual trigger scan or Automatic continuous scan.
• Сумяшчальнасць: Works with Windows, Mac OS, and Linux operating systems. Requires USB port.

3. Кіраўніцтва па наладцы

3.1 Першапачатковая зарадка

Before first use, ensure the scanner has sufficient power. The red indicator light on top of the scanner will flash three times if the power is below 30%. Please charge the scanner immediately. The red light will flash continuously during charging and turn off when fully charged. A full charge takes approximately 4 to 5 hours.

Малюнак 3.1: Ёмістасць батарэі і працягласць выкарыстання.

3.2 Метады падключэння

The scanner supports both wireless and wired connections.

Image 3.2: Available connection methods and device compatibility.

3.2.1 Бесправадное злучэнне

1. Падключыце USB-прыёмнік да вольнага порта USB на вашым кампутары.
2. Within 30 seconds of plugging in the receiver, scan the following configuration barcodes in order:

Image 3.3: Barcodes for initial wireless setup.

• Сканаваць 'Restore default' штрых-код.
• Сканаваць 'Match' штрых-код.
• Сканаваць 'Instant upload mode' штрых-код.
• Сканаваць 'USB_HID' штрых-код.

Заўвага: If the pairing fails (indicated by a 'di-en' sound), unplug the USB receiver, plug it back in, and rescan the 'Match' barcode.

The wireless frequency offers freedom of movement. The transmission distance can reach up to 400m (437 yd) in an open, barrier-free environment and up to 100m (328 ft) in environments with obstacles.

Image 3.4: Wireless transmission range capabilities.

3.2.2 Правадное злучэнне

Connect the scanner directly to your device using the provided USB cable. In wired mode, the scanner can be used while charging.

3.3 Рэжымы спалучэння

Сканер падтрымлівае дзве канфігурацыі спалучэння:

• One Scanner-to-One Receiver: Each scanner transmits data to its dedicated USB receiver. Multiple units can operate independently in the same area without interference.
• Multiple Scanners-to-One Receiver: Up to 32 scanners can transmit data to a single USB receiver. This is suitable for environments where multiple users scan to one central computer.

Image 3.5: Illustration of one-to-one and multiple-to-one pairing modes.

4. Інструкцыя па эксплуатацыі

4.1 Рэжымы сканавання

Сканер прапануе два асноўныя рэжымы сканавання:

• Рэжым імгненнай загрузкі: Barcode data is transmitted to your connected device immediately after scanning.
• Рэжым захоўвання: Barcodes are stored in the scanner's internal memory (up to 100,000 codes) and can be uploaded to your device later. This is useful when operating outside the wireless transmission range.

Image 4.1: Instant Upload and Storage Modes.

Additionally, you can choose between manual trigger scanning or automatic scanning:

• Ручное сканаванне: Націсніце кнопку запуску, каб пачаць кожнае сканаванне.
• Аўтаматычнае сканаванне: The scanner continuously scans without requiring a button press. Refer to the full user manual for the specific barcode command to switch to automatic mode.

Image 4.2: Two scanning modes.

4.2 Падтрымліваемыя тыпы штрых-кодаў

The NADAMOO Bur3003 scanner is designed to read 1D linear barcodes. It is not compatible with 2D barcodes such as QR codes, Data Matrix, MaxiCode, PDF417, or Aztec codes.

Image 4.3: Supported 1D barcode types.

The scanner supports various 1D barcode formats, including reverse barcodes and those with 2 or 5 extra codes.

Малюнак 4.4: Прыкладamples of supported 1D barcode variations.

4.3 Дадатковыя налады

The scanner offers several customizable settings, configurable by scanning specific barcodes found in the comprehensive user manual.

• Adjustable Beep: Control the volume of the scan confirmation beep (High, Medium, Low, Off).
• Рэгуляваная хуткасць: Modify the scanning speed.
• Моўная падтрымка: Supports 25 languages, including English, German, Spanish, French, Italian, and Brazilian Portuguese.
• Duplicate Barcode Detection: Enable or disable detection of duplicate barcode scans.
• Intelligent Group Data Editing: Configure prefix/suffix addition, character deletion, and embedding characters between data based on barcode type or specific location.

Adjustable Beep

Рэгуляваная хуткасць

Support for 25 Languages

Duplicate Barcode Detection

Image 4.5: Intelligent Group Data Editing features.

5. Тэхнічнае абслугоўванне

5.1 Сыход за акумулятарам

The scanner is equipped with a 2600mAh Lithium Ion battery. To maximize battery life:

• Charge the scanner fully before its first use.
• Пазбягайце рэгулярнай поўнай разрадкі акумулятара.
• Захоўвайце сканер у прахалодным, сухім месцы, калі ён не выкарыстоўваецца працяглы час.

5.2 Ачыстка

Use a soft, dry cloth to clean the scanner's exterior. Do not use abrasive cleaners or solvents, as these can damage the device.

6. Выпраўленне непаладак

6.1 Scanner Not Reading Barcodes Accurately

If the scanner is not reading barcodes correctly or producing unexpected results:

• Incorrect Barcode Type: Ensure the scanner is configured for the specific barcode type you are scanning. Refer to the full user manual for barcode commands to switch between types.
• Damaged Barcode: The barcode might be damaged, smudged, or poorly printed. Try scanning a different, known-good barcode.
• Quiet Zones: Ensure there is sufficient clear space (quiet zones) around the barcode. The scanner requires at least 1/4 inch of clear space on both sides of a 1D barcode.
• Check Digit Issues: If the scanner expects a check digit and the barcode does not have one, or vice versa, it may fail to scan. Adjust settings if necessary.

Image 6.1: Common reasons for barcode reading failures.

6.2 Праблемы з бесправадным падключэннем

• Паўторнае спалучэнне: If the scanner loses connection, unplug the USB receiver, plug it back in, and rescan the 'Match' barcode (refer to Section 3.2.1).
• радыёчастотныя перашкоды: Wireless performance can be affected by radio frequency (RF) noise from other devices or the computer itself. If experiencing intermittent connection, try using a USB extension cable to position the receiver away from the computer's main chassis.
• Адлегласць/Перашкоды: Ensure the scanner is within the effective transmission range (100m indoors, 400m open air) and minimize physical obstacles between the scanner and receiver.

6.3 Compatibility with Square POS

The NADAMOO Bur3003 scanner is not fully compatible with Square POS systems. While it can scan item barcodes into a search box, you may need to manually select the item to add it to a transaction. Square POS often uses its own custom scanners.

7. Тэхнічныя характарыстыкі

8. Гарантыя і падтрымка

For warranty information or technical support, please refer to the product packaging or contact NADAMOO customer service directly. Contact details can typically be found on the manufacturer's official webна сайце або праз месца пакупкі.